mandrinadoras, centros de mecanizado usadas para la venta

Description: Serial number AL1950 Documents: use and maintenance manual, programming disketteApprox. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm, weight approx.: 2,500 kg ... más información

Bore diameter: variabel mmNumber of heads horizontal: 3 St.Number of heads vertical: 4 St.Dimensions (L/W/H): 6100x1500x2300 mmWeight: 950 kg1 Götzinger Power Drill drilling and milling center-------------------------------------------------Machine is FACTORY TESTED by Götzinger before delivery.Depending on the type and version, you can use the Götzinger PowerDrill to:- Drill on the front and long sides- Doweling of house doors, timbers, brackets- The drilling patterns are freely programmable- You can: drill handle olives and corner bearings, with quick-change ones Multi-spindle drilling heads- You can: mill lock cases, handles and PZ as well as 3D hinges drill- The machine has a horizontal and a vertical milling unit- A simple control allows you to create drilling and milling programs, save and access again and againStable base frame, covered with sheet metalTable support 1800  ...

Description: Max. panel width 1300 mm No of Bottom Units 1 No of injectors 1 bottom vertical units horizontal units Max. panel width 1300 mm No. Top clamps 4 spindles for horizontal boring 2  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , motor power 0.55 KW r.p.m. 2700 RPM Item inserted yes wooden dowels wooden dowels 10X50 Safety standard CE mark  ,  ,  ,  ,  ,  ,  , ,Approx. Onsite Dimension. (l x w x h): 3,250 x 1,900 x 1,800 mm, weight approx.: 1,500 kg

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm. • Dr ...

Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  ,drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg

Description: Axis Configuration X-Axis: 3690 mm Y-Axis: 1730 mm Z-Axis: 300 mm Max Power Max Electro spindle power: 11/13 kW Max power installed: 20 kW Utilities Vacuum pump capacity: 90 m3/h Compressed air pressure: 0.6 kPa Compressed air consumption: 250 NI/1 Air connection coupling: Gas ½” Dust Extraction Dust extraction outlet: 200 Ø mm Extraction air consumption: 3200/3400 m3/h Extraction air speed: 28/30 m/s Control & Program Control: Genesis evolution runs on Windows system Machine Type 3-Axis CNC Machine Motor Type Horizontal Motor Processing Units Drilling Unit Groove Saw Tool Storage Tool Magazine Fixturing System Pods, Rails, and Clamps  ,vacuum pump: 90 m³/h, total electrical load: 20 kW, x-motion: 3,690 mm, y-motion: 1,730 mm, z-motion: 300 mm, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,300 x 2,000 mm, weight approx.: 3,000 kg

Description: SCM Record 110 Al Prisma CNC Machine Specifications: Brand: SCM Model: Record 110 Al Prisma Year of Construction: 2010 Number of Axes: 5 Drilling Unit: Yes Groove Saw: Yes Tool Magazine: Yes Pods, Rails, and Clamps: Yes Safety Mats: Yes x-motion: 3,060 mm, y-motion: 1,240 mm, Approx. Onsite Dimension. (l x w x h): 6,200 x 3,800 x 2,400 mm, weight approx.: 4,000 kg

Description: Use: The CNC Router is suitable for all types of plastics, wood, composite materials, and non-ferrous metals such as copper, aluminum, brass, etc. Hours: Spindle Hours: 967 hours, still in daily use. Machine Running Hours: Approximately 4300 hours. Name: CNC ROUTER Brand and Model: JINAN SUDIAO 2141 (2018) Specifications: Work Area: 2100x4100mm Spindle Power: 9.0kW Italy HSD air cooling spindle Tool Holders: ISO 30 Tool Capacity: 12 Tool ATC carousel Control System: Taiwan Syntec 6MB Control System with handwheel Motors and Drivers: 750w Japan Yaskawa servo motors and drivers Reducer: Japan Shimpo Reducer Table Structure: Vacuum suction table with T-slot Guide Rail: Taiwan PMI Square orbit 30mm Driving Method: Germany Herion Helical gear rack transmission Transmission Type: X,Y: Rack and pinion Z: Ball Screw Inverter: 11kW Delta Inverter Vacuum System: 4kW Air pump Po ...

Description: Biesse Rover A4.55 - CNC Center , Model: Biesse Rover A4.55 Type: 4-axis CNC Center Year: 2010 Working Area: 5500mm x 1250mm Rails: 10 Tooling: Router, Drilling Unit, Horizontal Motor Axis: 4-axis (including C-axis) Tool Magazine: 20 positions (Without tools) Aggregates: Floating, 1-exit, 2-exits, Sawblade Tool Holder Type: ISO30 Features: Reference Stops, Detection Sensors, Thickness Measurement vacuum pump: 250 m³/h, 5-axis machining: No, x-motion: 5,680 mm, y-motion: 1,460 mm, z-motion: 200 mm, Approx. Onsite Dimension. (l x w x h): 7,900 x 4,500 x 1,980 mm, weight approx.: 3,900 kg

