fresadoras usadas para la venta

Anzahl Achsen: 3, rotational speed: 450-2800/min, connected load: 6kW, weight: 2t, including accessories and documentation. ... más información

x-travel: 800 mmy-travel: 450 mmz-travel: 400 mmtable surface area: 1385 x 305 mmspindle taper: SK 40 quill stroke: 200 mmspindle turning speed range: 50 - 3500 U/mincontrol: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kWweight of the machine ca.: 2,5 tdimensions: 2,25 x 2,0 x 2,4 mAccessories: electron. handwheeel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmspindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/mintransmission ratio: 18 feed range: 0,1 - 2000 mm/minrapid traverse: x = 4 / y = 3 / z = 5 m/mintable load capacity: 250 kpvoltage: 380 V / 50 Hzspindle drive: 5,5 kWtotal power requirement: 16 kVAweight of the machine ca.: 2,6 tdimensions of the machine ca.: 3,8 x 4,3 x 2,0 m• CNC-control system 432 E• Operating hours: 37719The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg

Tool-fraes machine Ruhla with very extensive trailer to be seen in top condition under electricity Type FUW Built in 1986 Tool holder SK40 stepless feed control Speed control via gearbox Weight approx. 1,800kg Accessories: Box table Quick-aeuferkopf with collet holder and collet set Fine drilling head with collet holder horizontal sub-apparatus universal sub-device SK40 with spiral-fraes device (probably unused) D2evxjf Counter-holder for horizontal fraes long fray edhism 2 stueck Further accessories at an additional cost. Special price

: gebraucht : 1986 : 4545 : prompt, Zwischenverkauf v : Österreich : 8400 €: 1 : 80 - 2200 (8) U/min: DIN2078 ISO30 (Anzugsschr : 300 x 200 x 350 mm: 600 x 200 mm: 1250 mm: 1350 mm: 1550 mm: 450 kg: 1200 mm/min.: 45 mm: 1600 Nm: 1,1/1,4 kW: 600 x 200 mm: 20 - 370 mm: 84 - 434 mm: 20 - 200 mm/mincoolant equipmentmachine lamp11 Pc. Milling arborsmachine feetSwivelling vertical milling head (+/- 90°) with extendable spindle sleeveHorziontal milling spindleUser Manual in GermanDOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x/y/z = 500/360/400 mm, max. 4000 rpm,4 clamping corner, 1 pushbutton, various shots, cabinet Lista  ... más información

X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, feed rate: 2-3600/min, rapid traverse: 4000mm/min, including documentation, without spare parts, gear for speed under 500/min is defective and the milling spindle is losing oil. ... más información

x-travel: 500 mmy-travel: 360 mmz-travel: 400 mmControl: Siemens 810 tool taper: SK 40 table surface area: 800x390 mmT-slot - width: 14H7 mmnumber of T-slots: 6 T-slot - distance: 63 mmturning speeds: 20-4000 U/mintransmission ratio: 4 Feed: 1-2000 mm/minrapid traverse: 5 m/mintotal power requirement: 9 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,5x2,9x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg  ... más información

Manufacturer: Lid Type: FP 5 CC Year of construction: approx. 1986 Table: 1500 x 675 mm Longitudinal path: (X,Y,Z axis) 1200x600x500mm Tool changer: no Tool holder: SK 40 Vertical spindle speeds: 20-6300rpm Feeds: 2-5000mm/min Connection: 50 Hz 3x 380V Spindle motor: 7.5KW Machine weight: approx. 8200kg Dimensions: 3300x2400x2400mm

X-travel: 800mm, y-travel: 450mm, z-travel: 500mm, quill stroke: 80mm, rotational speed: 63-3150/min, length: 4500mm, width: 3800mm, height: 2030mm, weight: 3.8t, operational hours counter: 2538h, including accessories and documentation, was maintained regularly. ... más información

x-travel: 400 mmy-travel: 400 mmz-travel: 400 mmcontrol: Grundig Contour tool taper: SK40 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-axes digital read outhorizontal and vertical milling spindlequillTechnische Daten / technical details:Längsweg X / X-travel longitudinal 500 mmQuerweg Y / Y-travel cross 400 mmSenkrechtweg Z / Z-travel vertical 400 mmTischgröße / table size 800x460 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpmVorschubbereich / feed range 8-630 mm/min.Antriebsleistung Frässpindel / power capacity milling spindle 4,4 kWGewicht der Maschine / weight 1500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solu ...

x-travel: 1500 mmy-travel: 600 mmz-travel: 450 mmControl: Heidenhain TNC 155 total power requirement: 28,4 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 720 mmy-travel: 200 mmz-travel: 350 mmtool adaptor: SK40 : max. 1.400 U/minquill stroke: mm: weight of the machine ca.: 3,2 t: : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmspindle taper ISO: 40 quill stroke: 100 mmspindle turning speed range: 40 - 2000 U/minvoltage: 380 VTable dimensions: 800 x 400 mmweight: 1,9 ttotal power requirement: 3,0 kWdimensions of the machine ca.: 1,90 x 1,80 x 1,90 mdigital readout, 3-axis: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 800 mmz-travel: 1000 mmControl: Heidenhain type: TNC 155 table surface area: 3000x800 mmturning speeds: 2000 U/minspindle taper ISO: 50 total power requirement: kWweight of the machine ca.: 16 tdimensions of the machine ca.: 7,8x3,85x3,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.

- X: 300 mm - Y: 160 mm - Z: 340 mm - Speed range: 40 - 2000 rpm - Clamping surface: 600 x 210 mm - Spindle mount: SK 40 - Control: TNC 113 digital display - Total power: 1.5 / 1.9 kW - Machine weight: 1050 kg - Space requirements (W x D x H): 1.2 x 1.0 x 1.9 m - Condition: good Details rigid angle table, infinitely variable feed in three axes, rapid traverse in three axes, spindle brake, vertical milling head can be moved to spindle block 100 mm Accessories Machine feet, documentation, counter holder, no other accessories