Fabricante:
(Categoría: 1300)
Complete automated system with bin-pick cell incl. two cameras for picking up the parts in the bin with Stäubli TX 90XL CS8C controller for handling the parts from the bin. 2x Stäubli RX 160L with one CS8C controller each Östling AIOP marking laser Beckhoff controller for the entire system 2 infeed conveyors for raw parts, 1 outfeed conveyor for e.g. finished parts.
max. soldering width/passage height/board length: 340mm/100mm/500mm. max. wave height: 7mm, solder volume SnPb/SnAgCu: approx. 185kg/150kg, heating time from 20°C to 250°C: approx. 90 min. Preheating zones: 1, preheating power: 3kW, max. preheating temperature: 420°C. Soldering frame transport width: 417mm, transport angle manually adjustable: 6-8°, transport speed min.-max.: 0.3-2.0 m/min. Including 2 soldering frames: Profile: 18mm, lug L: 381mm. On-site inspection is possible.
There are two identical machines available, compressed air connection: 5 bar, on-site inspection is possible. ... más información
Weight: 2t, an inspection is possible, with documentation. ... más información
X-axis: +/-100mm, measuring range: 600x300x200mm, max. workpiece weight: 25kg, the machine is as good as new, an on-site inspection is possible. ... más información
Working width: 650mm, working height: 910mm+/- 30mm, capacity: 50 circuit boards, connected load: 0.2kW, length: 640mm, width: 760mm, height: 1000mm, with documentation. ... más información
Sieve size: 20, 45, 75, 100, 150, 250, 500µm, vacuum: 1500-5500mm, volume flow: 30-115m³/h, length: 503mm, width: 370mm, height: 380mm, weight: 20kg, with documentation, sieve holder and hoover, on-site inspection is possible, there are no defects, the device has only been used a few times. ... más información
Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used. ... más información
Sand feeding/mixing/reactors (modernized in 2007): Control system: Siemens S7, number of machines: 23. 5x Jöst discharge chutes, sand screen, mixer, Eirich UE 62 discharge unit, bucket elevator, reactors, twin-shaft mixer, various weighing belts and conveyor belts. Press plant (modernized in 2012): Control system: Siemens S7, number of machines: 6. 2x Atlas presses incl. table removal and stacking device, scraper, empty trolley platform and Semet turntables, Atlas blank transfer table, 2 press tools in use and 22 additional tools available, various conveyor belts. Hardening shop/steam boiler (modernized in 2015): Control system: Siemens S7, number of machines: 13. Dapf boiler standard burner Saacke, 9x hardening boiler Scholz with automatic condensate drainage, water treatment Grünbeck, condensate collection tank, low-pressure feed water tank, approx. 130 hardening scales. Packaging sy ...
Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. ... más información
Test chamber volume: 900 l, Temperature range: -40°C - +100°C, humidity range: 10 - 98, Test chamber weight: 750kg, refrigeration system weight: 480kg. Refrigerant, refrigerant quantity and operating pressure: R134a/0.8kg/18bar, R507/4.0kg/27bar, R23/1.0kg/27bar ... más información
Suitable for cooling and tempering, motor rotational speed: 1440/min, motor power: 4kW. ... más información
Materials: Paper from 10 to 250 g/m², plastics, polypropylene, siliconized papers. Max. Width: 1200mm, max. diameter of parent roll: 1300mm, max. weight of roll: 1200kg. Min. length: 180mm, max. length: 1000mm, tolerance: +/- 0.2mm. Max. mechanical speed: 180 cuts/minute, max. stack height: 1300mm. Static current elimination system.
Operating pressure: 5.5-8bar, connected load: 2kW, weight: 2t. ... más información
Process paths (X/Y/Z): 300mm/320mm/100mm, 3-axis interpolated, 16 inputs and 16 outputs, programming control panel, memory card, with CE. ULTRASAVER dosing kit: pressure range: 0-7bar, viscosity: low to high. Cartridge holder for automatic dispensing systems: Holder size: 3cc, 5cc, 10cc, 30cc or 55cc, with spacers. JR-1001 mechanical zero point correction.
Operating pressure: 6-8bar, connected load: 1.8kW, weight: 2.32t. ... más información
Cleaning tank: Volume: 80l, 2x filter 20 inch, 5μm. 2 identical rinsing tanks: 60l, 1x filter 9 3/4 inch, 1μm. Drying chamber: max. vacuum: -0.8 bar, 5x 400W stainless steel heating elements. Injection-flood process. Dimensions (X/Y/Z): 1600mm/1000mm/2000mm, empty weight: 700kg. On-site inspection is possible.
An inspection is possible. ... más información
Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition. ... más información