- Autómatas de sierras de cinta (111)
- Centros de serrado (1)
- Cortador de tubos (5)
- Máquinas afiladoras de sierras de cinta (4)
- Máquinas de sierra de cinta de ingletes (3)
- Máquinas hydraulicas de sierra de cinta de ingletes para metales (1)
- Otras sierras mecánicas (5)
- Serrucho dobles (43)
- Serruchos circulares de mesa (2)
- Serruchos circulares de metal (22)
- Serruchos de capas (5)
- Serruchos de fermentación (6)
- Sierras circulares (107)
- Sierras circulares automáticas (31)
- Sierras circulares completamente automáticas (4)
- Sierras circulares de ingletes (10)
- Sierras circulares en frio (94)
- Sierras circulares en frío hydraulicas (4)
- Sierras con suelo (3)
- Sierras de arco (50)
- Sierras de banda semiautomáticas oblicuas (2)
- Sierras de calar elevadoras oscilantes (2)
- Sierras de cinta (180)
- Sierras de cinta completamente automáticas (1)
- Sierras de cinta de doble sesgo (6)
- Sierras de cinta de metal de alta potencia (3)
- Sierras de cinta horizontales (47)
- Sierras de cinta semiautomáticas (7)
- Sierras de cinta verticales (45)
- Sierras de mano (1)
- Sierras mecánicas (5)
- Sierras mecánicas de arco (5)
- más
- ABB (1)
- ABCD MACHINERY (1)
- ADAL (1)
- ADICE (1)
- ADIGE (2)
- AEG (1)
- ALUMINIUMKREISSäGE (1)
- Amada (10)
- ANTON (1)
- Arntz (6)
- ATECH (2)
- AYEL-TECH (6)
- BAHCO (1)
- BANDSAEGE (1)
- BAUER (4)
- BAUER-MASCHINENBAU (1)
- Behringer (42)
- BEHRINGER - HALBAUTOMAT (1)
- Behringer Eisele (2)
- BEKA-MAK (47)
- BEKAMAK (1)
- BENATO (1)
- Berg + Schmid (66)
- BERG SCHMID - HALBAUTOMAT (1)
- BERG-SCHMID (2)
- Bernardo (8)
- BEWO (2)
- BIANCO (25)
- BIGSTON (1)
- BIMAX (1)
- BMSY (2)
- BOMAR (9)
- BOMAR - (1)
- BOMAR WEIRA (1)
- Bosch (3)
- BSM (2)
- BTM (1)
- BTM - VOLLAUTOMAT (1)
- Bulmak (2)
- CARIF (1)
- CARTER CNC (1)
- CEDIMA (1)
- CHANNEL LETTER SAW (1)
- CIEMME-EMMEGI (1)
- Cosen (3)
- Daiss + Partner (2)
- DAIß (1)
- Danobat (4)
- DDR (1)
- DELTA (1)
- DoAll (5)
- DOELL (1)
- DORNSEIF (1)
- EBG-TECH #4950 (1)
- ECKERT (1)
- Eisele (43)
- EISELE - Halbautomat (5)
- EISELE EMMEGI (1)
- EISELE THOMAS (1)
- ELEKTRA BECKUM (3)
- ELU (3)
- Elumatec (30)
- Emmegi (6)
- ERCOLE (1)
- EVERISING (2)
- EYLTOOL (1)
- FABRIS (1)
- FABRIS ITALY (1)
- Fein (3)
- FELDER (1)
- FEMI (1)
- FERINA (1)
- Flamme (3)
- FLOTT (3)
- FMB (2)
- FMB - JUPITER -FULL AUTO (1)
- FMB - ORION - AUTOFEED (1)
- FORTE (10)
- FORTEMAT (2)
- FORTUNA (1)
- FRAMAG (1)
- FRIGGI (8)
- GEISS + PARTNER (1)
- GEORG FICHER (1)
- GEORG FISCHER (13)
- GEORG FISCHER (ORBITALUM) (1)
- Georg Fischer / Orbitalum (5)
- GEORG FISCHER/ ORBITALUM (1)
- GERD WOLFF (18)
- GRAULE (5)
- GROB (2)
- HABUSCH (5)
- HAFFNER (1)
- HBA (1)
- HBM (5)
- HBS (1)
- HEBOE (1)
- HELLER (2)
- HESKA (9)
- HESSE by BEKA-MAK (31)
- ... más
Fabricante:
(Categoría: 105)
usado
usado
usado
520 € Equipped with material clamp, pneumatic lifting + lowering, including various spare saw belts ... más información
Año de construcción: 1992
usado
roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m ... más información
usado
usado
50 € The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site. ... más información
usado
usado
Año de construcción: 2019
usado
This KASTOWIN A4.6 sawing machine was manufactured in 2019. With a cutting range of 460 mm, its suitable for various material sizes, offering flexible operation. The machine has a hydraulic material clamping system and a saw motor with variable cutting speed ranging from 12 to 150 m/min. Its dimensions are 1650 mm in length, 2900 mm in width, and 2030 mm in height, with a weight of 3450 kg. Consider purchasing this KASTOWIN A4.6 for enhanced sawing capabilities. Contact us for further details regarding this sawing machine.
usado
Año de construcción: 2013
usado
This PRESSTA EISELE Profilma 600 R was manufactured in 2013. It features a 9.2 kW drive with an 18.5 kW reinforced option and uses saw blades with a diameter of 600 mm. The cutting range allows for a maximum cutting height of up to 210 mm and a maximum cutting width of 350 mm. It includes a Siemens S7-300 control system and a chip extraction system with a 4 kW motor. Contact us for more information.
usado
200 € blade length 430mm; 5047 ... más información
usado
usado
usado
usado
usado
usado
usado
Año de construcción: 1987
usado
cutting diameter:520 mmsaw band length:7239 x 50 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mintotal power requirement:9,5 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3,5 x 2,2 x 2,1 m- Multifeed device- infeed roller stand- chip conveyor- automatic operation