- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (36)
- Bancos de postgiro (3)
- Camas inclinadas CNC (2)
- Centros de torneado CNC (159)
- Centros de torneado horizontal (20)
- Centros de torneado verticales (5)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (9)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (180)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (13)
- Tornos cíclicos (40)
- Tornos cíclicos CNC (44)
- Tornos CNC (492)
- Tornos con husillo de cilindrar y roscar (289)
- Tornos de barras (7)
- Tornos de doble husillo CNC (13)
- Tornos de husillos excavados (1)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (61)
- Tornos de plato horizontal CNC (35)
- Tornos de precisión (5)
- Tornos de puntas (3)
- Tornos de refrentar (15)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (2)
- Tornos especiales (2)
- Tornos horizontales (5)
- Tornos para mecánicos (25)
- Tornos pesados (28)
- Tornos revólver (4)
- Tornos universales (31)
- Tornos universales de Ø más de 800 mm (7)
- Tornos universales hasta Ø 800 mm (12)
- Tornos verticales (84)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (3)
- Tronzadoras (8)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (2)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (2)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (18)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (33)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (55)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (15)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- Dimitrov (2)
- DINN SPINNING LATHE (1)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
Año de construcción: 2005
usado
There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.
Año de construcción: 2005
usado
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
Año de construcción: 1956
usado
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
Año de construcción: 1987
usado
Año de construcción: 1977
usado
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Año de construcción: 1972
usado
Año de construcción: 2000
usado
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.
Año de construcción: 1996
usado
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
Año de construcción: 1994
usado
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
Año de construcción: 1996
usado
Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site. ... más información
Año de construcción: 2007
usado
Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... más información
Año de construcción: 1995
usado
Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... más información
Año de construcción: 1985
usado
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... más información
Año de construcción: 2020
usado
Number of axes: 3, max. turning range: 350mm, turning length: 515mm, max. spindle speed: 8000/min, max. bar diameter: 34mm, spindle power: 11kW, control: M730UM with CELOS ERGOline Touch control panel for networking with CAD/CAM and MAPPS system, operating hours: 12,573h, including 3x external turning holder, 3x boring bar holder, 1x angular offset AGW, 1x axial AGW, 1x spindle insert tube, collet chuck for the main spindle, jaw chuck for the counter chucks, documentation, main and counter spindle with integrated motor spindle and increased speed, can be inspected on site.
usado
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... más información
Año de construcción: 1997
usado
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mmMAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mmX/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATI ...
Año de construcción: 2001
usado
Swing ober bed/ support: 400/ 245mm, Drehlänge: 1385mm, Spitzenweite: 2370mm, Steuerung: Fanuc Series 210i-T Anschlussleistung: 11kW, Länge: 3100mm, Breite: 1700mm, Höhe: 1600mm, Gewicht: 3,1t, mit Ersatzteilen. ... más información
Año de construcción: 2000
usado
CONTROLS CNC controls FANUC 18 T BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 700 mm turning diameter (max): 700 mmMAIN SPINDLE spindle revolutions (max): 3500 /min spindle bore diameter: 91 mm c-axis: yes COUNTER SPINDLE Z-axis travel: 1105 mmX/Z SLIDE X-axis travel: 362 mm tool fixture: Turret number of tool positions (total): 12 TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4820 mm space requirements -front/back-: 3200 mm total height: 2300 mm &n ...