Fabricante:
(Categoría: 103)
x-travel:560 mmy-travel:500 mmz-travel:450 mmtotal power requirement:16,5 kVAweight of the machine ca.:2700 kgdimensions of the machine ca.:2,30 x 3,0 x 1,90 mcontrol:Grundig quill stroke:80 mmtool taper:SK 40 spindle speeds::40..4000 1/minfeed:2 .3600 mm/minrapid traverse:4000 mm/minDocuments:vorhanden
Control: Heidenhain TNC 186, length: 2600mm, width: 3000mm, height: 1900mm, weight: 2.4t, with documentation, and SK40 mountings, the machine is electrically and control-technically not ready for use, mechanically the machine is in order, maintenance was carried out regularly, an inspection on site is possible.
x-travel:1120 mmy-travel:345 mmz-travel:400 mmtotal power requirement:14,5 kWweight of the machine ca.:3,85 tdimensions of the machine ca.:3.500 x 2.920 x 2.710 mmtable-size:1600 x 400 mmspindle taper:SK 50 ... más información
X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h. ... más información
total power requirement:2,4 kWweight of the machine ca.:1150 kgdimensions of the machine ca.:1550 x 1615 x 1630 mmtable clamping surface LxW:315 x 710 mmmax. tool weight:200 kgT - slots distance:63 mmT - slots - width:12 mmtaper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/minfeed speeds:11,2 -355 mm/minDocuments:vorhanden
Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible. ... más información
x-travel:600 mmy-travel:400 mmz-travel:380 mmtotal power requirement:6 kWweight of the machine ca.:1700 tdimensions of the machine ca.:1800 x 2130 x 1980 mmTable dimensions:400 x 800 mmT-slots:7 St.,14 x50 table load:300 kgspindle:SK40 turning speed range:63-250 U/minspeed steps work spindle:18 spindle speeds::50- 2500 n/minfeeds:10-500 mn/minDocuments:vorhanden
Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible. ... más información
Travel X/Y/Z: 800mm/690mm/630mm, max. spindle speed: 15000 rpm, drilling capacity: 30mm. Table size X/Y: 630mm/630mm, max. workpiece weight: 1100kg, control: Siemens Sinumerik. Dimensions X/Y/Z: 6000mm/2900mm/2400mm, weight: approx. 25000kg. Spare parts available. Including chip conveyor and separate coolant system.
Traversal X/Y/Z: 365mm/185mm/360mm, Speed range: Various speeds depending on the gear stage: BC - 115/230 rpm, AC - 290/580 rpm, BD - 360/720 rpm, AD - 875/1750 rpm, measuring system: SINO SDS2MS, spindle orientation: horizontal/vertical. Control panel: Features stop, emergency stop and direction control. On-site inspection is possible.
Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo. ... más información
x-travel:500 mmy-travel:400 mmz-travel:340 mmwork table::800 x 400 mmcontrol:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/mintotal power requirement:14 kWweight of the machine ca.:2400 kgdimensions of the machine ca.:2100 x 1800 x 2400 mm ... más información
Equipped with 24-way tool change magazine; including cooling and filter installation ... más información
Control system: CNC532, axes: 3, operating hours: 19565h, travel X/Y/Z: 600mm/400mm/500mm. ... más información
x-travel:600 mmy-travel:500 mmz-travel:400 mmspindle diameter:90 mmspindle turning speed range:45 - 2000 U/mintable length:1250 mmtable width:200 mmgroove width:14 mmtable rotating:45 °total power requirement:4,2 kWweight of the machine ca.:2000 kgdimensions of the machine ca.:2000 x 1800 x 1550 mmYear:ca.1957 Documents:vorhanden
Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.
Spindle speed: 12,000 rpm, control: Mazatrol, travel X/Y/Z: 1120mm/510mm/510mm (+180mm), table dimensions X/Y: 1460mm/510mm, max. table load: 1000kg, tool storage capacity: 30, rapid traverse: 36m/min. Machine works, but makes noises from the Y-axis. ... más información
Travel X/Y: 1300mm/800 mm, speed: 1000rpm, main spindle diameter: 70mm, horizontal stroke of drilling spindle: 420mm, max. distance spindle-table: 1900mm, number of feeds: 9, range of feeds: 0.05 - 2mm/rev, rapid traverse: 2400mm/min. Table dimensions X/Y: 990mm/670mm, dimensions X/Y/Z: approx. 3600mm/2400mm/2400mm, weight: 6200kg. Documentation available. On-site inspection is possible.
x-travel:6000 mmy-travel:2100 mmz-travel:1500 mmControls:HEIDENHAIN iTNC 530 BASIC DESIGN:. - basic design : travelling column :. WORKING RANGE -MILLING-:. - x-axis traverse:6000 mm - y-axis traverse:2100 mm - z-axis traverse:1500 mmFLOOR PLATE:. - clamping surface (left-right):7000 mm - clamping surface (front-back):2000 mmWORKING SPINDLE / HEAD:. - spindle type : orthogonal head :. - tilting range:360 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - tilting range (2nd axis):270 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - spindle revolutions (min):20 /min - spindle revolutions (max):4000 /min - spindle diameter:90 mm - taper fixture : ISO SK 50 :. - spindle power (continuous):32 kW - torque (max.):910 NmAXIS DRIVES:. - feed velocity (min):2 mm/min - feed velocity (max):20000 mm/min - rapid traverse:25000 m ...
x-travel:800 mmy-travel:630 mmz-travel:500 mmfeed stepless:1-7500 mm/minrapid traverse feeds:7500 mm/mintool cone:40 ISOspindle drive motor:10 kWturning speed range - spindle:20-4000 U/minTorque of spindles:630 Nmtotal connected load:25 kWweight of the machine ca.:5 tdimensions of the machine ca.:15 qm100 % before loadingwarranty:noneThe machine is in very good condition (only one prior owner), only few operating hours. Machine was installed first time and equipped with CNC Heidenhain TNC 355 in 1996. Other optional accessories can be delivered. Price basis: ex stock, free on trucktime of delivery: immediatly, prior sales reservedpayment:100% before loadingwarranty: nonetechn. documentation: as available.