Description: Min. panel length 110 mm Max. panel length 800 mm Max. panel width 1250 mm No. Top clamps 6 no. bottom vertical units 1 with positioning by NC spindles for vertical boring 1 No. injectors 2 No. storage tank 1 Item inserted wooden dowels Control system KOCH NUMERIC Safety standard CE mark Safety photocellsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,750 x 2,200 mm, weight approx.: 3,000 kg

Description: Type of work Drilling Routing X axis working area 6000 mm Y axis working area 1850 mm Working Table Pod and Rail Main Electrospindle power 7.5 KW Number of controlled axes 4 axes Total number of drilling spindles 42 Total number of tool changer positions 7 No. of Rails 10 Vacuum pump ROUTER SPINDLES Unit : top No. controlled axes : 4 Automatic tool change : yes Motor power : 7.5 kw GROOVING UNIT , Max. tool diameter : 160 mm Motor power : 3 KW TOOL MAGAZINE , No. positions : 7 Tool : positioned on the machining head Control system NC 1000 TOOLS NOT INCLUDED  ,Approx. Onsite Dimension. (l x w x h): 7,700 x 3,400 x 3,000 mm, weight approx.: 7,000 kg

Description: Max. panel width 3200 mm Max. panel length 1200 mm No of Bottom Units 6 No of Top Units 4 Lateral horizontal groups , Automatic waste ejection system TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... más información

Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... más información

Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDEDApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Type of work Drilling Routing X axis working area 3060 mm Y axis working area 1395 mm Working Table Pod and Rail Main Electrospindle power 9 KW Number of controlled axes 3 axes Total number of drilling spindles 28 Total number of tool changer positions 7 X axis work area 2971 mm Y axis work area 1395 mm No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 6 Vacuum pump yes No. pumps 1 Single capacity 250 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 20 Horizontal Boring Spindles in X : 6 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 28 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Automatic tool change : yes Motor power : 9 kw Tool magazine 1 TOOL MAGAZINE 1 No. positions : 7 Tool : positioned on the machining head Control system WINDOWS XP Machine programming ...

SPECIFICATIONS: CNC Editor BSolid Basis Working range X mm: 200 - 2600 Working range Y mm: 35 - 900 Working range Z mm: 8 - 80 BH17 autonomous spindle unit Configuration: 10 autonomous vertical spindles with 32 mm spacing, with tool holder system, of which: - 5 arranged in X-direction - 5 arranged in Y-direction 3 independent horizontal spindles, arranged in the X and Y directions, equipped with the tool holding system, of which - 2 double outputs arranged in the X-direction - 1 double output arranged in Y-direction 1 sawing unit with saw blade diameter 120 mm, clockwise rotation, fixed working direction in X-direction Key features: Saw blade Ø 120 mm Max. cutting depth: 25 mm Cutting thickness: 4 mm Clockwise rotation of the tools - tool fastening by screws Vertical pneumatic unlocking The control unit is designed to accommodate the electrospindle. ...

Description: Machine: Net working area:min 200x70 ,mm ,to max 3050x850 ,mm Workpiece thickness:12-60 mm Workpiece weight: max 35 kg Speed: X and Y: 50 m/min, Z: 15 m/min Drill aggregates: 5 Drill spindles for machining the top of workpiece in 'X direction'. All 5 bores are individually adjustable 4 Drill spindles for machining the top of workpiece in 'Y direction'. All 3 bores are individually adjustable 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 bores are individually controllable 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 bores are individually controllable Free aggregate - Motor 5 KW-S1 ( 1,250 / 24,000 rpm) Saw aggregate: Integrated saw aggregate - Cutting diameter 100 mm . Equipment: Programming and control system POWER CONTROL PC 85 + WOODWOP SOFTWARE - PC - TFT color screen with graph ...

SPECIFICATIONS: Dimensions of the work table mm: 1,800 x 1,600 with two working areas 02 Automatic tool changing spindles Electrospindle type ISO 30 12 tool changing stations Copy milling machine 02 drilling units (13 vertical, 2+2 horizontal) 02 Becker vacuum pumps with 250 m3 Electrical control cabinet

Description: Number of spindles for vertical drilling: ,14 + 12 Number of spindles for horizontal drilling 4-sided: ,6 + 2 Max. panel thickness: 115 mm Spindle speed: ,4000 rpm Routing rotation speed: 1000 - 24000 rpm Routing: ISO 30  ,  ,  ,vacuum pump: 120 m³/h, serial number: 60,835, total electrical load: 14 kW, 5-axis machining: Yes, Number of vacuum pumps: 1 pieces, x-motion: 3,372 mm, y-motion: 1,200 mm, z-motion: 125 mm, path-feed rate max. X-axis: 75 m/min, path-feed rate max. Y-axis: 75 m/min, path-feed rate max. Z-axis: 15 m/min, saw unit: 0 - 90 graden roteerbaar, control: NC481, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 2,000 mm, weight approx.: 4,500 kg