- (27)
- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (36)
- Bancos de postgiro (3)
- Camas inclinadas CNC (2)
- Centros de torneado CNC (159)
- Centros de torneado horizontal (20)
- Centros de torneado verticales (5)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (9)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (176)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (13)
- Tornos cíclicos (38)
- Tornos cíclicos CNC (45)
- Tornos CNC (483)
- Tornos con husillo de cilindrar y roscar (286)
- Tornos de barras (6)
- Tornos de doble husillo CNC (13)
- Tornos de husillos excavados (1)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (61)
- Tornos de plato horizontal CNC (35)
- Tornos de precisión (5)
- Tornos de puntas (3)
- Tornos de refrentar (15)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (1)
- Tornos especiales (2)
- Tornos horizontales (5)
- Tornos para mecánicos (25)
- Tornos pesados (26)
- Tornos revólver (4)
- Tornos universales (31)
- Tornos universales de Ø más de 800 mm (8)
- Tornos universales hasta Ø 800 mm (12)
- Tornos verticales (76)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (3)
- Tronzadoras (8)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (2)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (2)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (23)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (18)
- BOEHRINGER MAZA (1)
- BOLEY (6)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (34)
- CAZENUEVE (1)
- CEGIELSKI (1)
- CELORIA (1)
- Chevalier (3)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINNCINATI (1)
- Citizen (34)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (16)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (55)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (14)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAINICHI (2)
- DALIAN (1)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- Diedesheim (2)
- Dimitrov (2)
- DINN SPINNING LATHE (1)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
usado
turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:80 mmtotal power requirement:1,0 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,7 x 0,6 x 1,2 mfacing lathe with manual feed, various accessories ... más información
Año de construcción: 1996
usado
Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. ... más información
Año de construcción: 1979
usado
With multi-fix holders size C, ACU Rite position indicator, rapid traverse in X and Z axis, three-jaw lathe chuck Forkardt F315, without documentation, an on-site inspection is possible. ... más información
Año de construcción: 2004
usado
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2005
usado
Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024. ... más información
Año de construcción: 2004
usado
The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.
Año de construcción: 1997
usado
X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.
Año de construcción: 2006
usado
turning diameter:920 mmturning length:2034 mmx-axis:1025 mmy-axis:650 mmz-axis:2106 mmb-axis:240 °c-axis:360.000 x 0,001 °w-axis:2032 mmrapid traverse::40 m/minspindle turning speed range:1 - 1600 U/mintool taper:CAPTO C8work piece power:37 kWspeeds of tool:1 - 10000 U/minSpindle bore:170 mmtotal power requirement:125 kVAdimensions of the machine ca.:8,5 x 3,2 x 3,9 mweight of the machine ca.:26,5 tMachine with MAZAK Matric CNC control- 2 spindle boxes with C-axis and W-axis for right hand spindle- 2 power chucks 650 mm dia. Kitagawa- tool changer for 80 tools- Renishaw probe tester- hand operating panel- milling head with B- and Y axis- spindle changed in 10/21, last service in 12/23- coolant through spindle- splash housing, chip conveyor
Año de construcción: 1975
usado
turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system
Año de construcción: 2002
usado
Turning length: 300mm, turning diameter over bed: 200mm, control: Siemens Sinumerik, with documentation, cooling lubricant system and chip conveyor, the machine has only rarely been in operation for approx. 2.5 years, an on-site inspection is possible. ... más información
Año de construcción: 2002
usado
Max. bar diameter: 32mm, max. rotational speed: 8000/min, connected load: 42kVA, control: Siemens 840D, weight: 5.5t, operating/spindle hours: 67,086/53,283h, with bar loader FMB turbo 5-42, inspection is possible, both turrets of the machine have no y-axis. ... más información
Año de construcción: 1994
usado
faceplate diameter:1400 mmswing diameter:1600 mmturning height:1000 mmfaceplate turning speed range -stepless-:1 - 250 U/minmax. horizontal adjustment of cross-rail sup.:950 mmmax. adjustment of vertical turret slide:700 mmmax. vertical adjustment of side-support:1000 mmmax. horizontal adjustment of side-support:630 mmadjustment of cross-rail:660 mmadjustment speed of cross-rail:400 mm/minmax. workpiece weight:6300 kgfeed per revolution:0,025 - 10 mm/Upower capacity:56 kWweight of the machine ca.:21,5 tdimensions of the machine ca.:3 x 4,2 x 4,2 mwith 2-axes digital readout5-station turret headside headV-constant cutting speed
Año de construcción: 2000
usado
X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.
Año de construcción: 2001
usado
turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories
Año de construcción: 1956
usado
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
Año de construcción: 1972
usado
Año de construcción: 1987
usado
Año de construcción: 1977
usado
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información
Año de construcción: 1996
usado
Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.
Año de construcción: 1994
usado
Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.