Fabricante:
(Categoría: 103)
Description: serial number: 53183 control: PHILIPS ,432 working hours: approx. 54064 hrs.  , travels: X-axis: 500 mm Y-axis: 400 mm Z-axis: 350 mm quill stroke: 50 mm feed ,rate: 1 - 4000 mm/min. turning speed range rpm: 20 – 5000 rpm rapid traverse: X-axis: 6m/min. Y-axis: 5 m/min. Z-axis: 6 m/min table dimensions: 350 x 660 mm tool taper: ISO40/DIN 69871 total power requirement: 10 kW milling table swivable: table rotation on B axis - table tilt by -30° to +30°  , attention: main drive non functional! z-motion: 350 mm, Read off operating hours: 54,064 h, x-motion: 500 mm, y-motion: 400 mm, control: PHILIPS 432, table surface area l x w : 350 x 660 mm, tool taper: ISO40/DIN 69871, turning speed range: 20 – 5000 rpm, feed range: 1 - 4000 mm/min, rapid motion: 5 - 6 m/min, weight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,200 x 1, ...
z-motion: 850 mm, x-motion: 3,000 mm, Distance spindle - table max.: 840 mm, Drive power milling head: 22 kW, Accessories included: No, Coolant type: cooling lubricant, NC rotary table: No, y-motion: 800 mm, control: Heidenhain TNC 407, table surface area l x w : 3000 x 800 mm, tool taper: ISO 50, turning speed range: 9 - 2000 rpm, feed range: 3,000 mm/min, rapid motion: 8 m/min, weight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 7,770 x 3,500 x 2,870 mm
Description: serial number: 29660 control: SIEMENS Sinumerik 840D  , travels: X-axis: 160 mm Y-axis: 220 mm Z-axis: 350 mm max. tool diameter: 130 mm milling head swivel angle (A-axis): +/- 45°  , workpiece table: outer diameter: 200 mm clamping diameter: 150 mm bore: 45 mm max. table speed: 1000 rpm  , milling head: , drive power: 11.5 kW max. module: 3 mm max. milling cutter speed: 4000 rpm max. head circle diameter of the milling cutter: 100 mm max. cutter length: 317 mm max. cutter length (toothed): 240 mm  , rapid traverse: X-axis: 20 m/min. Y-axis: 10 m/min. Z-axis: 7 m/min.  , connected load: 40 kVA  , including: ASTOS DML200/1576/1340 Chip Conveyor, YOM: 2006, weight: 150 kg RELEN UC Compact 1 Extraction Filter, YOM: 2006, power: 0.57 kW, rotational speed: 2750 rpm, air supply 1200 m3/h  , without tool cabinet and conveyor sys ...
x-travel:710 mmy-travel:520 mmz-travel:520 mmweight of the machine ca.:ca. 12 tmilling head speed:20-12000 U/mintool taper:SK 40 milling spindle drive:36 kWCNC 5-axis simultaneous machining center universal - 2 pcs. NC rotary tables with swivel axis -Clamping surface of rotary axis (rotary axis): Ø 700 mm x 500 mm - max. load (central): 350 kg
x-travel:500 mmy-travel:350 mmz-travel:400 mmfeed:10~500 (18) mm/minrapid traverse x + z axis:1200 mm/min:1200 mm/min.table surface area:800x400 horiz. mmtable surface area:250x950 verti. mmtable load capacity:400 kgt-slots (width x number x distance):8x14x45 main drive:3 kWweight of the machine ca.:ca. 2300 kgdimensions of the machine ca.:1820x1640x1710 mmWarranty: 12 months warranty material BRAND NEW CONVENTIONAL TYPE MILLING MACHINE >Standard accessories of milling machine:- 3-axis digital display with manifold functionalities- Vertical milling head swivel plus and minus 90 degrees, swiveling with down feed, for horizontal milling backwards- Collet chuck with collets O 4,5,6,8,10,12,14,16 mm- Short tool shank 22, 27 mm- Reduction sleeve MK1, MK2, MK3, MK4- Chuck O 0-6 mm, 1-13 mm O- Chip pan- Arbor O 22, 27 mm- Draw bar- Anchor bolts- Coolant system- Support for hori ...
