subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... más información
Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... más información
Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... más información
Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site. ... más información
CONTROLS CNC controls FANUC 18 T BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 700 mm turning diameter (max): 700 mmMAIN SPINDLE spindle revolutions (max): 3500 /min spindle bore diameter: 91 mm c-axis: yes COUNTER SPINDLE Z-axis travel: 1105 mmX/Z SLIDE X-axis travel: 362 mm tool fixture: Turret number of tool positions (total): 12 TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4820 mm space requirements -front/back-: 3200 mm total height: 2300 mm &n ...
Number of axes: 3, max. turning range: 350mm, turning length: 515mm, max. spindle speed: 8000/min, max. bar diameter: 34mm, spindle power: 11kW, control: M730UM with CELOS ERGOline Touch control panel for networking with CAD/CAM and MAPPS system, operating hours: 12,573h, including 3x external turning holder, 3x boring bar holder, 1x angular offset AGW, 1x axial AGW, 1x spindle insert tube, collet chuck for the main spindle, jaw chuck for the counter chucks, documentation, main and counter spindle with integrated motor spindle and increased speed, can be inspected on site.
CONTROLS CNC Teach In Controls NUM 1062 BASIC FUNCTIONS number of x/z slides: 1 live positions: no WORKING RANGE TURNING swing diameter (max): 570 mm turning diameter (max): 365 mm worpiece length max.: 1000 mmMAIN SPINDLE spindle revolutions (min): 3 /min spindle revolutions (max): 2500 /min number of gears: 2 spindle diameter: 62 mmX/Z SLIDE traverse velocity Z (min): 0 mm/min traverse velocity Z (max): 10000 mm/min traverse velocity X (min): 0 mm/min traverse velocity X (max): 5000 mm/min tool fixture: Steel Holder TAILSTOCK taper: MK 5 ELECTRICAL SPECIFICATIONS mains power supply: 35 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space require ...
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... más información