tornos usadas para la venta

turning diameter:920 mmturning length:2034 mmx-axis:1025 mmy-axis:650 mmz-axis:2106 mmb-axis:240 °c-axis:360.000 x 0,001 °w-axis:2032 mmrapid traverse::40 m/minspindle turning speed range:1 - 1600 U/mintool taper:CAPTO C8work piece power:37 kWspeeds of tool:1 - 10000 U/minSpindle bore:170 mmtotal power requirement:125 kVAdimensions of the machine ca.:8,5 x 3,2 x 3,9 mweight of the machine ca.:26,5 tMachine with MAZAK Matric CNC control- 2 spindle boxes with C-axis and W-axis for right hand spindle- 2 power chucks 650 mm dia. Kitagawa- tool changer for 80 tools- Renishaw probe tester- hand operating panel- milling head with B- and Y axis- spindle changed in 10/21, last service in 12/23- coolant through spindle- splash housing, chip conveyor

turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system

faceplate diameter:1400 mmswing diameter:1600 mmturning height:1000 mmfaceplate turning speed range -stepless-:1 - 250 U/minmax. horizontal adjustment of cross-rail sup.:950 mmmax. adjustment of vertical turret slide:700 mmmax. vertical adjustment of side-support:1000 mmmax. horizontal adjustment of side-support:630 mmadjustment of cross-rail:660 mmadjustment speed of cross-rail:400 mm/minmax. workpiece weight:6300 kgfeed per revolution:0,025 - 10 mm/Upower capacity:56 kWweight of the machine ca.:21,5 tdimensions of the machine ca.:3 x 4,2 x 4,2 mwith 2-axes digital readout5-station turret headside headV-constant cutting speed

turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmcentre distance:2500 mmspindle turning speed range:22,5 - 1120 U/minspindle motor:15 kWfeeds - cross:0,018 - 1,25 mm/Uweight of the machine ca.:6,0 ttotal power requirement:19 kWdimensions of the machine ca.:4,0 x 1,4 x 1,6 mMachine equiped with:- Heidenhain digital readout- 2 steady rests- rapid traverse- 3-jaw chuck, faceplate- splash cover- Multifix rapid tool changing system

Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mmturning diameter over slide rest:345|480|680|880 mmturning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mmtravel of cross-slide cross:370|420|520|620 mmmovement of the upper support:200 mmbed width:600 (Monoblock) mmspindle bore:105mm (130 oder 155 opt.) mmspindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/minmetric threading:1~240 mmfeeds - longitudinal:0.1~24,3 mm/minfeeds - cross:0.05~12,5 mm/minrapid traverse longitudinal and cross:4000, 2000 mm/minturning tool - shaft cross cut:32 x 32 mmtailstock quill diameter:100 mmtailstock quill stroke:240 mmtaper in tailstock:6 MKmain drive motor:11 (15 kw opt.) kWmax. workpiece weight between centers:3000 kgWeight approx.:4t bei Spitzenw. 1000mm ( ...

:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mmswing diameter:1350|1600|2000|2500 mmturning height:1070|1350|1350|1700 mmmax. turning diameter:1150|1350|1800|2300 mmtable load:4|5|8|10 ttable rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/minmax. torque on the faceplate:10000|12500|18500|54000 NmTravel of Ram (vertical):800 | 900 | 900 | 1000 mmTravel of ram (horiz.):1350 | 1475 | 1650 | 2275 mmram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mmrapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kWMachine height: 5330 |5500 |5500|6600 mmmachine length:4600 |4700 |5050| 4950 mmmachine width:5500 |5800 |6300|7320 mmweight of the mac ...

:YS-VL-3000 faceplate diameter:3000 mmswing diameter:3500 mmturning height:1650 mmmax. turning diameter:3400 mmtable load:40 ttable rotation speed:2-40/41-120 U/minmax. torque on the faceplate:64500 NmTravel of Ram (vertical):1000 (1400 opt.) mmTravel of ram (horiz.):2775 mm ram head dimension:280x280 mmrapid power traverse in X-and Z direction:10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) tool taper:SK50/BT50 drive capacity - spindle motor:60/75 (75/100) kWMachine height:6700 mmmachine length:6100 mmmachine width:8700 mmweight of the machine ca.:69000 kgrepeating accuracy:0,005 mmhydraulic motor:3,75 kWservo motor X-axis:7 kwservo motor Z-axis:7 kwcoolant pump drive:2,2+1,1 kW:150 kvaCNC controller:Siemens/Fanuc/Fagor coolant system:700 Literautomatic tool changer:16-fach 4-jaw faceplate Ø:s. oben CNC controls from:Siemens/Fanuc/Fagor ATC:320 ...

