- Autómatas de sierras de cinta (111)
- Centros de serrado (1)
- Cortador de tubos (5)
- Máquinas afiladoras de sierras de cinta (4)
- Máquinas de sierra de cinta de ingletes (3)
- Máquinas hydraulicas de sierra de cinta de ingletes para metales (1)
- Otras sierras mecánicas (5)
- Serrucho dobles (43)
- Serruchos circulares de mesa (2)
- Serruchos circulares de metal (22)
- Serruchos de capas (5)
- Serruchos de fermentación (6)
- Sierras circulares (107)
- Sierras circulares automáticas (31)
- Sierras circulares completamente automáticas (4)
- Sierras circulares de ingletes (10)
- Sierras circulares en frio (94)
- Sierras circulares en frío hydraulicas (4)
- Sierras con suelo (3)
- Sierras de arco (50)
- Sierras de banda semiautomáticas oblicuas (2)
- Sierras de calar elevadoras oscilantes (2)
- Sierras de cinta (180)
- Sierras de cinta completamente automáticas (1)
- Sierras de cinta de doble sesgo (6)
- Sierras de cinta de metal de alta potencia (3)
- Sierras de cinta horizontales (47)
- Sierras de cinta semiautomáticas (7)
- Sierras de cinta verticales (45)
- Sierras de mano (1)
- Sierras mecánicas (5)
- Sierras mecánicas de arco (5)
- más
- ABB (1)
- ABCD MACHINERY (1)
- ADAL (1)
- ADICE (1)
- ADIGE (2)
- AEG (1)
- ALUMINIUMKREISSäGE (1)
- Amada (10)
- ANTON (1)
- Arntz (6)
- ATECH (2)
- AYEL-TECH (6)
- BAHCO (1)
- BANDSAEGE (1)
- BAUER (4)
- BAUER-MASCHINENBAU (1)
- Behringer (42)
- BEHRINGER - HALBAUTOMAT (1)
- Behringer Eisele (2)
- BEKA-MAK (47)
- BEKAMAK (1)
- BENATO (1)
- Berg + Schmid (66)
- BERG SCHMID - HALBAUTOMAT (1)
- BERG-SCHMID (2)
- Bernardo (8)
- BEWO (2)
- BIANCO (25)
- BIGSTON (1)
- BIMAX (1)
- BMSY (2)
- BOMAR (9)
- BOMAR - (1)
- BOMAR WEIRA (1)
- Bosch (3)
- BSM (2)
- BTM (1)
- BTM - VOLLAUTOMAT (1)
- Bulmak (2)
- CARIF (1)
- CARTER CNC (1)
- CEDIMA (1)
- CHANNEL LETTER SAW (1)
- CIEMME-EMMEGI (1)
- Cosen (3)
- Daiss + Partner (2)
- DAIß (1)
- Danobat (4)
- DDR (1)
- DELTA (1)
- DoAll (5)
- DOELL (1)
- DORNSEIF (1)
- EBG-TECH #4950 (1)
- ECKERT (1)
- Eisele (43)
- EISELE - Halbautomat (5)
- EISELE EMMEGI (1)
- EISELE THOMAS (1)
- ELEKTRA BECKUM (3)
- ELU (3)
- Elumatec (30)
- Emmegi (6)
- ERCOLE (1)
- EVERISING (2)
- EYLTOOL (1)
- FABRIS (1)
- FABRIS ITALY (1)
- Fein (3)
- FELDER (1)
- FEMI (1)
- FERINA (1)
- Flamme (3)
- FLOTT (3)
- FMB (2)
- FMB - JUPITER -FULL AUTO (1)
- FMB - ORION - AUTOFEED (1)
- FORTE (10)
- FORTEMAT (2)
- FORTUNA (1)
- FRAMAG (1)
- FRIGGI (8)
- GEISS + PARTNER (1)
- GEORG FICHER (1)
- GEORG FISCHER (13)
- GEORG FISCHER (ORBITALUM) (1)
- Georg Fischer / Orbitalum (5)
- GEORG FISCHER/ ORBITALUM (1)
- GERD WOLFF (18)
- GRAULE (5)
- GROB (2)
- HABUSCH (5)
- HAFFNER (1)
- HBA (1)
- HBM (5)
- HBS (1)
- HEBOE (1)
- HELLER (2)
- HESKA (9)
- HESSE by BEKA-MAK (31)
- ... más
Fabricante:
(Categoría: 105)
usado
30 € Description: saw blade dimensions: 150 x 19 x 1,8 mm , table dimensions: 480 x 400 mm , weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 500 x 450 x 800 mm ... más información
Año de construcción: 2010
usado
850 € Description: Roller feed 1500 x 370 mm, , Roller outfeed 1500 x 370 mm, with stop 1680 mm Includes metal replacement saw blades band dimensions: 2950x27x0,9 mm, cutting range 90 degrees: flat: 280x200 mm, cutting range 90 degrees: round: 250 mm, cutting range at 45°: flat mat.: 180x180 mm, cutting range 45 degrees: round: 190 mm, cutting range 45 degrees: square: 180 mm, weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,600 mm
usado
350 € Description: Cutting width approximately 320 mmweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,000 x 800 mm ... más información
Año de construcción: 2006
usado
- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head
