Fabricante:
(Categoría: 103)
x-travel: 850 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1200 x 550 mmspindle taper: SK 40 control: HEIDENHAIN, TNC 121 spindle turning speed range: 36 - 1800 U/minquill stroke: 120 mmfeeds: 5 - 2000 mm/minrapid traverse longitudinal: 4 m/minrapid traverse vertical: 2 m/minmilling head -swivable +/-: 90 °table rotating: 360 °total power requirement: 12 kWweight of the machine ca.: 5 tdimensions of machine L x W x H: 2,80 x 2,0 x 2,61 mAccessories: vertical head with hydr. tool clamping and quill retraction, univ. table, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 22000 mmy-travel: 7500 mmz-travel: 1750 mmw-axis: 4400 mmdistance between columns: mmtable load: 500 tmilling slide: 105 kWspindle turning speed range: 2000 U/minmax. torque on the spindle: 13 kNmtool taper: feed in x - axis: 10000 mm/minfeed in y - axis: 10000 mm/minfeed range Z-direction: 10000 mm/mintable-size: 22000 x ? mmcontrol: Siemens 840C ram head dimension: 600 x 600 mmworkpiece height max.: 5300 mmtotal power requirement: - kVAweight of the machine ca.: - tdimensions of the machine ca.: - mPortal milling machine equipped with:- CNC control Siemens 840C- tool magazine- Head changing station with X-stations- Coolant system with paper belt filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg
We are selling Gantry Portal milling machine. - Modumill. Linear and circular interpolation, milling, carding, drilling, thread cutting, portal moveable... ... más información
max. wheel diameter: 0 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg ... más información
x-travel:1190 mmtotal power requirement:25 kWfeeds::3 - 2000 mm/minweight of the machine ca.:4,3 ttable-size:1600 x 400, 5 Spannbacken mmdimensions of the machine ca.:4000 x 3600 x 2200 mmspeeds:45 - 1800 U/miny-travel:530 mmz-travel:540 mmtool taper:ISO 50 control cabinet:940 kg ... más información
Manufacturer: CUGIR / Romania Tip: FV 36 CF Table size: 360 x 1600 mm Curse: - longitudinal: 1100 mm - vertical: 450 mm - transversal: 300 mm Main shaft taper: ISO 50 Spindle speed range: 32 - 1600 rpm. Work advances: - longitudinal and transverse: 19 - 950 mm/min. - vertical: 1/3 of the longitudinal advance Fast forward: - longitudinal and transverse: 2300 mm/min. - vertical: 1/3 of the longitudinal advance Main electric motor power: 7.5 kW Net weight of the car: 3450 kg
No. 4427: 1 gebr. Machine milling machine Fabr. DECKEL, type FP 4 L, Bauj. approx.82 with 3-axis digital display (1 digital display) Arb.-Ber.: 1200 x 400 mm, Accessories: Rigid angular table Div. Recordings SK 40 Other: Weight approx. 3.5 to Space requirement 3 x 2 x 2 m ... más información
x-travel: 4000 mmy-travel: 2000 mmz-travel: 1300 mmControl: Heindenhain type: TNC530i : table surface area: 5200x2000 mmTable load: 30000 kgpinole diameter: 230 mmnumber of T-slots: 11 T-slot - width: 28 mmT-slot - distance: 175 mmspindle taper ISO: 50 turning speeds: 40-2000 U/minspindle motor: 30 kWtransmission ratio: 4 total power requirement: kWweight of the machine ca.: 70 tdimensions of the machine ca.: 10x5,5x5,8 mMaschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible. ... más información
X-travel: 2000mm, y-travel: 1450mm, z-travel: 1400mm, quill stroke: 600mm, max. load: 12t, table dimensions: 1250x6000mm, length: 6150mm, width: 5050mm, height: 4430mm, weight: 24.35t, with documentation. ... más información
Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm ... más información
Rotational speed: 0-3150/min, weight: 3.38t. ... más información
table diameter:1400 mmx-travel:2200 mmy-travel:1200 mmz-travel:1100 mmc-axis:360.000 x 0,001 b-axis:+/- 60 °w-axis:350 mmdistance spindle center to column::1100 mmtable load:6 tspindle drive:15 kWTorque:4600 nMspindle turning speed range:10 - 1600 U/minspindle taper ISO:50 no. of tools in the magazine:20 Stücktotal power requirement:45 kWweight of the machine ca.:30 tdimensions of the machine ca.:5,8 x 5,8 x 4,9 mMachine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis- tool changer for 20 tools- spindle quill 350 mm as W-axis- rotary table as C-axis- angualar milling head indexable- oil cooler, chip conveyor, hand operating panel.
Description: SPECIFICATIONS Universal milling machine Brand: Maho Type: MH 500 C Control: Philips<, CNC 432 Year of construction: 1983 Table width: 650 mm Table width: 320 mm Displacement: X= 500 mm, Y= 400 mm, Z= 300 mm Spindle intake: ISO 40 mm Head adjustment: 90 degrees Manual available Machine size (lxwxh): 1,800 x 2,000 x 1,900 mm Note! CNC control defectiveApprox. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 1,900 mm, weight approx.: 2,000 kg
x-travel:700 mmy-travel:450 mmz-travel:500 mmtotal power requirement:23,4 kWweight of the machine ca.:3100 kgdimensions of the machine ca.:3200 x 4000 x 2500 mmtool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/Uspindle speeds::20 - 3150 , direkt programmierbar /minfeed range:1 - 3000, in B=0,01 - 3 U/minrapid traverse in x-y-z axis:6m/ min, B = 7,6 U/minwork table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432
The FU 251 universal milling machine was built in 1983. The machine is equipped with a table with dimensions (L x W) 1120 x 250 mm. The mechanical feeds of the working table in the X / Y / Z axis are respectively 765/230/390 mm, and manual feeds are 785/250/410 mm. The milling machine has three T-slots with a spacing of 14 mm and a steady rest. The total weight of the machine is 2 tons. Technical data of the universal milling machine FU 251 - working dimensions of the table (length x width): 1120x250 mm - mechanical table feeds in the X / Y / Z axis: 765/230/390 mm - manual table feeds in the X / Y / Z axis: 785/250/410 mm - accelerated longitudinal and transverse feed: 2500 mm / min - accelerated vertical feed: 1040 mm / min - longitudinal and transverse feed speed range: 12.5-630 mm / min, - vertical feed speed range: 5.2-262 mm / min - speed range of the longitudinal and ...