rociadoras de cola usadas para la venta

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Semi automatic edge bander Make: VITAP Type: FUSION 2.0 New machine Technical datas: - For straight and shaped pieces 10 - 60 mm - Edge thickness 1-3 mm - Tefloned gluing station with quick disassembly system - Glue and tape application on big and small shaped panels - Equipped with glue pot with 1 Kg capacity - 1 glueing roller - 2 rollers to copy the shape of the piece - 1 tilting support roller to enable the exit of the panel after banding - Glue application amount is adjusted via knob - Set up of the glue temperature - Automatic guillotine for coiled material up to 3 mm x 45 mm THREE KIND OF WORKS: - By Encoder - By Encoder + laser - By Pedal cut Panel materials - Solid wood - Chipboard (laminated or not) - Multilayer material - MDF or HDF (laminated or not) - Panel dimensions range: min 50x200mm max 1000x2000 mm - Shaped pieces Dimensions ran ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Hot melt contour edge bander Make: VITAP Type: SMART New machine For straight and shaped (convex or concave) pieces - To glue pieces 10-60 mm thickness, - PVC / melamine / veneer / plastic / laminate / solid wood - Edge 0,5 - 3 mm - 1 glue spreading roller 10-60 mm thickness - Guillotine to cut bands up to 3 mm thickness - 2 tape feeding speed (3m/min or 7 m/min) - Tape plate d=520mm - Glue pot 1kg capacity Solid Phenolic table - Easy to clean - No transmission of heat - Plastic cups to raise the piece above the table. So the panel weight is not focused on the glued band. - Electronic temperature control - Foot pedal cutting system - CE standards Optional for an extra charge available - Vitap glue 2 kg - Vitap glue 10 kg

Contour edge bander Fabrikat: VITAP Type: BC91 EVO Demonstration machine Technical data: - For straight and curved pieces (convex and concave) - To glue pieces thickness 10-60 mms., in PVC, melamine, veneer, plastic laminate and solid wood - 2 glue spreading rollers - Cutting guillotine up to 3 mm. thickness - Encoder for high precision cutting of the tape ( for shaped closed pieces) - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece - End switch tape cut (only for straight pieces) - Feeding speed adjustable from 3mt to 20mt per min. - Solid Phenolic table easy to clean and with no transmission of heat - Manual / Automatic band cutting device - Glue pot (kgs. 3), with electronic adjustable heating system -Tilting table 0°-45° - Standard accessories - CE standards

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... más información

Description: Workpiece: Workpiece thickness: min. 6 mm, max. 45 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Maximum edge thickness: 3 mm Drive: Feed rate: 10 m/min Power: 1.5 kW Control voltage: 24 VDC Compressed Air: Operating pressure: 6 Bar Limit pressure: 8 Bar Connection: Quick coupling, nominal width 7, hose inner diameter at least 12 mm. Air consumption: 5 L/min Machine comes without RETURN ,serial number: 98/1-003, Approx. Onsite Dimension. (l x w x h): 5,335 x 1,670 x 1,415 mm, weight approx.: 3,000 kg

Description: main engine power: 1 kW serial number: 9915 pneumatically driven pressing length approx. 2500 mm tabletop approx. 2500 x 620 mm with electronic temperature control safety light barriers dimensions in mm: approx. 3200 x 1500 x 1900, weight in kg: approx. 1300 serial number: 9,915, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,500 x 1,900 mm, weight approx.: 1,300 kg

Description: Flexline HOMAG PROFI KAL 330/6/A3/S2 edge banding machine  , , , serial number: 0-200-24-9153 is equipped as follows:  , , , HOMAG PROFI TBL 100/35/12 feed table with fully automatic workpiece feeding system WZ10 for workpieces with different dimensions in longitudinal and transverse direction Technical data: - Workpiece length 250 - 2500 mm - Electro-pneumatically controlled cross weigher - Air cushion table ( is not included in the scope of delivery )  , , , 2 HOMAG PROFI KAL 330/6/A3/S2 edge banding machine Technical data: - Universal trimming unit UF11, electro-pneumatically controlled  ,Note: the feedback is not included in the scope of delivery  ,serial number: 0-200-24-9153, workpiece thickness: max.60 mm, feed: 18-25 m/min, joint trimming unit: Ja/Yes, snipping unit: Ja/Yes, fine trimming unit: Ja/Yes, profile trim ...

