subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.
Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible. ... más información
Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible. ... más información
Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible. ... más información
CONTROLS CNC Teach In Controls NUM 1062 BASIC FUNCTIONS number of x/z slides: 1 live positions: no WORKING RANGE TURNING swing diameter (max): 570 mm turning diameter (max): 365 mm worpiece length max.: 1000 mmMAIN SPINDLE spindle revolutions (min): 3 /min spindle revolutions (max): 2500 /min number of gears: 2 spindle diameter: 62 mmX/Z SLIDE traverse velocity Z (min): 0 mm/min traverse velocity Z (max): 10000 mm/min traverse velocity X (min): 0 mm/min traverse velocity X (max): 5000 mm/min tool fixture: Steel Holder TAILSTOCK taper: MK 5 ELECTRICAL SPECIFICATIONS mains power supply: 35 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space require ...
Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site. ... más información
CONTROLS CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 420 mm worpiece length max.: 1130 mmMAIN SPINDLE spindle revolutions (min): 10 /min spindle revolutions (max): 3000 /min spindle bore diameter: 51 mmTAILSTOCK sleeve stroke: 110 mm sleeve diameter: 70 mm taper: MK 4 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3500 mm space requirements -front/back-: 1500 mm total height: 1800 mm total weight approx.: 3500 kgMachine rarely usedFurnishing:- 3 jaw chuck D210- 4 compartments ready change holder
Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... más información
CONTROLS CNC controls FANUC 18 T BASIC FUNCTIONS number of spindles: 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 700 mm turning diameter (max): 700 mmMAIN SPINDLE spindle revolutions (max): 3500 /min spindle bore diameter: 91 mm c-axis: yes COUNTER SPINDLE Z-axis travel: 1105 mmX/Z SLIDE X-axis travel: 362 mm tool fixture: Turret number of tool positions (total): 12 TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4820 mm space requirements -front/back-: 3200 mm total height: 2300 mm &n ...
There are two Boley BE42 available, max. machining diameter: 42mm, max machining length: 120mm, max speed main/ counter spindle 8000/ 6000/min, control: Mitsubishi Meldas 635 LCC, weight: 3,3t, operating hours machine 1/ 2: 60.787/42. 200h, including bar feeder, two 12-fold tool turrets with intermediate indexing and driven tools, holder VDI 20, full counter spindle with X- and Z-axis, C-axis spindle 1, C-axis spindle 2, mechanical spindle indexing 15° spindle 2, collet holders spindle 1 and 2, workpiece removal device, milling interpolation, constant cutting speed, synchronous tapping without extractor holder, bar loader Iemca Boss 545, chip conveyor, high-pressure cooling, fire extinguishing system, further collets, tool holders and accessories are available, inspection is possible.
CONTROLS CNC Teach In Controls SIEMENS BASIC FUNCTIONS design principle: flatbed number of spindles: 1 WORKING RANGE TURNING swing diameter (max): 720 mm turning diameter (max): 380 mm bar diameter (max): 108 mm worpiece length max.: 1500 mmMAIN SPINDLE spindle revolutions (min): 0 /min spindle revolutions (max): 1200 /min number of gears: 3 spindle bore diameter: 108 mmX/Z SLIDE traverse velocity Z (max): 5000 mm/min traverse velocity X (max): 5000 mm/min rapid traverse Z: 5000 mm/min rapid traverse X: 5000 mm/min tool fixture: Steel Holder TAILSTOCK distance betw. centers (max): 1500 mm sleeve stroke: 200 mm sleeve diameter: 120 mm taper: MK 6 ELECTRICAL SPECIFICATI ...
A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... más información