fresadoras usadas para la venta

x-travel:850 mmy-travel:500 mmz-travel:610 mmrotary table::400 mmspindle turning speed range:12.000 1/mindrive capacity - spindle motor:17/10 kWcontrol:HEIDENHAIN iTNC 530 Tool changer:40- fach spindle taper ISO:SK 40 weight of the machine ca.:7,7 ttotal power requirement:28,5 kWdimensions of the machine ca.:3 x 2.70 x 3,2 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 400mm,3D infrared touchprobe,el. handwheel,chipconveyor,airblast through spindle,internal coolant supply 40bar,flushgun,direct measuring system,approx. 38.000h "machine on", approx. 14.500h "spindle on"

x-travel:2000 mmy-travel:1000 mmz-travel:1050 mmtable clamping surface::2.400 x 1.000 mmcontrol:HEIDENHAIN TNC 426 CB turning speeds:20 - 5000 1/mintool taper:SK 50 spindle:22 kWtotal power requirement:50 kVAweight of the machine ca.:10 tdimensions of the machine ca.:5 x 3 x 3 mCNC universal bed milling machine,direct measuring system,coolant device,coverchip conveyerhead is swivelling automaticaly horizontal / verticalhead is swivelling semiautomaticaly 2,5 degrees over inchinghead is swivelling manually on the 5 th axis with display on screenapprox. 59.250 h hours "machine on", approx. 9.656 h hours "programm on"

x-travel:600 mmy-travel:400 mmz-travel:400 mmnumber of spindle speeds:63 - 3.150 1/minfeed stepless:12-3000 / 6-1500 (Z) mm/minquill stroke:100 mmmilling-head swivable +/-:90° spindle taper ISO:SK 40 surface area:630 x 400 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2 x 1,9 x 1,95 muniversal milling machine with point to point control,mechanical handwheels,swivel - rotary table (mech.) +-45°,hydr. tool clamping,half cabin,coolant device,manuals (German language)

stroke: 110mm; Unloading: 250mm ... más información

Equipped with pneumatic clamping and foot control ... más información

x-travel:2.500 mmy-travel:1.000 mmz-travel:1.250 mmtable surface area:2.700 x 900 mmcontrol:TNC 430 HEIDENHAIN turning speeds:4.500 1/mintool taper:SK 50 spindle drive:20 kWtable load:8 tweight of the machine ca.:16,5 tCNC milling machine,millling head swivelable in 2 layers 1°/2,5°,chip conveyor,no toolchanger

Year of production: 1986 Serial number: 50 166 N and the machine was overhauled in 2003 with modernization of electrical control. The machine was equipped with a new SIEMENS automatic controller and new SIEMENS drives. GENERAL CHARACTERISTICS OF THE MACHINE The basic feature of the machine is a fixed portal, a sliding table. The portal has a height-adjustable crossbar, which is equipped with one or two vertical headstocks in the VFS 160 design. Furthermore, the portal is equipped with one or two side (horizontal) VFS 160 headstocks. These types of headstocks can be fitted with additional spindle heads, up to 4 pieces available. The clamping surface of the machine consists of two connected clamping tables, which after disconnection can be used individually (only one is always functional). Clamping table Dimensions of 1 table 2 2,000 x 4,000 mm Total length of connect ...

Axis travel x = 3500 mm y = 1500 mm z = 1000 mm With positioner ... más información

Sell installation for plasma cutting with CNC UPMR-3015, brand FMGroup: -size of the working field 30001500 mm (water bath) -PC based CNC rack with MASN 3 software -source Hyperterm 105A -date of release May 2020. ... más información

FSQ 80 (100) O / A3 CNC - TOS KUŘIM Table milling machine, table length 3m System: Heidenhain / optional Availability: according to the selected repair Warranty: according to the selected repair FSQ 80 (100) O / A3 CNC - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 7,760 mm Overall width: 4,360 mm Overall height: 3,400 mm Total weight: 18,000 kg Total power consumption: 40 kVA Working range: X-axis longitudinal stroke 3,000 mm Transverse stroke of the Y axis 1,000 mm Vertical stroke Z axis 900 mm Spindle head (head O): Max. performance 22 kW Speed range 11 - 2,500 rpm Number of speed steps smoothly H-V machining, 2.5o rotation X - Y / Z feed range: Number of degrees / range continuously / 1 - 5,000 mm.min-1 Y - Z / X rapid traverse 10,000 / 15,000mm.min-1 Table : Table area 800 x 3,000 mm Max.  ...

Numerically controlled gantry milling machine PORĘBA FBA125 X3M with SINUMERIC 820S control. Type FBA 125 X3M Built in 1997 Distance between columns 1500 mm Working table dimensions: 3000x1000mm Max. Distance from the work table to the spindle 1250 mm X axis travel 3000 mm Headstock travel along the axle beam 1750 mm Travel of the headstock in Z axis 1000 mm Table load 12,000 kg Spindle (2 speed ranges) 2000 rpm, 30 kW, SK50 Manual tool change Currently, the machine is excluded from the production process.

