prensas usadas para la venta

Pressure:600 tdistance between columns:2600 mmstroke:900 mmDistance table/ram, max. stroke up, adjustment up:1600 mmTable surface area:2500 x 1730 mmpressure of drawing cushion in table:250 tDie cushion stroke in table:400 mmDie cushion area in table:2300 x 1300 mmDie cushion pressure in ram:63 tDie cushion stroke in ram:160 mmDie cushion area in ram:1900 x 1300 mmRam surface:2500 x 1730 mmSide window:1100 mmOil volume:3500 lPower capacity:200,0 kWDimensions (WxDxH):4,1 x 2,8 x 9,6 mHeight above floor:6,4 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Machine Type: Hydraulic Two-Column Press Manufacturer: HYDROMAK Model: P250T Year of construction: 1974 Condition: very good Offer Type: Used Machine Specifications: Compressive force: 250 t Projection: 620 mm passage Table: 610 x 610 mm Installation height: 385/515 mm Propulsion: 7.5 kW Remark: Two-handed and foot release Weight: 3200 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg

Working length: 3500mm, the pressure bar of the machine must be realigned. ... más información

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press-Manufacturer: Kalisz, manual screw press type YB-1 with solid base-Pressure: max. 10,000 kg-Stroke: 200mm-Intermediate size: 320 mm-Spindle holder: Ø 20 mm-Table size: 290 x 250 mm, slot width 14 mm-Dimensions: 1160/860/H1750 mm-Total weight: 350 kg

pressure: 15 tthroat: 160 mmstroke: 6 - 60 mmram adjustment: 60 mmno. of strokes: 120 Hub/mintable height adjustment: 150 mmtable surface area: 500 x 350 mmram hole: 30 mmtotal power requirement: kWweight of the machine ca.: 850 kgdimensions of the machine ca.: 0,75 x 0,85 x 1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Description: Serial no.: 058-005/9 Nominal force: 160 Np Operating pressure: 144 kg/cm² Plunger stroke: 500 mm Projection: 380 mm Maximum distance between table and ram: 800 mm Downward speed: 200 mm/s Trunnion Ø: 40 mm Installation height: 300 - 800 Upwards speed: 250 mm/s Table size: 900 x 630 mm Plunger surface: 530 x 400 With deep-drawing device under the worktop Additional equipment: 2-hand operation, additional ram 250 x 200 Caution: Stand cracked and secured with frame.Max. pressing force: 160 to, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,400 x 3,600 mm

pressure:063 tthroat:250 mmstroke:8 - 100 mmStroke rate:47 - 140 / minDistance table/ram, max. stroke up, adjustment up:415 mmTable surface area:710 x 480 mmHole in the table:280 / 250 mmTable height above floor:800 mmPassage to the back:290 mmRam surface:450 x 280 mmRam adjustment:63 mmWeight:4,0 tDimensions (WxDxH):1,5 x 1,6 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical

pressure: 125 tthroat: 400 mmstroke: 6-125 mmram - range of adjustment: 100 mmdayligth: 400 mmtable surface area: 1100x750 mmno. of strokes: 60 Hub/mindayligth: 525 mmtotal power requirement: 14 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: BxTxH 1500x2200x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3150 ton Year of construction: 1975 Weight: 66 t  ... más información

Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight:  ...

pressure:100 tthroat:450 mmstroke:170 mmdistance table/ram, max. stroke up, adjustment up:450 mmtable surface area:3220 x 800 mmtable height over floor:850 mmram surface:3220 x 800 mmspeed down:50 mm/sspeed up:150 mm/sworking speed:7 mm/soil volume:600 lpower requirement:20,0 kWweight:16,0 tdimensions (WxDxH):3,7 x 2,5 x 2,6 m

pressure:500 tdistance between columns:1220 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1000 mmtable surface area:1600 x 1200 mmpressure of drawing cushion in table:320 tstroke of drawing cushion in table:150 mmdrawing cushion surface in table:750 x 625 mmpressure of drawing cushion in ram:180 tstroke of drawing cushion in ram:100 mmdrawing cushion area in ram:750 x 625 mmram surface:1600 x 1200 mmtable height over floor:800 mmspeed down:665 mm/sspeed up:530 mm/sworking speed:34 - 100 mm/squantity of oil:2000 lpower requirement:180,0 kWweight:40,0 tDimensions (WxDxH):3,2 x 2,4 x 7,5 mDepth of foundation pit:4,1 mHeight above floor:5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Pressure:200 tdistance between columns:1910 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:800 mmtable surface area:1900 x 1150 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:300 mmdie cushion area:1500 x 950 mmtable height over floor:800 mmside window:1000 mmram surface:1900 x 1100 mmreturn capacity:36 tspeed down:400 mm/sspeed up:170 mm/sworking speed:30,5 mm/soil volume:1500 lheight over floor:4,85 mheight beneath floor:2,6 mpower requirement:45,0 kWweight:38,0 tdimensions (WxDxH):3,05 x 2,8 x 5,55 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

Connected load: 4kW, weight: 2t, an inspection is possible. ... más información