Fabricante:
(Categoría: 106)
No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973 ... más información
Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg
Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg ... más información
Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm
Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg
pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 860x620 mmram surface: 540x360 mmhole in the table: Ø 270 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive tool changing unit:2 x
pressure:500 tdistance between columns:3400 mmstroke:850 mmno. of strokes:9 - 18 /mindistance table/ram, max. stroke up, adjustment up:2050 mmtable surface area:3100 x 1900 mmtable height over floor:400 mmside window:1550 mmram surface:3100 x 1900 mmram adjustment:350 mmpressure of drawing cushion in ram:70 tpressure of drawing cushion in table:140 tstroke of drawing cushion in table:0 - 250 mmstroke of drawing cushion in ram:150 mmheight beneath floor:6,0 mheight over floor:8,3 mweight:155,0 tdimensions (WxDxH):5,1 x 4,5 x 12,3 mKind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x
pressure:250 tthroat:450 mmstroke:36 - 126 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:525 mmtable surface area:1000 x 750 mmhole in the table:400 x 360 mmtable height over floor:1000 mmram surface:600 x 500 mmram adjustment:111 mmpower requirement:19,0 kWweight:13,5 tDimensions (WxDxH):1,3 x 3,2 x 3,35 mclutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric
pressure:160 tthroat:690 mmstroke:8 - 180 mmno. of strokes:50 /mindistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1000 mmhole in the table:400 / 120 mmtable height over floor:850 mmpassage to the back:900 mmram surface:1000 x 700 mmram adjustment:130 mmpower requirement:11,0 kWweight:19,0 tdimensions (WxDxH):2,4 x 2,8 x 3,4 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic
pressure: 40 tthroat: 230 mmstroke: 8-88 mmthroat: 230 mmno. of strokes: 130 Hub/minram - range of adjustment: 63 mmtable surface area: 560x450 mmram surface: 250x200 mmhole in the table: Ø 190 mmtable height: 790 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,0 tdimensions of the machine ca.: 1000x1800x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg
The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg
CONTROLS PLC PNEUTRONIC PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 13 mmV-RING nominal force: 75 to stroke: 15 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mmSTRIP-FEEDER feeder type: roll feeder pilot release system: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...
pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign
Pressure:800 tdistance between columns:2560 mmstroke:1050 mmDistance table/ram, stroke up:1870 mmTable surface area:2500 x 1730 mmpressure of drawing cushion in table:300 tDie cushion stroke in table:395 mmDie cushion area in table:2300 x 1300 mmRam surface:2500 x 1730 mmDie cushion pressure in ram:63 tDie cushion stroke in ram:150 mmSide window:1000 mmOil volume:4300 lPower capacity:200,0 kWDimensions (WxDxH):4,1 x 2,8 x 10,0 mHeight above floor:7,0 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable