sierras usadas para la venta

The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...

The machine is in good technical condition, after agreement possibility of inspection. Size: 1494x1137x1243 mm Dimension of saw band: 2910x27(25)x0,90mm Weight: 358 kg Supply voltage: 3x400 V TN-C-S Motor power: 1.0/1.5 kW Total power input: 1.7 kW Degree of protection: IP 54 Maximum overcurrent protection: 16 A Rated speed: 2800/1420 m/min Cutting speed: 40 / 80 m/min

Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via E 355 Digital angle indicators on both units for pan and tilt Travelling roller conveyor Material Pad Minimum Quantity Spraying Device Machine is loaded freely  ... más información

cutting diameter: 260 mmserial number: 109967 volt: 380 Vfrequency: 50 Hzweight of the machine ca.: 500 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3505 x 32 x 0,95 mmcutting width: mmControl: total power requirement: 8 kVAweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1937 x 1850 x 1570 mmNC-controlled band saw machine for series cuts with differentlengths and quantities for all materials.Technical data:Cutting capacityCutting diameter 250 mmBelt speed 24 - 90 m/min. - steplessSaw band dimensions 3505 x 32 x 0.95 mmBelt drive 3.7 kWTable height 550 mmEquipment:Chip conveyorCoolant deviceRunwayOperation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 58300 €: 1171.83 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 0.12 kW: 2.2 kW: 5.5 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping € 2.300,- Micro cooling unit € 890,- Roller table3 m € 4.440,- Laser cutting line € 560,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 1,900 mm, weight approx.: 1,000 kg ... más información

Description: Including roller conveyor  , Attention: without visible materialApprox. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,200 mm, weight approx.: 3,000 kg ... más información

Description: Machine number: 18401 Table dimensions: 800 x 750 mm Cutting height: approx. 100 mm Incl. grindstone and a device for welding saw bands Also 2 integrated drawersweight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 900 x 2,000 mm ... más información

Description: Machine number: 82416 Cutting length: approx. 400 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 600 x 1,000 mm ... más información

elumatec Double Mitre Saw DG104 Year of construction: 1995 Control: E255 Saw blade diameter 420 mm Saw blade bore 30 mm Cutting length 6000 mm Tilt range 45 + 90° Inward swivel range 90 - 22.5° Saw blade speed 2800 rpm. Smallest cutting length 335 mm Power 2 x 4000 W  ... más información

Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories  2 pieces of bandsaw blades Other accessories on request Price and other technical data on request

Specifications: Sawing area 90° round: 300 mm 90° flat: 300 x 300 mm Feed rate: 10 mm Multi-feed: 6000 mm Max. sawing speed: 0 - 115 1/min Dimensions (WxDxH), approx.: 2580 x 2300 x 1850 mm Equipment: -Conveyor - Coolant device - Emergency stop push button  ... más información

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

Article code: 19-03-035 Manufacturer: Kasto Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1600x800x1300mm Weight: approx. 500kg Saw blade dimensions: approx. 450mm Cutting diameter: approx. 200mm Accessories  Cutting pressure adjustable  Coolant device  9 pieces of saw blades Other accessories on request Price and other technical data on request

Description: Serial number: 3603M03400 Nominal speed: 5000 rpm Nominal power: 1400 W Table dimensions: approx. 640 x 600 mmweight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 500 mm ... más información

Description: Fabrication number: 57900023 Operating voltage: 3 x 380 V Frequency: 50 Hz Connection: 3 kW Cutting length: approx. 450 mm Incl. roller trestles Roller width: approx. 320 mm Incl. large lot of suitable saw bladesApprox. Onsite Dimension. (l x w x h): 3,000 x 2,300 x 1,300 mm, weight approx.: 500 kg

Description: Table dimensions: approx. 675 x 500 mm Speed range: 90 - 3000 rpm Mobileweight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 750 x 1,100 mm ... más información