subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:830|1080|1330|1580 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine ...
turning diameter:810/680 mmturning length:2.500 mmcentre distance:3.040 mmswing diameter over bed slide:530 mmspindle bore:145 mmturning speed range:10 - 2.000 1/minspindle drive:76 / 63 kWturret (x-stations):12 Pos.tool taper:VDI 60 Torque:1150 / 4005 Nmrapid travel range:X12 / Z12 m/minmax. workpiece weight between centers:4.000 kgmax. workpiece weight -without tailstock:630 kgtotal power requirement:140 kVAweight of the machine ca.:17,6 tdimensions of the machine ca.:7,7 x 2,85 x 2,7 mCNC-lathe with tailstock - live tools 12 / 8 kW (85 / 105Nm),- spindle 2,5° indexing,- steady 50 -200mm,- hydr. 3-jaw-chuck,- chipconveyor, coolant device,- tailstock,tailstock quill:- MT 5,- dia. 160mm,- stroke 285mm,
Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h. ... más información
turning diameter:2000 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:1640 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine width/height:2500 x 2400 mmmax. workpiece weight between centres:900 ...
Swing over bed/ slide: 400/ 190mm, center height: 220mm, center distance: 1000mm, bed width: 330mm, with documentation. ... más información
Number of axes: 3, max. turning range: 350mm, turning length: 515mm, max. spindle speed: 8000/min, max. bar diameter: 34mm, spindle power: 11kW, control: M730UM with CELOS ERGOline Touch control panel for networking with CAD/CAM and MAPPS system, operating hours: 12,573h, including 3x external turning holder, 3x boring bar holder, 1x angular offset AGW, 1x axial AGW, 1x spindle insert tube, collet chuck for the main spindle, jaw chuck for the counter chucks, documentation, main and counter spindle with integrated motor spindle and increased speed, can be inspected on site.
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... más información
:KTH 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-8/A2-11/A2-15/A2-20 spindle speeds:0-1400/0-1000/0-750/0-560 1/min.spindle bore:130/155/230/310 mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:22 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2190 x 2315 mmautomatic tool changer:8-fach CNC controller:Siemens/Fanuc/Fagor tools:1 Satz CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents
bar material dia.:51 mmturning length:644 mmturning dia. over bed:600 mmturning diameter over slide:430 mmy-axis:100 (+-50) mmturning speeds:2x 5.000 1/minpositive location each:2x C-Achse, 0,001° GradSub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos.driven tools:2x 12 Pos.turning speeds:2x 4.000 1/mincontrol:FANUC 18 iTB total power requirement:30 kVAweight of the machine ca.:8 tdimensions of the machine ca.:3,5 x 2,5 x 2,3 mturning- milling center with Y-axis,collet device on main and subspindle,high pressure pumps 2x 14bar,parts catcher/conveyor,barloader ENTL 10-65,chip conveyor,lot of accessoriesapprox. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"
Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. ... más información
:KTH 400 | KTH 500 turning diameter:805 | 1010 mmturning length:1000/2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mmbed width:425 | 500 mmspindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:106 | 120 mmtailstock quill stroke:215 | 300 mmtaper of tailstock quill:6 MKpower requirement:17 | 22 kWautomatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents
Swing over bed/ plane: 600/ 420mm, max. turning length: 829mm, quill stroke: 120mm, weight: 9.6t, including chip conveyor, machine needs overhauling. ... más información
:JAP 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASAspindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min.spindle bore:130 (opt. 155,230,310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:17 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm:gem. 8605 DINautomatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CNC controls from: ...
Center distance: 600mm, max. rotational speed: 2000/min. ... más información
turning diameter over bed:42 mmturning diameter over longitudinal slide:42 mmturning length:110 mmcontrol:FANUC 31 i model B spindle speed::25 - 6000 1/minspindle:5,5 / 7,5 kWspindle hollow:42 mmtotal power requirement:25 kVAweight:3,3 tspace requirements approx. LxWxH:2,95 x 1,55 x 2,15 mCNC-lathe, NEW , from showroomwe have 4 new machines in our stockCNC long center lathe with moved spindle and subspindleprepaired for bar loader up to 42 nmm 7 axis ( X Z Y C Z2 X2 C2 ) 5 pcs. toolholder 20 x 20 mm5 pcs. drill holder4 pcs. driven tools , max. 6.000 rpm4 pcs. driven tools from backside , max 5.000 rpm swarf conveyer,high pressure cooling systemhollow clamping device,eletr. handwheelhydraulic hollow clamping cylinder front- and backsideclamping system on both sides Hainbuch SK 52 0 h "machine on", 0 h "spindle on" !
Software: Eltro Pilot, controls: Heidenhain Turn Plus (EP90) 1190 V4.6, spindle hours counter: 45,288h, including accessories. Pictures upon request. ... más información
turning diameter over bed:530 mmturning diameter over slide rest:320 mmturning length:2000 mmcenter height over bed:275 mmspeeds:18 - 1600 U/minspindle bore:60 mmbed width:430 mmengine output:17 kWweight:2700 kgspindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m- 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder- workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets
There are three EMAG VCS 200 available, connected load: 36kW, without tools, with documentation, were maintained regularly. ... más información