máquinas de soldar usadas para la venta

Description: Serial nº: A0216L0095 Laser Type: Trudisk 2001 Laser power: 2000 W Power: 400V/50Hz Maximum sheet dimensions: 3000x1500 mm Automatic loading with 2 tables , Working Hours: 17.071 laser capacity: 2 kW, weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 7,974 x 8,972 x 3,004 mm

Description: Wheel welding machine in a water bath, perfect for welding tubs to steel worktops. It uses the same technology as a spot welder, but applied continuously via a wheel, which allows for continuous, stagnant welding between sheets. The water jet allows the steel not to heat up and not deform. Also equipped with two additional water collection tanks suitable for surfaces up to 5 meters long. Its working range is 1500 x 900mm, welding speed from 3 to 7 m/min depending on the thicknesses to be welded. No programming software is needed as everything is done from the machine. The production cycle on the machine consists of a first spot welding phase to lock the tank to the surface, followed by the actual welding, a single cycle without tool changing. Machine not used since 2018, used for about a hundred hours, practically still new, only the NC battery needs to be replaced and th ...

Description: Serial Number:E 6997 Machine Number: A023A0380 Laser: ,TLF 5000 TM Laser working Hours: 74214 Laser Power: 5000w Travels: , X: 3000 mm Y: 1500 mm Max. speed X : 100 m/min Max. speed Y: 60 m/min Max. speed Z: 60 m/min Simultaneous Speed X-Y Max. 60-85 mm Important Note: Controller display need to be checked The Y-axis needs a new encoder, it is damaged, Vacuum pump is requesting replacement, Laser beam does not release, laser telegrams are not understood by the equipment, Pallet changer is not working appropiatelly, needs to be checked The machine has been dismantled and is stored according to photo 13. Read off operating hours: 74,214 h, laser capacity: 5 kW, control: SINUMERIK840DI, operating hours of laser: 74,214 h, weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 11,250 x 4,600 x 2,400 mm

Description: Machine Specifications Axis processing movement : Stationary table with X-Y-Z movement Maximum work piece size X-Y : 1525mm x 3050mm Work table height : 900mm Axis travel X-Y : 1580mm x 3100mm Zaxis travel : 150mm Rapid traverse rate X-Y : 60m/min Rapid traverse Z : 60m/min Design : Bridge gantry style Axis drive system X1/X2-Y : Rack & pinion drive Axis drive system Z : Belt drive Positional accuracy X-Y : +/- 0.05/ 500mm Positional accuracy : +/1 0.01/ 100mm Repeatability X-Y-Z : +/- 0.03mm Cutting head : Mazak multi-control torch 2 Z axis profiler : Non-contact type/Z-axis follow type Lighting system : LED light Operation status indicator lights : Yellow/laser source on, red/laser beam on Programmable assist gas ports : 3 types (Oxygen, air and assist gas Noise level laser : Max 80dBA Machine base : Precision machined single cast iron System weight : 13,400kg Laser Gene ...

Description: serial number: L_0401 work time: approx. ,12604 hrs. emission time: approx. ,5995 hrs.  , laser source: type of source: Fiber max. ,power: 2000 W  , worktable dimensions (X Y): ,3048 x 1524 mm Z-axis stroke: 100 mm  , max. positioning speed: 120 m/min max. consumption: 18 kW  , cutting capacity (thicknesses): steel (S185JR,S235JR, RAEX 250 C LASER): ,0.5 - 15 mm stainless steel (AISI 304, X5CrNi18-10 1.4301): 0.5 - 10 mm aluminium (Al 99.5 EN AW 1050A): ,0.5 - 8 mm copper (Cu-ETP CW004A H040 EN1652): ,0.5 - 5 mm brass (CuZn37 CW508L H055 EN1652): 0.5 - 5 mm  , transport information: 2 trucks required for collection table length: 3,048 mm, table width: 1,524 mm, laser capacity: 2 kW, total power requirement: 18 kW, weight approx.: 16,000 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,400 x 2,300 mm

Description: MACHINE LINE , 1. 2 robots KUKA KR 210-2 2000grippers: Serial No. 920942 (2010) Serial No. 920991 (2010) Control KRC2 Keyence Camera , 2.2 turn tables for racks HEINRICHS ,Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,500 kg ... más información

Description: From an automotive manufacturer due to production changes WELDING LINE Machine Centre 1.Equipment data & configurationRobot : 1.1 Robot KUKA KR 210 L180-2 2000 - Serial No. 920941 - Control KRC2 2.1 turn table for racks HEINRICHS Ø4100mm 3.1+1 NOK/quality parts conveyor 4.1+1 rework áreawith turn table Ø3000mm 3. 2 HMI Siemens MP277Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,500 kg

