- (8)
- Centres de elaboración de rectificado (4)
- Centros de conformación y rotación (10)
- Centros de elaboración (159)
- Centros de elaboración de fresado (8)
- Centros de elaboración del perfil (2)
- Centros de elaboración horizontales (42)
- Centros de elaboración universal (68)
- Centros de elaboración verticales (120)
- Centros de mecanización especiales (1)
- Centros de mecanizado CNC (317)
- Centros de mecanizado CNC horizontales (59)
- Centros de mecanizado CNC verticales (169)
- Centros de mecanizado de alta velocidad (HSC) (5)
- Centros de mecanizado de herramientas (1)
- Centros de procesamiento de portales (8)
- Centros de taladrado (4)
- Centros de taladrado de alta velocidad (HSC) (1)
- Centros horizontales de taladrado y fresado para piezas cúbicas (3)
- Centros verticales de taladrado para piezas cúbicas (2)
- Fábricas de perforación de bandejas (13)
- Fábricas de perforación de bandejas para apoyar las mangas (8)
- Fresadoras de taladro (34)
- Fresadoras universal (1)
- Mandrinadoras (59)
- Mandrinadoras CNC (25)
- Máquinas de machos de roscar (23)
- Máquinas de perforación manual (54)
- Maquinas de perforación profunda (31)
- Máquinas de perforaciones de semillas (1)
- Máquinas de punteo (8)
- Máquinas de punzonar (3)
- Máquinas de taladro de huecos largos (1)
- Mesas giratorias redondas (5)
- Obras de perforación en coordenadas (8)
- Obras educativas en perforaciones (4)
- Otras taladradoras (10)
- Otros centros de mecanización (7)
- Taladradoras (79)
- Taladradoras a batería (6)
- Taladradoras automáticas (28)
- Taladradoras automáticas de tambor distribuidor (1)
- Taladradoras de columna (190)
- Taladradoras de mesa (58)
- Taladradoras de montante (69)
- Taladradoras de precisión (2)
- Taladradoras de punto de centrado (2)
- Taladradoras de sobremesa (64)
- Taladradoras de vias múltiples (2)
- Taladradoras en fila (20)
- Taladradoras especiales (1)
- Taladradoras magnéticas (2)
- Taladradoras multihusillo (32)
- Taladradoras para agujeros profundos (12)
- Taladradoras radiales (94)
- Taladradoras radiales rápidas (15)
- Taladradoras verticales (1)
- Taladradoras verticales de coordenadas (2)
- Taladradoras verticales de plantillas (2)
- Taladradoras-roscadoras (8)
- Taladro de núcleo (1)
- Talarados de alto rendimiento (4)
- Terraja automática (1)
- Tornillos portapieza (84)
- más
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (27)
- ACME (1)
- ADRIASTROJ (1)
- AEG (5)
- AFD (1)
- AGFA (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (3)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESAMONTI (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (11)
- Alzmetall (127)
- AMADA (1)
- ANAYAK (2)
- ANGER (1)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES SEIKI (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNO (2)
- ASDORF (1)
- ASQUITH (1)
- ATOLL (1)
- AUDAX (1)
- Auerbach (4)
- Avia (5)
- Awea (9)
- AXA (19)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (1)
- AYEL-TECH (2)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKER (1)
- BECKHOFF (1)
- BEMATO (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (19)
- BERNHARD STEINEL (1)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (2)
- BOLEY (1)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BRAGONZI (1)
- BREDA (5)
- BREVETTI MOTTA (1)
- BRIDGEPORT (17)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BRONSWERK (1)
- BROTHER (14)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (4)
- BWF (1)
- BÖHRER (2)
- C.B. Ferrari (2)
- ... más
Fabricante:
(Categoría: 101)
Año de construcción: 2014
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2015
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2015
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 1990
usado
This is a special machine for the machining of ball bearing slewing ring supports, controls: Siemens SINUMERIK 810M, with documentation, one circuit board is defective. ... más información
Año de construcción: 1989
usado
X-travel: 2x 500/ 1600mm, y-travel: 300mm, z-travel: 250mm, controls: Heidenhain TNC 355, with documentation, accessories available, was maintained regularly, an inspection is possible. ... más información
Año de construcción: 2006
usado
X-travel: 2500mm, y-travel: 920mm, z-travel: 820mm, max. rotational speed: 18,000/min, spindle holder: SK40, number of tool places: 30, connected load: 96kVA, controls: Heidenhain iTNC 530m, weight: 25t, operating/spindle hours: 118,712/ 10,654h, with documentation, without tools, has been serviced regularly, an on-site inspection is possible.
