- Achaflanadoras para el corte de los bordes de soldadura (3)
- Alrededor de máquinas de soldadura (1)
- Aparatos de soldadura (40)
- Aparatos de soldadura de electrodos (24)
- Aparatos de soldadura de pernos (1)
- Bancos de soldadura (58)
- Canteadoras para soldadura (5)
- Cargadores de máquinas de soldadura (3)
- Cortadoras por rayos láser (22)
- Dispositivos de separación de tuberías (1)
- Elementos calefactores (1)
- Equipos de soldadura de gas inerte (7)
- Gas mezcla hidrógeno nitrógeno (1)
- Giro del soporte para contenedor (4)
- Instalaciones de corte al chorro por plasma (33)
- Instalaciones de soldadura (15)
- Instalaciones giratorias para recipientes de motor (8)
- Instalaciones móviles de filtración de humos de soldadura (1)
- Máquinas de corte de tubos (1)
- Máquinas de corte por ultrasonidos (1)
- Máquinas de soldadura (26)
- Máquinas de soldadura de costuras (1)
- Máquinas de soldadura de pernos (3)
- Máquinas de soldadura de plasma (1)
- Máquinas de soldadura de puntadas largas (1)
- Máquinas de soldadura de quemado (8)
- Máquinas de soldadura de resisitencias (7)
- Máquinas de soldadura electrica (8)
- Máquinas de soldadura especial (3)
- Máquinas de soldadura lisa (10)
- Máquinas para soldadura de tuberías (2)
- Máquinas para soldar por resaltes (3)
- Máquinas soldadoras por láser (6)
- Mesas giratorias de inclinación de soldadura (16)
- Mesas giratorias de soldadura (26)
- MIG MAG Aparato de soldadutra de gas de protección (118)
- Plantas para la soldadura con laser (7)
- Robots de soldadura células (11)
- Robots de soldar (23)
- Sistemas de robot de soldar (2)
- Sistemas de ventilación de escape del humo de soldar (13)
- Soldadoras de arco (1)
- Soldadoras de malla de alambre (6)
- Soldadoras por frotamiento (4)
- Soldadoras por puntos (59)
- Soldadoras ultrasónicas (1)
- Sopletes para corte de metales (1)
- Tractores de soldadura magnética (1)
- Transformadores (2)
- más
- AARDING (1)
- ABB (9)
- ABITIG (2)
- Air Liquide (2)
- AK BEND (1)
- AK-BEND (4)
- AKYAPAK (4)
- ALFRED KOHLER (1)
- ALLOY (1)
- ALME GERIMA (1)
- ALPHA LASER (2)
- Alphaforce (2)
- Alphaweld (2)
- ALU (1)
- AMADA (1)
- APS (2)
- Arcair (2)
- Arcos (3)
- ARNHOLD (1)
- ARO (11)
- ARO // Wende (4)
- ARO//Wende (4)
- ART WELDING (1)
- ART-WOS (1)
- Artec (2)
- ARTEC THREEWELD (1)
- ATF (1)
- AUER (1)
- Avesta (8)
- AWS (1)
- BAC CAINSDORF (1)
- BACH (1)
- BDS Maschinen (2)
- BECK (1)
- BENDMAK (1)
- BEWO (1)
- Bihler (2)
- Binzel (10)
- BLM ADIGE (1)
- BOeHLER (3)
- BOLDRINI (1)
- BOSCH (1)
- BROWN BOVERI (1)
- Bystronic (15)
- Böhler (31)
- Böhler Thyssen (3)
- Castolin (2)
- CASTOLIN - EUTECTIC (1)
- Castolin Eutectic (7)
- CEBORA (5)
- CENTROMAT (1)
- CEVISA (1)
- CLOOS (14)
- COMMERCY SOUDURE (1)
- CONTI-WELD (1)
- Copper (4)
- CR ELECTRONIC (1)
- CSEPEL (1)
- DALEX (44)
- DAPENG (1)
- DELTATHERM (1)
- DEUMA (5)
- DEUMA-HEITZE (1)
- Dinse (23)
- DOMINO (1)
- DRA TEC (2)
- DRATEC (3)
- DREHTISCH (1)
- DRESS WERKZEUGE (1)
- DRäGER (1)
- DUMETA (56)
- DYNAMIC POWER LASER (1)
- DÜRING (1)
- E-TECH TRUMPF (1)
- ECO CRANES (1)
- EDECO (1)
- EG (1)
- Elga (11)
- ELGACORE (1)
- ELMA-TECH (1)
- Elmatech (4)
- ELMEATECH (1)
- ELUMATEC (2)
- EMA (1)
- EMW (1)
- EP Systems (2)
- EP-Systems (2)
- EPDM (2)
- ERGOPLUS (1)
- ERHA (1)
- Ermaksan (2)
- ESAB (48)
- ESAB Retrofit 2009 (2)
- ESAB-PEMA (1)
- ESFA (1)
- ESS (26)
- EST-DRESDEN (1)
- ESTA (3)
- ETA (4)
- EUEN (2)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 108)
Año de construcción: 2007
usado
Max. Laser power: 400W, operating hours: 28. 200h, with WinLas laser programming software, storage option for 99 laser programmes Optical setup for one laser light cable with fast switch (50ms switching time), optical setup can be extended to a maximum of 4 laser light cables, pilot laser with plasma sensor holder, Control of the pilot laser via laser operating software, beam guidance and shaping, LLK-B 06 laser light cable, length 40m, fibre diameter 600mm, suitable for robots, BEO 7000210p processing optics for laser welding, lens with focal length 200mm, Protective glass cassette for easy replacement of the protective glass, collimation 0° with defocussing and observation by camera, CCD camera, b/w monitor, adjustable crosshairs, camera supply cable, 30m long, and BNC video cable, 10m long, optics protection by Laval Crossjet, Design of the robot cell with suspended robot, KUKA KR 30 ...
