Fabricante:
(Categoría: 103)
x-travel:2000 mmy-travel:800 mmz-travel:800 mmtable-size:2.000 x 700 mmworkpiece weight:3500 kgdrive capacity - spindle motor:17 kWspindle cone:50 ISOspindle turning speed range:3000 U/mindimensions of the machine ca.:5265 x 3250 x 2730 mweight of the machine ca.:9 tCNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the guide ways of the ram.- Repairing o ...
X-travel: 710mm, y-travel: 600mm, z-travel: 500mm, rapid traverse: 6000mm/min, max. rotational speed: 6300/min, tool holder: SK 40, table dimensions: 550x1000mm, NC rotary table diameter: 630mm, controls: Dialog 4. ... más información
X-travel: 1000mm, y-travel: 350mm, z-travel: 400mm, digital measuring system has been retrofitted, is no longer fully functional. ... más información
x-travel:2500 mmy-travel:800 mmz-travel:800 mmtable-size:2.500 x 700 mmworkpiece weight:4000 kgdrive capacity - spindle motor:22 kWspindle cone:50 ISOspindle turning speed range:20 - 3000 U/mindimensions of the machine ca.: 7800 x 3315 x 2730 mweight of the machine ca.:11 tCNC controller: Heidenhain TNC 426 :Auto-indexing UDG (2.5º) :HR-410 used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the g ...
Connected load: 76kW, controls: HEIDENHAIN, without tool changer. ... más información
Table dimensions: 500x200mm, connected load: 1.5kW, length: 1110mm, width: 1170mm, height: 1650mm, weight: 770kg, with documentation, without accessories. ... más información
x-travel: 500 mmy-travel: 400 mmz-travel: 320 mmturning speeds: 40 - 2000 U/minspindle taper: 40 SKquill stroke: 50 mmtable load: kg.table:: 700 x 300 mmtotal power requirement: 4,5 kWweight: 1,3 kgdimensions of the machine ca.: 1,5 x 1,2 x 1,95 mmFurnishing:- 3-axis digital display- Rapid traverse- Coolant system- Good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle rotational speed: 100-1300/min, without documentation or accessories. ... más información
Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. ... más información
Max. rotational speed: 2000/min, with instruction manual. ... más información
Rapid traverse: 3000mm/min, connected load: 12.5kVA, length: 2300mm, width: 2500mm, weight: 1.83t, the display is defective and the z-axis needs overhauling. ... más información
X-travel: 500mm, y-travel: 500mm, z-travel: 400mm, table dimensions: 460x800mm, rotational speed: 31.5-3150/min, controls: HEIDENHAIN TNC 155, length: 2900mm, width: 2700mm, height: 2000mm, weight: 2.3t. ... más información
X-travel: 300mm, y-travel: 150mm, z-travel: 250mm, U-travel: 1500mm, V-travel: 1060mm, W-travel: 900mm, table dimensions: 1000x32000mm, max. load: 4t, rotational speed: 40-4000/min, weight: 20t, including documentation, spindle cabinet and spindle. ... más información
X-travel: 800mm, y-travel: 450mm, z-travel: 500mm, quill stroke: 80mm, rotational speed: 63-3150/min, length: 4500mm, width: 3800mm, height: 2030mm, weight: 3.8t, operational hours counter: 2538h, including accessories and documentation, was maintained regularly. ... más información
X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, feed rate: 2-3600/min, rapid traverse: 4000mm/min, including documentation, without spare parts, gear for speed under 500/min is defective and the milling spindle is losing oil. ... más información
x-travel:710 mmy-travel:520 mmz-travel:520 mmweight of the machine ca.:ca. 12 tmilling head speed:20-12000 U/mintool taper:SK 40 milling spindle drive:36 kWCNC 5-axis simultaneous machining center universal - 2 pcs. NC rotary tables with swivel axis -Clamping surface of rotary axis (rotary axis): Ø 700 mm x 500 mm - max. load (central): 350 kg
Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. ... más información