Año de construcción: 2000
usado
x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC control Heidenhain TNC426- swivable milling head (horizontal / vertical)- NC-rotary table (C-axis)- tool changer for 32 tools- chip conveyor- electronical hand wheel- coolant device (coolant through spindle device 20bar)Technische Daten / technical details:Verfahrweg X längs / X-Travel longitudinal 1200 mmVerfahrweg Y quer / Y-Travel cross 600 mmVerfahrweg Z vertikal / Z-Travel vertical 700 mmC-Achse Rundtisch / C-axis rotary table 360 °Fräskopf / milling head +-90 °Rundtischgröße / rotary table size 800 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 32 fachAntriebsleistung Spindel ...
Año de construcción: 2005
usado
X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024.
Año de construcción: 2007
usado
Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.
usado
Stroke: 780mm, rotational speed: 30-1700/min. ... más información
usado
Connected load: 5kW, weight: 3t. ... más información
Año de construcción: 1951
usado
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm. ... más información
usado
Rotational speed: 37-1900/min, an inspection is possible. ... más información
Año de construcción: 2009
usado
X-axis: 1100mm, y-axis: 610mm, z-axis: 610mm, max. milling spindle speed: 6000/min, control: Siemens 840D SolutionLine, operating hours: 40,964h, with tool holders, hydraulic vices, electromagnetic device, further accessories and documentation, without tools and tool cabinet, a roll end milling cutter is also available, on-site inspection is possible.
Año de construcción: 1998
usado
X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible. ... más información
Año de construcción: 2006
usado
X-travel: 800mm, y-travel: 800mm, z-travel: 800mm, max. rotational speed: 18,000/min, number of tool positions: 240, number of pallets: 45, rotary table dimensions: 900x700mm, control: Heidenhain iTNC 530, operating/spindle hours: 182,249/ 116. 336h, with tool storage, pallet automation, chip conveyor, handling robot, collision protection Branenkamp, loading crane, zero-point clamping system, accuracy package, automatic swivel milling head, horizontal tool changing device, double gripper, 240 magazine positions HSK 63, NC rotary table, coolant tank 900l, IKZ 80bar through spindle center (AD), chip conveyor, rotating inspection window, 3D path control, was regularly maintained by the manufacturer, on-site inspection is possible.
Año de construcción: 2002
usado
X-travel: 1020mm, y-travel: 560mm, z-travel: 600mm, table dimensions: 100x560mm, max. table load: 1.35t, weight: 6.5t, connected load: 42kW, controls: Heidenhain 426, an on-site inspection is possible. ... más información
Año de construcción: 2020
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2007
usado
X-travel: 1300mm, y-travel: 710mm, z-travel: 710mm, table height: 710mm, table dimensions: 1500x660mm, table height: 880mm, max. workpiece weight: 1.2t, length: 3400mmm, width: 3240mm, height: 3000mm, weight: 5.5t, with tools, has been regularly serviced, on-site inspection is possible. ... más información
usado
Control: Heidenhain TNC 430M, connected load: 30kVA, operating hours: 27,879h, the machine is heavily used, X- and Y-axis need to be overhauled, the motor of the Z-axis is defective, an on-site inspection is possible. ... más información