Including ISO holder with plate, now with Mas Bt50, 40 tools, hydro unit with cooler, high pressure and low pressure water with new exchanger arm, bearings replaced 2.5 years ago, including discharge belt, worm gears removal residual material up to 6000 rpm. Lot must be professionally dismantled. Lot is connected to water/electricity/gas, pipe and/or cabling must be capped. Damage and/or negligence to the property will be recovered from the buyer. We advise you to bring your own materials. No tap available. Viewing day for this lot is by appointment. Please send an email to: info@petervanderleegte.nl
For the environmentally friendly removal of paint and varnish from smooth wooden surfaces such as stairs, doors and windows. Suitable for working with untreated wood. Due to lateral blades, it is suitable for processing rebates. Infinitely variable adjustment of the milling depth. Die-cast aluminium gear housing for optimal heat dissipation and long service life. Reversible HM chisels usable on four sides for a long tool life. Extraction option by connecting an all-purpose vacuum cleaner. • Milling cutter diameter 80mm • Axial milling depth 0-0.3mm • Radial milling depth 0.15mm
x-travel:600 mmy-travel:500 mmz-travel:450 mmturning speeds:5 - 5000 U/minquill stroke:90 mmtotal power requirement:9 kWfeed range:0-10.000 mm/minweight of the machine ca.:3260 kgdimensions of the machine ca.:2200x2800x2000 mmspindle:6 kWvertical milling head:SK 40 automatic tool changer:22 Pos.CNC universal milling machine with toolchanger,Equipped with CNC-Heidenhain TNC 407el.handwheelcoolant device
x-travel:850 mmy-travel:500 mmz-travel:610 mmrotary table::400 mmspindle turning speed range:12.000 1/mindrive capacity - spindle motor:17/10 kWcontrol:HEIDENHAIN iTNC 530 Tool changer:40- fach spindle taper ISO:SK 40 weight of the machine ca.:7,7 ttotal power requirement:28,5 kWdimensions of the machine ca.:3 x 2.70 x 3,2 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 400mm,3D infrared touchprobe,el. handwheel,chipconveyor,airblast through spindle,internal coolant supply 40bar,flushgun,direct measuring system,approx. 38.000h "machine on", approx. 14.500h "spindle on"
x-travel:2000 mmy-travel:1000 mmz-travel:1050 mmtable clamping surface::2.400 x 1.000 mmcontrol:HEIDENHAIN TNC 426 CB turning speeds:20 - 5000 1/mintool taper:SK 50 spindle:22 kWtotal power requirement:50 kVAweight of the machine ca.:10 tdimensions of the machine ca.:5 x 3 x 3 mCNC universal bed milling machine,direct measuring system,coolant device,coverchip conveyerhead is swivelling automaticaly horizontal / verticalhead is swivelling semiautomaticaly 2,5 degrees over inchinghead is swivelling manually on the 5 th axis with display on screenapprox. 59.250 h hours "machine on", approx. 9.656 h hours "programm on"
x-travel:600 mmy-travel:400 mmz-travel:400 mmnumber of spindle speeds:63 - 3.150 1/minfeed stepless:12-3000 / 6-1500 (Z) mm/minquill stroke:100 mmmilling-head swivable +/-:90° spindle taper ISO:SK 40 surface area:630 x 400 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2 x 1,9 x 1,95 muniversal milling machine with point to point control,mechanical handwheels,swivel - rotary table (mech.) +-45°,hydr. tool clamping,half cabin,coolant device,manuals (German language)
x-travel:2.500 mmy-travel:1.000 mmz-travel:1.250 mmtable surface area:2.700 x 900 mmcontrol:TNC 430 HEIDENHAIN turning speeds:4.500 1/mintool taper:SK 50 spindle drive:20 kWtable load:8 tweight of the machine ca.:16,5 tCNC milling machine,millling head swivelable in 2 layers 1°/2,5°,chip conveyor,no toolchanger
x-travel:3000 mmy-travel:1000 mmz-travel:1500 mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:3100x1050 mmmax. table load:8000 kgspindle taper:50 SKspindle speeds:3500 1/min.spindle motor:15/18,5 kWfeed:1~8000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:18 tdimensions of the machine ca.:7670x4325 (LxT) mmuniversal milling head:2,5° auto automatic tool changer:24-fach LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung cnc control:HEIDENHAIN 640i TNC chip conveyor:Schneckenausführung vorne/hinten TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAG ...
Weight: approx 2 t. dimensios: 1 x 1 x 1,5m ... más información
This RÃDERS 600 RFM-2 Vertical Machining center was manufactured in the year 2004 in Germany. ... más información
x-travel:1250 mmy-travel:470 mmz-travel:540 mmspindle speed:40,55,80,115,160,225,315,440,620,880,1240,1750 U/min (12 Stufen) spindle taper:50 NT/BT/SKtable load:1000 kgtable-size:400x1800 mmT-slot (width-distance-quantity):18x4x80 mmdistance spindle nose and table:50-520 mm (vertikal) distance spindle center to table:50-520 mm (mit Halter), 360-790 mm (ohne Halter) feeds:X/Y/Z:16-1200/16-1200/8-450 mm/minrapid travel x/y/z:2000/2000/700 mm/mindistance spindle center to column:500 mmspindle drive:5,5 kWweight of the machine ca.:3,2 tdimensions of the machine ca.:3000/2535/1830 mmCNC controls from:Siemens/Fanuc/Fagor/Heidenhain
This Röders RFM 760/2 Universal Machining Center was manufactured in the year 2004 in Germany. It is equipped with a Röders RMS 6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm. ... más información
x-travel:1000 mmy-travel:430 mmz-travel:540 mmspindle speed:40,55,80,115,160,225,315,440,620,880,1240,1750 U/min (12 Stufen) spindle taper:50 NT/BT/SKdistance spindle center to column:500 mmtable-size:1500x360 mmtable load:800 kgT-slot (width-distance-quantity):18x4x80 mmdistance spindle nose and table:90-520 mm (vertikal) distance spindle center to table:90-520 mm (mit Halter), 400-800 mm (ohne Halter) feeds:X/Y/Z:16-1200/16-1200/8-450 mm/minrapid travel x/y/z:2000/2000/700 mm/minspindle drive:5,5 kWweight of the machine ca.:2,9 tdimensions of the machine ca.:2050x2535x1800 mmCNC controls from:Siemens/Fanuc/Fagor/Heidenhain