FCQV 63 B CNC - TOS KUŘIM Table milling machine System: TNC 407 Warranty: 6 months Availability: 2 weeks from order We have the machine in stock FCQV 63 CNC B - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 5,900 mm Overall width: 3,600 mm Overall height: 3,400 mm Gross weight: 15,500 kg Number of places in the tool magazine: 40 pcs Total power consumption: 65 kVA Working range: X-axis longitudinal stroke 1,500 mm Transverse stroke of the Y axis 630 mm Vertical stroke Z axis 630 mm Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range continuously / 20 - 3,500 n / min Ex. spindle motor 27.4 kW Max. twisting mom. on the spindle. 1,000 Nm X - Y / Z feed range: Number of degrees / range continuously / 1 - 2,000 mm / min Rapid traverse 15,000 -15,000 / 10,000 mm / min  ...

ZEMAN corrugator production line Line for the production of corrugator ZEMAN VEB 1500x16000-T, production in Austria, working, taken out of service. year of production 2006. cost is negotiable. ... más información

Clamping surface of the table: 1000x7000 mm Longitudinal movement of the table - x-axis: 5000 mm Transverse movement of the table - z axis: 2000 mm Vertical table movement - y axis: 1250 mm Spindle taper: ISO 50 Spindle diameter in front bearing: : 100 mm Number of table T-slots / spacing: : 7/140 -/mm Maximum torque: : 1200Nm

Universal metal milling machine with Newall 3-axis digital readout, -Drill pinole (stroke 80 mm). -Support for collecting the vertical head when milling horizontally. -Ram with support frame and horizontal long shafts. -Vertical head adjustable by degrees. -8 Feed rates on all axes. -Stop cams for automatic shut-off. -lighting, chip collector. -Size table: approx. 800 x 300 mm, 14 mm t-slots. -Incl various clamping tools and wrenches. -Manual/description. Unused machine

CNC drilling and milling machine with an indexed rotary table, stepless change of spindle speed, retractable spindle quill. In 2006 the machine tool underwent an electronic modernization - the control was replaced with a new PRONUM control. Machine tool, with manual tool change. Rotary table indexed every 90 ° with hydraulic lock. Type WFM-100N Built in 1978 PRONUM 640FC control Working table dimensions 1100x1100 mm Working table travels 1200x900 mm Headstock travel 1000 mm Spindle quill stroke 600 mm Pinola diameter of the spindle ø100 mm Min distance of the spindle axis to the work table 50 mm Table load / rotary table 3000 kg ISO 50 spindle, 18.5 kW, 1600 rpm Currently, the machine tool is used in the production department.

FGS 50/63 - TOS KUŘIM Cantilever milling machine Horizontal / vertical axis milling New electrical switchboard + Print. panel Digital measuring of axes Overhaul 2021 Warranty: 12 months Availability: 3 weeks from order STATE OF THE MACHINE IN GEOMETRIC ACCURACY BY MANUFACTURER FGS 50/63 - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500kg Total power consumption: 23 kVA Working range: X-axis longitudinal stroke 1,400 mm Transverse stroke of the Y axis 630 mm Vertical stroke Z axis 500 mm Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range 18 / 35.5 - 1,800 n / min Ex. spindle motor 15 kW Max. twisting mom. on the spindle. 2,500 Nm X - Y / Z feed range: Number of degrees / range 16/10 - 1 800 / 2.5  ...

x-travel:3000 mmy-travel:1000 mmz-travel:1500 mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:3100x1050 mmmax. table load:8000 kgspindle taper:50 SKspindle speeds:3500 1/min.spindle motor:15/18,5 kWfeed:1~8000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:18 tdimensions of the machine ca.:7670x4325 (LxT) mmuniversal milling head:2,5° auto automatic tool changer:24-fach LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung cnc control:HEIDENHAIN 640i TNC chip conveyor:Schneckenausführung vorne/hinten TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAG ...

Year of production / SO / GO: 1987 / - / 1997 Technical parameters of the machine: Maximum torque on the spindle - 1000 NMMaximum feed force in the X, Y, Z axes - 25,000 NMMaximum workpiece weight - 2,000 kgTotal table area (with grooves) - 630 x 2200 mmNumber of table T-slots - 5Width and T-pitch Table grooves - 22 x 100 mmTable height from base - 900 mmLongitudinal table stroke X - 1,500 mmTransverse table stroke Y - 630 mmVertical headstock stroke Z - 630 mmSpindle taper - ISO 50Spindle diameter in front bearing 110 mmSpindle face distance from table clamping surface - 150 -780 mmSpindle motor - regulatingMotor power S119.3 kW, S327.4 kWSpindle speed range - 20-3 500 n.min-1Reed range 1-5 000 mm.min-1Speed ​​feed in X, Y axes - 15 m.min-1Speed ​​feed in Z axes - 10 m.min-1Total length - 5 900 mmTotal width - 3 400 + 3 600 mmTotal height - 3 400 mm.

Table dimensions X 2000mm Y 1000mm Z 1000mm, Heidenhain 426 control system, machining head type K (smooth machining in five axes), year of manufacture 1998. The machine is in operation and can be tested. ... más información