subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...
TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...
ZMM C11MB conventional lathe, manufactured in Bulgaria, is used for machining workpieces with a maximum length of 1000 mm and a diameter of 460 mm (turning above bed) or 350 mm (turning above support). The offered C-11MB x 1000 mm universal lathe of indestructible design has been equipped with a 7.5 kW main motor and a high-speed spindle to provide the user with maximum productivity and reliability for many years. Technical data of the ZMM C11MB metal lathe - maximum workpiece diameter (turning above bed): 460 mm - maximum workpiece diameter (turning over support): 350 mm - maximum workpiece length at the tusk: 1000 mm - maximum spindle speed: 2000 rpm - minimum spindle speed: 16 rpm - number of spindle speeds: 18 - spindle passage: 65 mm - motor power of ZMM C-11MB lathe: 7.5 kW
FMB TURBO 3-26/2100 bar feeder was manufactured in Germany. The compact machine is used to automatically feed bars with a maximum diameter of 26 mm into sliding headstock lathes. Operating on the two-stage feed principle, the machine features an inwardly swivelling pusher that provides significantly increased bar change efficiency Technical specifications of the bar feeder FMB TURBO 3-26/2100 - maximum bar length: 2100 mm - maximum bar diameter: 26 mm - minimum bar diameter: 3 mm
PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...
COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg
MANURHIN KMX SWING 720 CNC lathe was built in 2004 in France. The automatic lathe is used for precision machining of workpieces with a maximum length of 2500 mm and a diameter of 20 mm, in ten axes. The high quality of the workmanship, high turning precision and reliability of the turning centre, will satisfy even the most demanding customers. The KMX SWING 720 swiss type lathe guarantees the possibility of performing a wide range of metal machining, thanks to the use of a main spindle together with a sub spindle rotating at a maximum speed of 10000 rpm. The machining tools are stored in a magazine with a capacity of up to 14 pieces and they are changed in a very short time. The lathe is equipped with a Fanuc Series 160i-T CNC controller for full control of the machine and a Hydrobar Express 226 LNS bar feeder. The total weight of the machine is 4300 kg. Technical parameters of ...
Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration
Quick-change tool holder PARAT model RD-2 base 106 x 106 mm 9 Inserts 2 keys for turret 1 tool clamping key ... más información
1 fixed setting stick with roller quills 1 moving setting stick ... más información
Inv. Num. : 7587 Type: GLS 150 Producer: Goodway Created: 2013 Parameters: Control system: Fanuc Maximum turning length: 500 mm Maximum turning diameter over bed: 310 mm Maximum length of travel in the X-axis: 180 mm Maximum feed in the Z-axis: 520 mm Weight: 3200 kg ... más información
3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms ... más información
MSX-850 Controller Max. turning diameter: 386 mm Max. bar passage: 52 mm Travel X/Y/Z/B: 260/100/590/624 mm Main spindle max. speed: 6,000 rpm Sub-spindle max. speed: 6,000 rpm Beghs3a 12-speed tool turret 12 driven stations 5.5 kW, max. speed: 6,000 rpm Automatic Parts Catcher Conveyor ... más información
Mazatrol PC Fusion 640 T Travel X/Y/Z/B: 180/100/575/585 mm max. turning diameter 300 mm Bar passage 51 mm Main spindle 18.5 kW, max. 5,000 rpm Spindle nose A2-6 Sub-spindle 7.5 kW, max. 5,000 rpm Bcpr3pc7jma 16-speed turret, all stations for driven tools Max. speed: 4,500 rpm Tooleye Parts catcher Interface for bar feeder LNS Quick Load Servo III Bar Feeder Conveyor Streamware High Pressure Pump, 20 bar Coolant Temperature Control, Parker Hiross Hyperchill ICE005/230/1/5 Oil mist extraction Hainbuch Collet chuck for main and sub-spindle Tool Holder Package
Year of construction 12-2022 Mazatrol Smooth EZ Max. turning diameter: 340 mm Max. swing diameter: 695 mm Distance between clamping jaws: 575 mm Max. bar passage: 65 mm Travel X/Z: 215/605 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Main spindle spindle nose A2-5 12-speed tool turret 12 driven tool stations, 5.5 kW Max. speed driven tools 4,500 rpm Overload Monitoring Mayfran Chip Conveyor, Right Discharge Dmjg8r Automation package - Tooleye - Preparation of chip conveyors - Robot interface (ADVANCE/ETHERNET/IP) - Spindle orientation in a fixed position - Air blowing device on the chuck, main spindle - 15 bar high-pressure cooling system -Signal lamp - C-axis counter pindle 0.0001° - 8" Power Chuck, Kitagawa BR08 & Cyl. SR1566C Machine is as good as new. Machine has never produced.
Mazatrol 640 T Nexus Control max. turning diameter 420 mm Max. turning length 1,500 mm Max. bar passage 102 mm Spindle motor 30 kW Max. spindle speed 3,300 rpm C-axis 12-fold revolver, all stations for applied Tools Requested. Tools 7.5 kW, max. speed 4,000 rpm Tailstock Tooleye Conveyor 3-jaw chuck, Kitagawa B212 Tool holder package
Mazatrol SMART Control Max. rotary diameter: 420 mm Max. turning length: 1,233 mm Travel X/Z: 240/1,350 mm Spindle motor 30 kW Max. spindle speed: 3,300 rpm Max. bar passage: 102 mm 12-speed revolver Driven tools AC 7.5 kW Max. speed: 4,000 rpm 3-jaw chuck Kitagawa BR12 Bezel SMW Autoblok type K3-FSW, clamping range 65 – 235 mm Djgned 15 bar high pressure pump