Fabricante:
(Categoría: 206)
Brick press with self-cleaning system A-200 Bogatyr2” Productivity 480 bricks per hour Total pressure of hydraulic cylinders: maximum 240 tons (top of them) Product size, max 270x250x110/90 mm Operator panel 7 inch display Built-in help and hint system Automatically check the density and height of the brick in each cycle Control of brick parameters for rejection in each cycle Yes Automatic adjustment to eliminate defects in the next cycle Yes Overall dimensions, no more than 2200x1300x2400 mm Weight of the press with oil station, no more than 3.2 tons
Dimensions of the press plate 50x100 cm You can also buy a copy cutter. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock. ... más información
Plate press, gluing press, veneer press, splicing press, heating press, molding press -Handover: in the current condition as seen -Heating plates: the middle heating plate is defective -Manufacturer: Paul Ott, veneer press heatable type JU 80 -Drive: hydraulic -Heating capacity: 24 kW -Working area: 2550 x 1350 mm - Opening height: 400 mm -Dimensions: 3325 /1540/H1850 mm
Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes
Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than: ...
pressing area: 3000mm x 1350mm; opening: 400mm; heating: electric; plate surface: ALU - eloxiert; Emergency stop switch: yes; pressure: 115t; number of cylinder: 6; electricity: 57A; machine length: 3500 mm; machine width: 1500mm; weight: 5500kg; ... más información
Working dimensions 250 cm x 110 cm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.3.2. ... más información
Description: Loader belt dimensions 1920 X 3200 mm , Integral loader dimensions: 2200 x 4400 x 1000 mm  , Unloading roller conveyor dimensions:  ,1900x 2500 x 1000 mm  , Pressing table dimensions: 1900 x 3500 mm  , Equipped with No. 6 pressing plungers DIAM: 150 mm approx  ,Approx. Onsite Dimension. (l x w x h): 9,500 x 3,000 x 2,100 mm, weight approx.: 6,000 kg
Description: • Perforated plate hydraulic press for chairs • Serial number 1227 • Table dimensions 1540 x 940 mm • Main table with 2 positionable hydraulic pressure cylinders • Lower table with 2 hydraulic pressure cylinders, table dimensions 500 x 500 mm • Hydraulic pump with motor of 1.10 KW-2850 rpmApprox. Onsite Dimension. (l x w x h): 1,660 x 1,250 x 900 mm, weight approx.: 400 kg
Description: Pressure 80 to 200 tons, heating surface 1300 x 3500 mm, 6 cylinders in total, without CE certificate ,Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 2,300 mm, weight approx.: 6,000 kg ... más información
Description: A total of 6 cylinders, adjustable in height, without wood, with screw clamps approx. 15 pieces, without further accessories ,Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 2,000 mm, weight approx.: 380 kg ... más información
Description: Internal height min. 200 mm, max. 1350 mm Width min. 200 mm, max. 2500 mm Without CE certificate Voltage 400 V Pressure according to technical documentation up to 2000 kpApprox. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,500 mm, weight approx.: 2,000 kg ... más información
Description: • Semi-automatic pneumatic carcase press • Entrance table length 1650 mm with belt width 600 mm • Maximum workpiece dimensions to press approx. 2200 x 600 x 1200 mm • Minimum pressing workpiece length approx. 300 mm • Minimum pressing workpiece height approx. 300 mm • 4 pneumatic horizontal cylinders and 4 vertical ones • Vertical pressure from 0 up to 1900 kg • Horizontal pressure from 0 up to 600 kg • Feed speed from 12 m/min • Adjustable clamping timeApprox. Onsite Dimension. (l x w x h): 5,600 x 1,200 x 2,610 mm, weight approx.: 1,800 kg
Description: • Carcase press • Pneumatically driven • 3 x 2 vertical pressing cylinders • 2 x 2 horizontal pressing cylinders • Maximum workpiece dimensions approx. 2600 x 600 x 1400 mmApprox. Onsite Dimension. (l x w x h): 3,500 x 1,050 x 2,350 mm, weight approx.: 800 kg ... más información
Description: • Heated veneer press • Serial number A1430106 • Total installed power 16 KW • Working surface 3000 x 1300 mm • Maximum opening approx. 400 mm • Total force 70 T • 6 pressure cylinders diameter approx. 70 mm, hydraulic motor power 1.50 KW-1420 rpm • Pressure and pressing temperature are adjustable • Heating of the plates by electric resistancesApprox. Onsite Dimension. (l x w x h): 3,460 x 1,700 x 1,900 mm, weight approx.: 3,500 kg
Description: • Veneer press • Working surface 2500 x 1300 mm • Maximum opening approx. 430 mm • 4 pressure cylinders diameter approx. 90 mm, hydraulic motor power 1.47 KW-1450 rpmApprox. Onsite Dimension. (l x w x h): 2,920 x 1,570 x 2,100 mm, weight approx.: 3,200 kg ... más información
Description: Manufacturer: Grecon Dimter Press for massive wood panels Machine type: ProfiPress 2500HF-3 Serial number: 2456.32, year 2005 Timber data: Type of timber: softwood or hardwood Infeed length (min/max): 400/2500mm Parallel width (min/max): 30/170mm Parallel height (min/max): 8/60 mm, for soft wood 8/40 mm, for hard wood Dimensions: cca 9.000 x 7.300 x H2.000 mm Supply of power: 400V, 50Hz, 92 kW, Weight: 15.000 kg The line consists of: 1. Transversal infeed station with gluing unit 2. Press 2500 x 1300mm with HF Generator 40 kw, Cavallo 3. Splitter saw 4. Transport table Attention! The line may be dismantled after 15.07.2024Approx. Onsite Dimension. (l x w x h): 9,000 x 7,300 x 2,000 mm, weight approx.: 15,000 kg
Description: maximum panel length: 3000 mm working height : 1000 mm panel thickness 25 - 90 mm number of working units 6 pcs maximum weight allowed / work unit 150 kg number of clamps / working unit 8 pcs clamping mode of the clamps pneumatic number of pneumatic motors 1 pc (Ingersoll 3840 P) top panel pressing mode pneumatic number of vertical pressing pistons 1 piece compressed air pressure 1/2 - 6 bar electric motor 400V, 50 Hz, 1,5 kW rotating mode of working units: electric Approx. Onsite Dimension. (l x w x h): 4,000 x 3,400 x 3,000 mm, weight approx.: 1,500 kg
Glue star or rotating gluing press Hess Rotor for gluing wood to form panels with 8 pressing surfaces (1,250 mm each). Incl. glue application machine and lots of inlay wood with different dimensions., working area: 2,500 x 1,100 x 80mm, pressing surfaces: 4 x 2, Pressing force: 20,000 N, Hold-down: 4 x 4
Description: Briquetting Machine Serial number 164 Power 7.5 kW Pump capacity 34 cm3 Tank Ø 1000 x 900 mm CE availableserial number: 164, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,900 x 1,600 mm, weight approx.: 800 kg ... más información