Fabricante:
(Categoría: 105)
UZAY MAKINA UMSY 1300 band saw was built in Turkey in 2001. The machine, equipped with a high-quality saw blade with hydraulic blade tension and the possibility of adjusting the cutting height via a control panel, is designed for the precise cutting of workpieces made of even the hardest materials, such as titanium. The specially designed double-jaw vise system significantly increases the capacity of the machining process, thanks to the possibility of positioning the workpiece at the front and at the back of the UZAY MAKINA UMSY 1300-1600 SP machine. The UZAY MAKINA 1300 x 1600 double-column sawing machine weighs approximately 8200 kg. Technical data of the UZAY MAKINA UMSY 1300 band sawing machine - saw blade dimensions (L x W x H): 12000 x 67 x 1.6 mm - maximum cutting speed: 100 m/min - minimum cutting speed: 20 m/min - maximum cut at 90° (circle): 1300 mm - maximum cut at ...
From insolvency: Light Alloy Circular Saw Mep Cobra 352 MA Year of construction 2018 Saw blade diameter 350mm 2 pneumatic material clamps I2qszckei Coolant system Roller conveyor left 1800mm Stop right 600mm 2 sawing speeds 1700 / 3400 rpm Mitre cuts li + re 40/45° Shifter cuts up to 45° 380 volts 2.2KW + 1 pc newly ground saw blade Replacement stop jaws Capacity Cutting range ROUND 0°: 120 mm Cutting range AROUND 45° left: 120 mm Cutting range AROUND 45° right: 110 mm Cutting area SQUARE 0°: 105 mm Cutting area SQUARE 45° left: 100 mm Cutting area SQUARE 45° right: 95 mm Cutting area FLAT 0°: 180 x 70 mm Cutting area FLAT 45° left: 135 x 60 mm Cutting area FLAT 45° right: 135 x 60 mm Cutting range inclined ROUND 45°: 50 mm Cutting range SQUARE 45° inclined: 50 mm Cutting area FLAT 45° inclined: 160 x 35 mm / 180 x 20 mm
Weight: 1240 kg Equipment: - 1 roller conveyor (3 m) - Roll width: 34 cm (with 1 length measuring device) - 1 roller conveyor (5 m) - Roll width: 62 cm ... más información
Double miter saw Rapid for aluminium and plastic profile rod material or wood Machine No. 344 2 swivel saw blades, adjustable between 45 and 90° Motor 3.5 kW each Cutting length 3000 mm smallest cutting length 220 mm Workpiece width maximum 130 mm Saw blade diameter 420 mm pneumatic pressure cylinders each 1 piece from the front 1 pneumatic pressure cylinder from above Working length adjustable automatically or Fine adjustment manually via handwheel Weight 1,400 kg
Semi-automatic aluminium saw for 90° cuts with positioning unit and discharge roller conveyor Max. saw blade diameter: 400 mm (mounted 350 mm, sharp 400 mm saw blade included) Max. positioning length: 3,000 mm New control panel with touch panel in 2021 ... más información
J.Vuille-Biel -blade circular saw machine: D. 160 mm -vise max. opening 30 mm -with or without feed / stroke max. 640 mm -roll band: 2000 mm -coolant system -machines size: 2400 x 650 x 1340mm -Controlled by air ... más información
Required space, approx.: 800 x 600 mm Weight, approx.: 600 kg Equipment: - Tape soldering device - 2 band saw blades ... más información
Manufacturer : Kasto Type : Verto A2 Year of construction : 2015 Control : Basic-Control Kasto Location : from the beginning of March 2024 from warehouse Sweden Easy-to-use Basic Control control Frequency-controlled, infinitely variable saw drive Infinitely variable, hydraulic saw feed Two hydraulic horizontal clamping vices Electromotive material feed via ball screw Specifications Cutting range 90° round. :260 mm Cutting range 90° flat (W x H): 320 x 260 mm Cutting range 90° square: 260 x 260 mm Shortest remnant length: 6 mm Smallest saw diameter: 10 mm Band saw dimensions: 3,180 x 27 x 0.9 mm Cutting speeds: 12-120 m/min Material support height: 950 mm Weight. 1,360 kg Dimensions. 2,365 x 2,250 x 1,767 mm (without roller conveyor) Automatic Band Saw with Reduced Volume Other equipment - Automatic zero positioning of the first saw section - Coolant ...
Description Mossner Record vert. Band saw. The welding machine is defective! Specifications Manufacturer Mossner-Rekord Model SSF-420 Use State ... más información
Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9 ... más información
Electrical voltage 400 / 440 V Frequency 50 / 60 Hz N° Phases 3 / 3 Ph ... más información
The ELUMATEC SA 142/36 automatic aluminium cutting saw was manufactured in 2001 by the German brand ELUMATEC. The machine can be used for cutting aluminum profiles and PVC joinery. So far, it has only been used for cutting aluminium profiles. - Surface-specific material feeding (cyclic) via profile lifting system on one level - Single, double or triple feeding via selector switch - Safe material feeding thanks to two horizontal pressure cylinders Cvmmdigqg2 - Large cutting surface for wide profiles Technical parameters of the ELUMATEC SA 142/36 aluminium cutting saw: - saw speed: 2800 rpm. - cutting angle: 90 degrees to 45 degrees at SA 142/36 - cutting angle: 90 degrees at SA 142/36 - power output: 4000 W - Cutting unit feed: adjustable gradually - feed length/stroke : 5 to 730 mm - material transport: transport in step steps, pneumatic - air consumption without sprink ...
Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories 2 pieces of bandsaw blades Other accessories on request Price and other technical data on request
Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication
Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height approx.: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds : 40 / 80 m/min Motor output power S1 100%: 0.75 kW Voltage : 400 V Machine dimensions : 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vi ...
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Automatic positioning of the sawing unit via E 255 control system Cutting range at 90°: 195 x 120 mm Cutting range at 45°: 135 x 120 mm Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication
Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication
WE OFFER AN VERY NICE DOALL HEAVY SAW - NC FULLY AUTOMATIC WITH COMPLETE CONWENYOR RAILS AND SPARES BLADES ON STOCK 13X NEW BLADES INCLUDED CUTTING CAPACITY: 100 -700mm 100W x 100H - 800W x 700H mm BLADE SIZE: 8250 x 67 X 1,6 mm SPEED: 16-85mm TENSION: BY HYDRAULIC COOLANT: 230L FEEDING LENNGHT : 400mm SINGLE TIME OR MULTIPLE TIMES DIMENSIONS OF MACHINE: 3910 W x 2330H x 2350L WEIGHT: 7000 KG FOR OUR CUSTOMERS WE ORGANIZE TRANSPORT WORLD WIDE MAKING EXPORT DOCUMENTS