Fabricante:
(Categoría: 101)
Speed in 2 steps : 1 = 30 - 200 rpm. 2 = 200 - 1100 rpm. Feed: 0.1 - 0.4 mm/rev Tool holder: MK5 ... más información
Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg ... más información
Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...
core drilling diameter max.: 50-355 mmbore depth: 4000 mmswing diameter: 1000 mmcentre height: 500 mmfull boring: 18-100 mmmain spindle bore: 163 mmturning speeds: 56-710 U/minworkpiece weight: 6,3/10 tTailstock: 70-600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDrill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Lifting height: up to 2750 mm Load capacity: 1500 kg Fork length: 1150 mmApprox. Onsite Dimension. (l x w x h): 3,000 x 1,100 x 2,000 mm, weight approx.: 3,000 kg ... más información
Saling drill BLUTHARDT in robust performance, drilling capacity 50 mm, holder Mk 4 ... más información
conventional ´ traditional Tischbohrwerk, work spindle diameter 85 mm Traverse paths x 1000 mm, y 1000 mm, z 900 mm, ISO 40,. Clamping area table 1000 x 1120 mm with position indicator ... más información
Webo BR 35 V / 1250 radial drilling machine incl. Peiseler reversible clamp Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.
The machine is in good technical condition. Working spindle diameter: 90mm Transverse table adjustment: 1120mm accessories for the machine include a column crane A tour is possible by prior arrangement. ... más información
spindle diameter: 180 mmx-travel: 8000 mmy-travel: 4000 mmControl: Siemens type: Sinumerik System 3 ram: horizontal adjustment: 800 mmSpindle travel W-axis: 1400 mmram: diameter: 220 mmengine output: 75 kWturning speeds: 900 U/minPlate area: 8000x6000 mmangular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0 bore depth: 10000 mmnumber of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mmswing diameter over bed slide: 1600 mmboring diameter: 50 - 310 mmcentre height: 800 mmspeeds:: 2,5 - 400 total power requirement: 74 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg ... más información
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm ... más información
bore capacity in steel (diameter): 50,0 mmarm length: 1.350 mmworkpiece height max.: 1630 mmturning speeds: 19 - 1320 U/minbore spindles - Morse Taper: 5 MKengine output: 5,5 kWweight: 5 trange L-W-H: 2,4 x 1,0 x 3,55 mmfeed movement: 475 mmfloor plate size:: 1650x1000 mmfeeds: 0,07-2,9 mm/UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mmx-travel: 2000 mmy-travel: 1400 mmz-travel: 1400 mmspindle taper ISO: 50 table surface area: 1000x800 mmtable load: 12 tnumber of spindle speeds: 8-1650 U/mindigital readout: total power requirement: 12 kWweight of the machine ca.: 9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment
I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)
bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mmy-travel: 2000 mmz-travel: 1400 mmspindle stroke: 1000 mmturning speeds: 5-800 U/minRadial face slide: 700 mmRadial face slide: 2,2-115 U/minspindle taper ISO: 50 table surface area: 2000x1800 mmTable load: 14000 kgtotal power requirement: 42 kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 6,3x5x4,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t