subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 109)
Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pump equipment ...
Unused 1 full pack with 16 plates 2000 mm x 1000 mm 6 mm thick Nett weight 1548kgs ... más información
Description: The used PMM-F is specially designed for testing medium-sized components and gears. This 3D measuring machine has an overhead design and serves as a coordinate measuring machine, gear measuring centre, form tester and roughness measuring machine. Area of application: Inspection of medium-sized components and gears Design: Overhead design Functions: Coordinate measuring machine, gear measuring centre, form tester, roughness measuring machine Measuring range: approx. 3,000 x 2,000 x 1,600 mm Resolution: 5 nm Equipment: Various measuring probes Accessories: Work table, mobile container, chair Control desk: Equipped with a Dell PC The PMM-F offers a precise and versatile solution for measuring and testing components and gears in medium dimensions.z-motion: 1,000 mm, x-motion: 3,000 mm, y-motion: 2,000 mm, table surface area l x w : 3000x2000 mm, weight approx.: 32,000 kg, Appr ...
honing diameter:41 mmstroke:800 mmweight:15.000 kgfloor space required (w/o switchgear cabinet):4x2x5 mnumber of spindles:2 Vertical honing machine from current OEM lineBore honing machine from wheel production Honing diameter: 41mm serial part4 layer honing tool Machine condition: o used and intact; fully functional; Serial system ratchet wheel 4 o Parts quality OK o 2 spindle vertical honing machine o 4-layer honing tool - Piece counter: 960,000 - The machine was used in three-shift operation Overview of accessories: o Control panel o Tool/ clamping device o oil panso Decentralized coolant system (2.5x1.5x1m), hydraulic unit (1.5x1x1m) & control cabinet
Swivel Wheels x 4 Single Wheels x 8 Excluding Box ... más información
Description: The almost new 8 MW transmission test station is operated from a central control station. Some of the test energy input can be fed back into the power network. Inventory number: 9000945 , Year of construction: 2018 Data on the three-phase asynchronous machines Nominal output: 7.7MW Maximum output: 8.47MW Nominal speed: 1150/min Maximum speed: 2200/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm Main shaft data Nominal speed: 8.99 rpm Nominal torque: 6000kNm Maximum torque: 8800kNm Cooling system Cooling capacity of the cooling tower: 900kW Coolant volume flow: 160m³/h at 4 bar and 30°C Nominal pressure hydraulics Hydraulic system main shaft: 250 bar at 100 l/min Hydraulic system quick coupling: 300 bar at 1 l/min Hydraulic system generator (lifting/lowering) 150 bar at 8 l/min Oil system: 8 bar at 120 l/min General data Operating voltage: 3.3kV Auxilia ...
workpiece diameter:360 mmcentre distance:600 mmturning speed range - stepless:2 - 1.550 U/mintransmission ratio:2 tailstock travel:800 mmpower maindrive:33 kW:160 kVAweight of the machine ca.:17 tprecision flow-forming machine with 2 rolls,slides with 2 roller under 90°,central lubrication,max. round blank dia. 380mm,bed length 3.670mmm,mainspindle speeds infinitely variable,hydr. roller drive, swivellable roller bearings,coolant device 800 l,only approx. 4.300 working hours
Description: laser source: fiber laser class: class IV wavelength: 1 062-1 066 nm max. average output power: 500W nominal pulse energy: 50-100 mJ (depending on mode) nominal pulse length: 30-100 ns (depending on mode) frequency: 5-50 kHz max. power input: 4,5 kW focusing optics: 254 mm (100, 160, 420 mm) power chain length: 9,4 m power supply: 3×400 V, 16 A, PE-N, standard five-pin cooling: distilled water, 5 l machine in good technical condition, after agreement possibility of testing weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,400 x 700 mm
Unused 1 full pack with 16 plates 2000 mm x 1000 mm 6 mm thick Nett weight 1536kgs ... más información
Extra rollers - lifting eyes available - loading options available - separate control panel ... más información
Description: machine number: 575158 control: Multipulse travels: X-axis: 550 mm Y-axis: 850 mm Z-axis: 450 mm table dimensions: 800 x 1100 mm max. table load: 2000 kg x-motion: 550 mm, y-motion: 850 mm, z-motion: 450 mm, control: Multipulse, table surface area l x w : 800x1100 mm, weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,650 x 2,800 mm
Description: Natural gas feeder Efficiency 9.9 kWh/m³ Consumption 35 m³/h Maximum temperature 800°C Maximum coil weight 3 tons Maximum coil diameter 1400 mm Maximum coil height 2000 mm Power 350 kW PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 2 exceptional transports 2 normal trucksApprox. Onsite Dimension. (l x w x h): 12,000 x 6,000 x 4,000 mm, weight approx.: 25,000 kg
Sulzer METCO Plasma Coating Plant for cylinder block and cylinder head, YOM 2002New price: ? 16-20 mio ... más información
stroke adjustment: 10-80mm; Drop-through hole size: 180 x 120mm ... más información
1010 VAR; 2.2 Phm; 230V; table dim. approx. 400x300 mm; incl. degaussing device ... más información
Description: The Rösler RHBE 15/20 is an overhead conveyor blast machine that is suitable for the surface treatment of heavy or large-volume workpieces. , General information Type: RHBE 15/20 Machine number: 42825/08 With air extraction and material recycling Technical specifications Machine type: Overhead conveyor blast machine Turbines: Gamma 300G Hook load: 500 kg Door opening approx.: 1500 x 2000 mm workpiece dimensions L/W/H: 2000x1500 mm, charge weight: approx. 500 kg, total power requirement: 62 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 5,000 x 6,000 mm, weight approx.: 5,000 kg