Description: Cross-cut saw unit : 1 motor / Flush trimming / Raidus trimming / Flat scraper blade Buffing unit Glue thickness max : 8 mm Thickness of roll material max : 3 mm Units synchronised : pneumatic Gluing height max : 50 mm Workpiece length min : 300 mm - Workpiece width min : 90 mm Feed rate max : 10 m/min Strip magazine : Yes Total connection : 12.6 kW ' Some of the technical data is taken from the manufacturer's brochure. Actual values may differ' Machine length : 4,300 mm Milling motors have slight bearing noises - tools must be changed - slight leakage at the DL cylinders. PRICED IN FUNCTIONALLY TESTED CONDITION , SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. , If the photo shows obje ...

Compact and mobile edge banding machine Bi-Matic 4.5 Starter Plus for gluing and processing edge material Including extensive supplies of glue and edge material., Aggregate: 4, Aggregate 1: Caps, Aggregate 2: Round, Aggregate 3: Pulling blade, Aggregate 4: Babble ... más información

Description: Bench size: 1190 x 370 mm Maximum edging height: 220 mm Total dimensions approx. (length x width x height) 1400x1100x1300Approx. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,300 mm, weight approx.: 200 kg ... más información

Description: Number of rollers: 2, roller length 1330 mm, roller diameter approx. 200 mm, voltage 380 volts, without additional accessories, without CE certificateApprox. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,500 mm, weight approx.: 300 kg ... más información

Description: - Edge banding machine - Serial number 37082 - Total installed power 32 KW - Edge thickness in strips up to 20 mm - Edge thickness in the roll from 0.30 mm to 3 mm - Workpiece thickness from 10 mm up to 60 mm - Adjustable feed speed from 10 m/min up to 24 m/min - Feed motor 5.50 KW - Motorized height adjustment - CNI control - Joint cutting unit, 2 x motor - Edge feeder for strips and roll, edge magazine for one edge roll - NORDSON MC 12 gluing unit for PUR adhesive - Pressure unit with (1+6) rollers - Snipping unit, 2 x motor - Rough trimming unit, 2 x motor (upper motor missing) - Fine trimming unit, 2 x motor 0.65 KW-12000 rpm - Profile trimming unit, 2 x motor - Profile scraper unit - Trimming unit swivels from 0° to 90°, motor 3 KW-3000 rpm - Flat scraping unit - Edge buffing unit, 2 x motor - Hot air blower unitApprox. Onsite Dimension. (l x w x h): 10,700 x 1,250 x  ...

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of deliveryApprox. Onsite Dimension. (l ...

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for max. workpie ...

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift with feed stop G ...

Description: Workpiece and edge parameters Workpiece width min: For workpiece thickness 8-22 mm | 70 mm For workpiece thickness 23-40mm | 120 mm For workpiece thickness 41-60mm , 150 mm depending on the workpiece length Workpiece protrusion | 38 mm Workpiece thickness | 8 - 60 mm Max. edge height = workpiece height, + 6 mm Edge material roll / 0.4 - 3 mm Edge cross-section max. For PVC | 135 mm For veneer | 100 mm Max. roll diameter , 830 mm Edge material strip , 0.4 - 15 mm (or 12 mm) (When using the VKNR 4845 exchange trimming unit, the max. edge thickness is 12 mm!) Max. edge cross-section For strips ' 600 mm If no radius is specified, R=2 mm is retracted and delivered serial number: 0-261-20-5413, workpiece thickness: 8 - 60 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW, gluing unit: A12, snipping unit: 2 x 0,35 kW, rough trimming unit: 2 x 0,55 kW, profile trimming  ...

Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm Workpiece protrusion: 30 ...