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mmswing diameter:550|650|1000|1250 mmturning height:450|500|750/950|1000 mmspindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/minTravel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mmTravel of ram (horiz.):300|340|500|700 mmrapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/minTool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kWMachine height:2600|2910|4020|4605 mmweight of the machine ca.:4500|6000|13000|18000 kghydraulic motor:2,2 kWservo motor X-axis:1,6|1,6|4|7 kwservo motor Z-axis:3|3|7|7 kwcoolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW:35|40|50|70 kvaCNC controller:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fag ...

faceplate diameter:4000 mmswing diameter:5000 mmturning height:2500 mmmax. turning diameter:5000 mmtable load:40 ttable rotation speed:0,1-80 (2-stufig) U/minmax. torque on the faceplate:108000 NmTravel of Ram (vertical):1800 mmTravel of ram (horiz.):-2500~+2900 (aus Tischmitte) mmram head dimension:300x300 mmspindle speed:10-2500 (2-stufig) 1/minspindle taper:50 SKrapid power traverse in X-and Z direction:10/10 m/minfeed speeds:1-3000 mm/minCross rail travel :1680 mmTool changer:12-fach für rechten Stößel (für Drehwerkzeuge) Tool changer:60-fach für linken Stößel (für Fräswerkzeuge) tool taper:SK50/BT50 Machine height:s. Anlage mmmachine length:s. Anlage mmmachine width:s. Anlage mmdrive capacity - spindle motor:18,5/22 kWcoolant pump drive:3 kWservo motor X-axis:9 kwservo motor Z-axis:9 kwtable drive:100 kW:300 kvapositioning accuracy:0,01/500 mmrepeating accuracy:+/-0,008 mmC ...

faceplate diameter:5000 mmswing diameter:5200 mmturning height:3000 mmmax. turning diameter:5200 mmTravel of Ram (vertical):1500 mmTravel of ram (horiz.):+/- 2500 mmram stroke speed:15000 mm/mincutting capacity:150000 Nm in X-/Z-Achse ram head dimension:400 x 400 mmCNC controller:Siemens/Fanuc/Fagor Rams:2 Stk.Scales:v. Heidenhain servo motors:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor ATC:32/60/90 fachChip ConveyorCoolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication for Guide way4 Jaw Manual Chuck 1600mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake SystemOptions InstalledAir Conditioner For cabinetCoolant Through Spindle Filter for Coolant Water CE Mark Tran ...

turning diameter:670 mmturning length:3000 mmcontrol:840 z-axis:3150/3000 Z+ mmx-axis:700/260 X+ mmb-axis:-110/+90 °c-axis:0,001 °main drive motor:60/40 kWspindle turning speed range:2600/3300 U/minspindle diameter in front bearing:160 mmspindle bore:115 mmlower slide:2 x 12, VDI 40 upper slide:25 KWno. of tools in the magazine:90 Stückwotkpiece diameter with 2 vacant positions:200 mmtool length - max.:900 mmtool taper:HSK 100/ VDI 40 rapid traverse::15/20 m/minweight of the machine ca.:35 ttotal power requirement:140 kWdimensions of the machine ca.:13 x 4,5 x 3,6 mCNC Turninig-Boring-Milling Center with opposed spindles and 2 saddles- SIEMENS 840 C safety integrated control for 8 axis- Left/Right spindle with C-axis, KNCS 400 mm power chucks- Lower saddle with 2 x 12-fold revolving heads- Turning,- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000  ...

faceplate diameter:6000 mmswing diameter:6500 mmturning height:3000 mmslide stroke:2500 mmcross rail adjustment - vertical:1800 mmfaceplate turning speed range:0,40 - 78 U/minworkpiece weight max.:80.000 kgmain drive motor:150 kWtotal power requirement:180 kWweight of the machine ca.:160 tdimensions of the machine ca.:15 x 10 x 8,7 ü.F. mwith CNC NUM 1060hydrostatic guideways6000 mm power chuck C-axis driven tooling SK 50 / 30 KW / 6 - 2000 rpm.angular milling headautomatic toolchanger 50 pockets turning toolholders CAPTO C 6 / 47 Milling toolholders SK 50coolant attachment and chip conveyor

turning diameter:920 mmturning length:2034 mmcontrol:4 x-axis:1025 mmz-axis:2100 mmb-axis:240 °c-axis:360.000 x 0,001 °y-axis:650 mmw-axis:2000 mmspindle drive motor:35 kWspindle turning speed range:1 - 1600 U/minspindle bore:170 mmrapid traverse feeds:40000 mm/minwork piece power:37 kWtool taper:CAPTO C 8toolpiece turning speed range:1 - 10000 U/mintotal power requirement:125 kVAweight of the machine ca.:26,5 todimensions of the machine ca.:8,5 x 3,2 x 3,9 mMachine with MATRIX CNC control- Workpiecespindles with W and C-Axis- Milling unit with B and Y axis- 2 power chucks KITAGAWA 650 mm- tool changer for 80 tools- Renishaw probe tester- coolant through spindle- coolant device, chip conveyor

