Fabricante:
(Categoría: 205)
Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch ...
Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. ...
Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...
Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...
In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg
Specifications: Workpiece length: min 200 mm Workpiece length: max 2500 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 16 mm (for horizontal machining) max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 30 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces Drill Gear V8 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2800 1/min, frequency controlled Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle spacing: 32 mm Spindle type: individually controllable power control PC85 ...
CNC Machining Center IMA BIMA 610/V Type 140/600 Machine in CE design Travel range in X 7700 mm Travel range in Y 1900 mm Travel range in Z 440 mm Working range in X-direction with standard units 6000 mm Working range in Y-direction with standard units 1400 mm Max. clamping height from the upper edge of suction plate Z1 100 mm Z2 depending on equipment / application
Model Forma two vertical drill beams 17 – spindly adjustable, 1 horizontal drill beam 17 – spindle mobile Sales on behalf of customers ... más información
SPECIFICATIONS: CNC Editor BSolid Basis Working range X mm: 200 - 2600 Working range Y mm: 35 - 900 Working range Z mm: 8 - 80 BH17 autonomous spindle unit Configuration: 10 autonomous vertical spindles with 32 mm spacing, with tool holder system, of which: - 5 arranged in X-direction - 5 arranged in Y-direction 3 independent horizontal spindles, arranged in the X and Y directions, equipped with the tool holding system, of which - 2 double outputs arranged in the X-direction - 1 double output arranged in Y-direction 1 sawing unit with saw blade diameter 120 mm, clockwise rotation, fixed working direction in X-direction Key features: Saw blade Ø 120 mm Max. cutting depth: 25 mm Cutting thickness: 4 mm Clockwise rotation of the tools - tool fastening by screws Vertical pneumatic unlocking The control unit is designed to accommodate the electrospindle. ...
Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J ... más información
WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL
Opti B17Pro Bench drilling machine 5 speeds Drilling capacity in steel 16 mm Motor 500W 230V Spindle retainer MK2 Drilling table Tilt/Swivel +-45° / 360° Net weight: 39kg Table length: 235 mm Table width: 220 mm G & pieces 3003171SE ... más información
Pillars - or drilling machines Smoothness thanks to polished splined hubs High concentricity by hardened and ground spindle Large speed range Heavy, solid casting Drilling depth stop adjustable with millimetre scale Low maintenance gearbox with grease lubrication Electrical connection: 400 V / 3 pH 50 Hz Engine power: 1,1 / 1,5 kW Drilling capacity in steel: Diameter 28 mm Spindle retainer: MK 3 Projection/Quill stroke: 260 mm / 127 mm Spindle speeds/levels: 75 - 2900 min-1/8 Table length x width / T-slots: 376 x 394 mm / 14 mm Column diameter: 92 mm Dimensions Lxwxh: 670 x 550 x 2, 080mm Net weight: 184 kg G & pieces 3034230
SPECIFICATIONS: Dimensions of the work table mm: 1,800 x 1,600 with two working areas 02 Automatic tool changing spindles Electrospindle type ISO 30 12 tool changing stations Copy milling machine 02 drilling units (13 vertical, 2+2 horizontal) 02 Becker vacuum pumps with 250 m3 Electrical control cabinet
AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50
AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage
AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50