Año de construcción: 1999
usado
cutting diameter: 300 mmsaw band length: 4640x41x1,3 mmcutting width: 300 mmcutting speed: 19-130 m/mintotal power requirement: 7 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,3x2,3x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Año de construcción: 2013
usado
Capacity 300 x 180 mm / ø 255 mm / square 230 x 230 mm Semi-automatic Double-sided miter 0-60 left / 0-45 right ... más información
Año de construcción: 2020
usado
Capacity: 280 x 220 mm Double sided miter Mist lubrication ... más información
Año de construcción: 2005
usado
Capacity 410 x 260 mm Double-sided miter Semi-automatic Mist lubrication system Digital angle readout ... más información
usado
Cutting area: dia. 220mm, U/I beam : 400 x 150 , feed rate: 0- 500mm/min , drive motor: 5hp, 1700kg, sgt. Condition. ... más información
Año de construcción: 1978
usado
cutting diameter: 170 mmband length: 350 mmcapacity 90 degrees: square: 160 mmcapacity 90 degrees: flat: 170 x 220 mmtotal power requirement: 0,85 kWweight of the machine ca.: 180 Kgdimensions: 1,2 x 0,8 x 1,0 mHydraulic hacksaw with:- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
cutting diameter: 220 mmband length: 420 mmcapacity 90 degrees: square: 210 mmcapacity 90 degrees: flat: 220 x 350 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,65 Kgdimensions: 1,2 x 0,8 x 1,1 mHydraulic hacksaw with:- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nuevo
capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mLeasing returns, little work done.Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height finder - Cutting monitoring by ammeter - Cutting pressure feed regulator - Miter cuts up to 60° left and 45° right - Quick-action clamping stick can be moved - Quick release lever - Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Año de construcción: 2007
usado
- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition
Año de construcción: 2009
usado
cutting diameter: 335 mmdimensions of saw-band: 4400x34x1,1 mmtable height: 750 mmmin. dia.: 5 mmcapacity 90 degrees: round: 335 mmcapacity 90 degrees: flat: 500x335 mmcutting speed: 15-150 m/minclamping range bunching voltage: 0-500 / 15-335 Breite / Höhe: 0-600 / 0-6000 Einf. / Mehrf.weight of the machine ca.: 1600 kgdimensions of the machine ca.: 2230x2350x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Año de construcción: 1988
usado
cutting diameter: 260 mmsaw band length: . mmcutting width: . mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
usado
Plate Saw for Iron Plates Saw blade dia. 350mm, stroke: approx. 500mm, mitre and swivel possible To be visited under electricity ... más información
Año de construcción: 1996
usado
cutting diameter: 260 mmsaw band length: 2910 mmcutting width: 0,9 mmcapacity 45 degrees: round: 200 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 300 x 260 mmcapacity 60 degrees: round: 165 mmcapacity 60 degrees: square: 150 x 150 mmcapacity 60 degrees: flat: 160 x 120 mmcutting speed: 35 / 70 m/mindimensions of saw-band: 2910 x 27 x 0,9 mmheight of material-table: 950 mmtotal power requirement: 2,0 kWweight of the machine ca.: 400 kgdimensions of machine L x W x H: 1,70 x 0,90 x 1,67 Accessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usado
Circular sawing machine. unfortunately no technical data. ... más información
Año de construcción: 2024
usado
automatic feeding, chip conveyor, L-310, W-210, H- 180cm ... más información
Año de construcción: 1985
usado
250 € Description: Discharge roller conveyor Length each 2000 mm Roller width 240 mm Incl. KRÄMER extractionApprox. Onsite Dimension. (l x w x h): 750 x 700 x 1,200 mm, weight approx.: 250 kg ... más información