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmspindle speeds::22,5 - 1120 centre distance:2500 mmfeeds - cross:0,018 - 1,25 mm/Uspindle motor:15 kWtotal power requirement:18 kWweight of the machine ca.:6,0 tdimensions of the machine ca.:3,6 x 1,4 x 1,7 m- Heidenhain digital readout- rapid traverse- Multifix quick tool change with inserts- faceplate- 2 steaday rests, 3-jaw chuck- splash protection

Modell:5-800 | 5-1000 | 5-1200 | 5-1400 turning diameter over bed:800|1000|1200|1400 mmturning diameter over slide rest:510|710|910|1110 mmturning length:3000~12000 mmDistance between centres:3000~12000 mmcentre height:500 mmbed width:900 (opt. 1200) mmspindle bore:155 (A2-11) mmspindle turning speed range:6-800 U/minspindle speed steps:variabel innerhalb der Stufe, 4 Stücktailstock quill taper MT:6 MKdiameter of quill:165 mmquill travel:250 mmspace requirements approx. LxWxH:10.800x2.200x1925 (8m Spitzenweite) mmmachine weight:18200 (8m Spitzenweite) kgspindle drive:30 kWtool holder:manuell schwenkbarer 4-Fach Stahlhalter für Stahlhalterquerschnitte 32x32mm thread chasing dial:keine fixed steady:feststehende Lünette, Durchmesser 60 bis 290mm

turning diameter over bed:400 mmturning diameter over slide rest:250 mmturning length:1000 mmmax swing over gap:520 mmHeight of centres:200 mmcrossed path:230 mmbed width:218 mmmain spindle bore:52 mmspindle size:MK 6 speeds::55-2000 U/minturning angle of tool post:90 gradtail stock:50 mmtaper in tailstock:MK 4 threading metric:0,4-7 mmthreading WHITWORTH:4-60 TPI total power requirement:2,2 kWdimensions of the machine ca.:1940 x 820 x 1545 mmweight of the machine ca.:750 kgtailstock quill:110 mmtapping modul:0,4-3 mmtapping diametral:8-84 Gang/Zoll

:SDM-1460 | SDM-1660 | SDM-1860 | SDM-2060 turning diameter over bed:1460 | 1660 | 1860 | 2060 mmturning diameter over slide rest:960 | 1160 | 1360 | 1560 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmbed width:1180 mmworkpiece weight:20 tspindle bore:105 mmspindle taper:140 spindle speed:3-200 1/min, 4 stufig metrical thread cutting:1~60 mmlongitudinal feeds:0.1~6 mm/Uface feeds:0.05~3 mm/Urapid traverse longitudinal:3400 mm/minrapid traverse cross:1700 mm/mincross way of carriage:750 | 850 | 950 | 1050 mmmovement of the upper support:280 mmtool size:45 x 45 mmtailstock quill diameter:280 mmstroke:300 mmtailstock-quill conus:100; 1:7 metrischspindle motor:55 kWtool holder:4-fach steady diameter:250-600 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lathe

Modell:SDM 850 Varia | SDM 1000 Varia turning diameter over bed:850|1000 mmturning diameter over slide rest:520|720 mmcentre distance:2000/3000/4000/5000/6000 mm:1150|1350 mm:350 mmtravel of cross-slide cross:600 mmmovement of the upper support:250 mmbed width:600 (Monoblock) mmspindle bore:100 mmspindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/mintool holder -shaft diameter:45 mm:90° feeds - longitudinal:0,08~9,6 mm/minfeeds - cross:0,04~4,8 mm/minrapid traverse longitudinal and cross:3640/1800 mm/min:900 mm/minmetric threading:56, 1~120 mmtailstock quill diameter:120 mmtailstock quill stroke:250 mmtaper in tailstock:6 MKmain drive motor:15|18,5 kW:16,8|20,3 Kvamax. workpiece weight between centers:4000 kgWeight approx.:7200 kgmachine width/height:1600x1600 mmmachine length:6150 mm (4000 mmSpitzenweite) 4-jaw independent chuck:800 mm3-Axis DRO:SI ...

control:SIEMENS SINUMERIK 840 C WORKING RANGE TURNING:. - swing diameter (max):300 mmMAIN SPINDLE:. - spindle revolutions (min):28 /min - spindle revolutions (max):7000 /min - torque (max.):188 NmX/Z SLIDE:. - x-axis traverse:920 mm - traverse velocity z (min):0 mm/min - traverse velocity z (max):24000 mm/min - traverse velocity x (min):0 mm/min - traverse velocity x (max):40000 mm/min - cutting force:8 kNX SLIDE:. - traverse velocity x (min):0 mm/min - traverse velocity x (max):40000 mm/min - rapid traverse x:40000 mm/minELECTRICAL SPECIFICATIONS:. - mains power supply:54 kVA - mains voltage:400 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - total height:2900 mm - total weight approx.:6500 kgTechnical description :Vertical self loading CNC lathe