fresadoras usadas para la venta

No. 3701: 1 gebr. Vertical consol milling machine Fabr. HESSAPP, type HC 50 et, Bauj. 1981 with route control Heidenhain TNC 135 / Indramat Arb.-Ber.: 600 x 350 x 500 mm, drive power: 2.3 kW Accessories: Table area 1180 x 330 mm Other: Speed range 70 - 6000 rpm  ... más información

x-travel: 3000 mmy-travel: 1000 mmz-travel: 1000 mmControl: Heidenhain total power requirement: kWweight of the machine ca.: 13,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 290/300 mmy-travel: 160 mmz-travel: 330/340 mmengine output: 1,5/1,9 kWweight of the machine ca.: 0,7 tOptical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION:We would be happy to provide you with a free offer. However, please haveUnderstand that we only have inquiries with a complete addressto edit.2102-2047380 V, 50 Hz, with CEE plug and cableColor greenCompliance with the Machinery Directive on request at extra cost (see list below) # milling protection device electr. secured, integrated in the emergency stop chain!° already available:° Engine brake° Safety handwheels° 2 x emergency stop switches° Mandatory and prohibition signs according to the latest standard° Electrical acceptance according t ...

x-travel: 970 mmy-travel: 420 mmz-travel: 430 mmControl: Heidenhain TNC 135 number of speeds: 12 speeds: 31,5-1400 U/minfeed range lengthways and crosswise: 8-2000 mm/minfeed range - vertical: 4-1000 mm/minrapid traverse longitudinal and cross: 4 m/minrapid traverse Z-axis: 2 m/minweight of the machine ca.: ca. 3,8 tdimensions: ca. 3050x2350x2320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 3000 mmgear width: 1000 mmmax. module: min. module: Control: total power requirement: 40 kWweight of the machine ca.: 50 tdimensions of the machine ca.: 7 x 4,5 x 4,75 mThe machine was overhauled and modernized in 2006.CNC control: Siemens Sinumerik 840 DTable diameter: 2000 mmMax. wheel diameter: 3000 mmGear width: 1000 mmMax. module: 24/28Z axis: 1400 mmY axis: 450 mmX-axis: 970 mmMax. helix angle: 45 °Table hole diameter: 600 mmDistance between cutter center and table center: 200 - 2200 mmHob diameter: 390 mmMaximum length of the cutter: 600 mmRotary speeds of the hobs: 25 - 150 rpmTable load capacity max. 25000 kgTotal power requirement: 40 kWWeight of the machine: 50 tMachine dimensions: 7 x 4.5 x 4.75 mInternal aggregate with the smallest internal fi 980mm and the largest internalfi 2200 driven.With the external head we can have the smallest external fi 950 ...

x-travel: 850 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1200 x 550 mmspindle taper: SK 40 control: HEIDENHAIN, TNC 121 spindle turning speed range: 36 - 1800 U/minquill stroke: 120 mmfeeds: 5 - 2000 mm/minrapid traverse longitudinal: 4 m/minrapid traverse vertical: 2 m/minmilling head -swivable +/-: 90 °table rotating: 360 °total power requirement: 12 kWweight of the machine ca.: 5 tdimensions of machine L x W x H: 2,80 x 2,0 x 2,61 mAccessories: vertical head with hydr. tool clamping and quill retraction, univ. table, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22000 mmy-travel: 7500 mmz-travel: 1750 mmw-axis: 4400 mmdistance between columns: mmtable load: 500 tmilling slide: 105 kWspindle turning speed range: 2000 U/minmax. torque on the spindle: 13 kNmtool taper: feed in x - axis: 10000 mm/minfeed in y - axis: 10000 mm/minfeed range Z-direction: 10000 mm/mintable-size: 22000 x ? mmcontrol: Siemens 840C ram head dimension: 600 x 600 mmworkpiece height max.: 5300 mmtotal power requirement: - kVAweight of the machine ca.: - tdimensions of the machine ca.: - mPortal milling machine equipped with:- CNC control Siemens 840C- tool magazine- Head changing station with X-stations- Coolant system with paper belt filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

We are selling Gantry Portal milling machine. - Modumill. Linear and circular interpolation, milling, carding, drilling, thread cutting, portal moveable... ... más información

max. wheel diameter: 0 mmgear width: 150 mmmax. module: 2,5 min. module: total power requirement: 10 kWweight of the machine ca.: 2400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

1 set, 3 Sück servomotors for the spindle speeds. Weight: approx. 6 kg. Shipping with DHL possible by arrangement. The motors are from an NC tool milling machine, Fabikat: MAHO, Type: MH 600 P and have 100% until expansion. functioned. The parts can be viewed in consultation and are immediately available.

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg  ... más información

x-travel:1190 mmtotal power requirement:25 kWfeeds::3 - 2000 mm/minweight of the machine ca.:4,3 ttable-size:1600 x 400, 5 Spannbacken mmdimensions of the machine ca.:4000 x 3600 x 2200 mmspeeds:45 - 1800 U/miny-travel:530 mmz-travel:540 mmtool taper:ISO 50 control cabinet:940 kg ... más información

Description: Longitudinal 900 mm Transverse 300 mm Vertical 470 mm Useful surface: 300 x 1200 mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionApprox. Onsite Dimension. (l x w x h): 1,800 x 2,000 x 1,650 mm, weight approx.: 1,950 kg

Manufacturer: CUGIR / Romania Tip: FV 36 CF Table size: 360 x 1600 mm Curse: - longitudinal: 1100 mm - vertical: 450 mm - transversal: 300 mm Main shaft taper: ISO 50 Spindle speed range: 32 - 1600 rpm. Work advances: - longitudinal and transverse: 19 - 950 mm/min. - vertical: 1/3 of the longitudinal advance Fast forward: - longitudinal and transverse: 2300 mm/min. - vertical: 1/3 of the longitudinal advance Main electric motor power: 7.5 kW Net weight of the car: 3450 kg

No. 4427: 1 gebr. Machine milling machine Fabr. DECKEL, type FP 4 L, Bauj. approx.82 with 3-axis digital display (1 digital display) Arb.-Ber.: 1200 x 400 mm, Accessories: Rigid angular table Div. Recordings SK 40 Other: Weight approx. 3.5 to Space requirement 3 x 2 x 2 m  ... más información

x-travel: 4000 mmy-travel: 2000 mmz-travel: 1300 mmControl: Heindenhain type: TNC530i : table surface area: 5200x2000 mmTable load: 30000 kgpinole diameter: 230 mmnumber of T-slots: 11 T-slot - width: 28 mmT-slot - distance: 175 mmspindle taper ISO: 50 turning speeds: 40-2000 U/minspindle motor: 30 kWtransmission ratio: 4 total power requirement: kWweight of the machine ca.: 70 tdimensions of the machine ca.: 10x5,5x5,8 mMaschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible. ... más información

X-travel: 2000mm, y-travel: 1450mm, z-travel: 1400mm, quill stroke: 600mm, max. load: 12t, table dimensions: 1250x6000mm, length: 6150mm, width: 5050mm, height: 4430mm, weight: 24.35t, with documentation. ... más información

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm  ... más información