Description: Welding cell unit composed as: Robot KUKA , Type: KR30L6-2 Article Number: 10022094 Serial  ,Number: 709150 YOM: 2017 weight: 700 kg , Load capacity: 16kg Working Range : 3102 mm Controller and pendant KUKA Model: KR C4 Serial Number: 331261 Rotating table VP3-V2H500 , Serial Nubmer: 152219 YOM: 2017 FRONIUS TPS welding machine Serial Number: 28185846 YOM: 2017 Power: 1.4kw Security fences Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 2,520 mm, weight approx.: 6,000 kg

Description: WELDING LINE , 50 1. 2 Mag robot with control Equipmentdata & configurationRobot : 2 Robot KUKA KR 5 arc HW .  ,Serial No. 985515 (MASTER) and 985516 (SLAVE) Control KRC2 YOM 2010 2.Equipment data & configuration Weldingcontrol - 2 sks welding control : Power Source LSQ4. - 2 Control Q8P. - 2 Torch and wire feeder sks. 3. Rolldoor gate - 1 Rolldoor Seuster KG - Type S800oZ - Size 1600 x 2100 mm , 4. 1 Positioner - Positioner three axis Ø4300mm - KUKA KPF3_V2H750 5. 2 Clean unit - J.Thielmann - Type BRG2000 Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,000 kg

Description: From an automotive manufacturer due to production changes WELDING LINE 20 , 1. Mag robot with control ,Equipmentdata & configurationRobot : - 2 Robot KUKA KR 5 arc HW . - Serial No. 985512 (MASTER) and 985510 (SLAVE) - Control KRC2 2.Equipment data & configuration Weldingcontrol - 2 sks welding control : Power Source LSQ4. - 2 Control Q8P. - 2 Torch and wire feeder sks. 3. Rolldoor gate - 1 Rolldoor Seuster KG - Type S800oZ - Size 1600 x 2100 mm , 4. 1 Positioner - Positioner three axis Ø4300mm - KUKA KPF3_V2H750 5. 2 Clean unit - J.Thielmann - Type BRG2000 6. 1 HMI Siemens MP277  ,Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,000 kg

Description: From an automotive manufacturer due to production changes WELDING LINE 10 , 1. Mag robot with control, ,- Equipmentdata & configurationRobot : 1 Robot KUKA KR 5 arc HW . Serial No. 985519 (2010) Control KRC2 2.Equipment data & configuration Weldingcontrol  ,1 SKS  ,welding control: Power Source LSQ4  ,1 Control Q8P.  ,1Torch and wire feeder sks. 3. Rolldoor gate 1 Rolldoor Seuster KG Type S800oZ Size 1600 x 2100 4. Positioner •1 Positioner three axis Ø4300mm •KUKA KPF3_V2H750 5.  ,Clean unit -J.Thielmann -Type BRG2000 6. Conveyor 7. HMI Siemens MP 277Approx. Onsite Dimension. (l x w x h): 5,000 x 2,500 x 2,200 mm, weight approx.: 2,000 kg

Description: Welding cell unit composed by: , Robot KUKA , Type: KR30L6-2 Article Number: 10022094 Serial  ,Number: 709149 YOM: 2017 weight: 700 kg , Load capacity: 16kg Working Range : 3102 mm Controller and pendant Type: KR C4 Serial Number: 331262 , Rotating table VP3-V2H500, the bed is not included Número de serie: 152218 Año fabricacion: 2017 FRONIUS TPS welding machine Serial Number: 28185845 Model_ TPS 400ipulse , YOM: 2017 Power: 1.4kw Security fences Approx. Onsite Dimension. (l x w x h): 4,000 x 2,400 x 2,520 mm, weight approx.: 6,000 kg

Description: Machine Specifications: Max. Sheet Dimensions: 5040 x 1550 mm Max. Sheet Weight: 330 kg Max. Slide Stroke (X): 2520 mm Max. Stroke of Laser Head (Y-Axis): 1550 mm Max. Stroke of Laser Head (Z-Axis): 300 mm Max. Cutting Speed X and Y Axis: 20 m/min. Speed Rapid Transport X: 80 m/min. Speed Rapid Transport Y: 80 m/min. Speed Rapid Transport Z: 60 m/min. Positioning Accuracy: ± 0.01 mm/500 mm Repeatability: ± 0.005 mm Table Height: 820 mm Part Door Dimensions: 550 x 1550 mm Power Supply Voltage: 200 V (± 10 %) AC Mains Frequency: 50/60 Hz (± 1 Hz) Installed Power: 10 kVA, 3 phases Compressed Air Supply (Cutting Gas): 1000 l/min. Compressed Air Supply (No Cutting Gas): 250 l/min. Dimensions (LxWxH): 2500 x 5654 x 2275 mm Type ,Numerical Control: FANUC FS-160iLA Controlled Axes: ,X, Y, Z (3 axes controlled simultaneously) Programming Method: ,3.5' floppy dis ...

Description: control: HPA 150 MF L, including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información

Description: including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información

Description: including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información

Description: including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información

Description: including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información

Description: including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información

Description: including control cabinet and balancerApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 250 kg ... más información