- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- BDK (1)
- ... más
Fabricante:
(Categoría: 1300)
Año de construcción: 2010
usado
Two identical machines are available, max. speed: 600m/min, min. width 250mm, roll diameter: 200-800mm, roll width: 600-4000mm, thickness: 54-350µm, with documentation and spare parts, has been regularly serviced, on-site inspection is possible. ... más información
Año de construcción: 2012
usado
Assembly room dimensions: 1020x770mm, table dimensions: 920x690mm, max. PCB dimensions: 690x760mm, connected load: 1500W, length: 2100m, width: 2100mm, weight: 900kg, with feeding of components from belt, bar, belt section, tray and bulk belt, suitable for chips 01005, fine pitch 80x80mm, pitch 0.3mm, BGAs, μBGAs, CSPs, QFNs, special components such as connectors and wired LEDs, an on-site inspection is possible.
Año de construcción: 2014
usado
Max. printing area: 400x400mm, frame dimensions: 450x450-736x736mm, axis range: +/-5mm, connected load: 600W, length: 1540mm, width: 872mm, height: 1380mm, weight: 450kg, suitable for series production with small and medium quantities, quick changeover between individual jobs, suitable for double-sided PCBs, magnetic table with vacuum block, fast printing accuracy and high repeat accuracy, has been regularly serviced, on-site inspection is possible.
Año de construcción: 2007
usado
Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible. ... más información
usado
Format: 570x820mm, an inspection is possible. ... más información
Año de construcción: 1972
usado
Format: 1000x700mm, an inspection is possible. ... más información
usado
There are two identical machines available, format: 570x770mm, an inspection is possible. ... más información
Año de construcción: 1955
usado
usado
Año de construcción: 2020
usado
As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible. ... más información
usado
Usable volume: 1400l, melting kettle capacity: 90l, with anchor agitator and a homogenizer, for heating and cooling, was mainly used for the production of lotions, an on-site inspection is possible. ... más información
Año de construcción: 2009
usado
Max. nominal temperature: 200°C, internal dimensions: 371x415x345mm, capacity: 53l, max. load: 40kg, volume flow: 1-30m³/h, connected load: 1.7kW, length: 744mm, width: 630mm, height: 576mm, weight: 82kg, with documentation and vacuum pump, an on-site inspection is possible, has been maintained regularly
usado
There are ten Industrial Robots ABB IRB 6400 und four ABB IRB 4600 available. ... más información
Año de construcción: 2000
usado
X-axis: 1000mm, y-axis: 1500mm, z-axis: 800mm, table dimensions: 1100x1200mm, connected load: 4kVA, control: Pantec pro, length: 3260mm, width: 2030mm, height: 3500mm, weight: 6.6t, operating hours: approx. 16,000h, the machine received new glass scales and a control in 2014, has been regularly serviced, with Renishaw measuring head and documentation, without accessories, can be inspected on site.
usado
Functions according to the penetration technology, with documentation and accessories, an inspection is possible. ... más información
usado
Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible. ... más información
Año de construcción: 2005
usado
Max. load: 240kg, weight: 1.267t, with controls, was maintained regularly, an inspection is possible. ... más información
Año de construcción: 2016
usado
Includes two Rectifying Module BMR Colibrì, with documentation, an inspection is possible. ... más información
Año de construcción: 2016
usado
Max. printing format: 1200x650mm, max. printing speed: 1000mm/s, connected load: 8kW, with documentation, has been regularly serviced by the manufacturer, on-site inspection is possible. ... más información
Año de construcción: 1995
usado
X-travel: 380mm, y-travel: 450mm, z-travel: 280mm, max. load: 410kg, probe: Renishaw PH1, length: 890mm, width: 840mm, height: 1370mm, weight: 360kg, with documentation, an inspection is possible. ... más información