Año de construcción: 2016
usado
Number of axes: 6, reach: 3500mm, max. load: 15kg, weight: 220kg, includes welding robot system, additional torch, 2x welding station with turning device, 1x welding station with Demmler table, 1x Cloos QINEO Champ 450 welding machine, has been regularly serviced, on-site inspection is possible. ... más información
Año de construcción: 2003
usado
There are two identical lasers LASAG AG OS SLAB, pulse duration: 0.1-0.5ms, wavelength: 1064nm, max. laser radiation: 1mW, year of construction laser 1/ 2: 2002/ 2003. ... más información
Año de construcción: 2007
usado
Sheet thickness: 1.25-15mm, laser power: 3500W, operating hours: 54,839h, with laser source ROFIN DC 035, without extraction unit and without software, if a nesting software is available it can be integrated, can also be from another manufacturer. ... más información
Año de construcción: 2012
usado
The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition. ... más información
Año de construcción: 2000
usado
Track width: 3100mm, connected load: 2.8kVA, with power source Hyperterm HD 3070 and spare parts, without documentation, sheet metal storage is available, on-site inspection is possible. ... más información
Año de construcción: 2008
usado
X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.
Año de construcción: 2005
usado
Table dimensions: 2000x4000mm, max. stainless steel/ steel thickness: 20/ 25mmm, fuel: oxygen, propane, controls: CNC-801, with documentation and plasma power source Powermax 1650, the extraction needs overhauling. ... más información
Año de construcción: 2011
usado
Max. workpiece dimensions: 1500x300mm, laser power: 3kW, max. load: 5t, operational hours counter: 5364h, with loading table, suction units for removing the sheets from the loading trolley, configuration ADL30-PMC30-TLE30 155C L5-30ASF, unloading trolley, enclosure, pallet storage rack, workbench, storage table, chip trolley and documentation, an inspection is possible, was maintained regularly.
Año de construcción: 1990
usado
With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. ... más información
usado
Max. Plate dimensions: 2400x2100mm, table dimensions: 4100x3600x1450mm, water jet nozzles: 0.12/0.15/0.17/0.20/0.25mm, with documentation, 3D cutting head, drives, software, tools, spare parts package, and high pressure pump UHDE HPS 4022, multifunctional CAM cutting system with high precision, without abrasives, 3D 5-axis cutting head for flat cutting of different materials up to 45° bevel, with cutting nozzle make Allfi III/V, electrical height adjustment of the nozzle up to 200mm, for different material heights, dynamic servo drives for 90m/min, acceleration up to 70 m/s², machine frame in truss construction made of aluminum, cutting bridge, stainless steel water collection tray with water drain, stainless steel honeycomb elements as cutting table support, PC-based NC control Expert-PC and TFT monitor, cutting table, housing and hold-down device, on-site inspection is possible.
Año de construcción: 2004
usado
Welding capacity: 504kVA, connected load: 90-125kVA, weight: 588kg, without cooling unit, on-site inspection is possible. ... más información
usado
Length: 1500mm, width: 1300mm, height: 1500mm, weight: 350kg, including electrodes and cooling unit, without documentation, an on-site inspection is possible. ... más información
Año de construcción: 2011
usado
X-travel: 800mm, y-travel: 500mm, z-travel: 400mm, working height: 980mm, turntable diameter: 900mm, connected load: 12.5kW, control: Siemens Sinumerik 840D, length: 2710mm, width: 1815mm, height: 2645mm, weight: 1.86t, weight control cabinet: 300kg, with documentation, an on-site inspection is possible.
Año de construcción: 2010
usado
Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. ... más información
Año de construcción: 2010
usado
Cutting area: 3000x1500mm, laser power: 2kW, operating/ cutting hours: 30,153/ 7594h, with automation ByTrans Extended 3015, second cassette, storage tower Bystronic ByTower, number of compartments: 11, on-site inspection is possible. ... más información
Año de construcción: 2000
usado
Electrode force: 900daN, length: 1500mm, width: 1200mm, height: 1800mm, weight: 720kg, on-site inspection is possible, with refrigeration unit, tools and documentation, has been regularly serviced. ... más información
Año de construcción: 2002
usado
X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation. ... más información
Año de construcción: 2022
usado
Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. ... más información
usado
Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.