rociadoras de cola usadas para la venta

Description: Workpiece and edge parameters Workpiece width min: For workpiece thickness 8-22 mm | 70 mm For workpiece thickness 23-40mm | 120 mm For workpiece thickness 41-60mm , 150 mm depending on the workpiece length Workpiece protrusion | 38 mm Workpiece thickness | 8 - 60 mm Max. edge height = workpiece height, + 6 mm Edge material roll / 0.4 - 3 mm Edge cross-section max. For PVC | 135 mm For veneer | 100 mm Max. roll diameter , 830 mm Edge material strip , 0.4 - 15 mm (or 12 mm) (When using the VKNR 4845 exchange trimming unit, the max. edge thickness is 12 mm!) Max. edge cross-section For strips ' 600 mm If no radius is specified, R=2 mm is retracted and delivered serial number: 0-261-20-5413, workpiece thickness: 8 - 60 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW, gluing unit: A12, snipping unit: 2 x 0,35 kW, rough trimming unit: 2 x 0,55 kW, profile trimming  ...

Description: The machine will not be available until around May 2024. Basic machine Continuous machine stand for setting up the processing unit Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive for feed stop Glue container lift for feed stop Workpiece-operated glue container clamping Adjustable infeed guide Pneumatically controlled infeed stop Workpiece transport device Transport chain 80 mm wide Precision running and guide surfaces hardened Transport chain magnetically braked Top pressure driven by composite V-belt Manual height adjustment Digital position indicator Technical data Operating voltage: 400 Volt, 50/60 Hz Feed rate: 18 - 25 m/min Feed rate with FK11 profile cutter: max. 20 m/min Working height: 950 mm Working width for workpiece thickness 22 mm: min. 60 mm Working width for workpiece thickness 40 mm: min. 105 mm Workpiece protrusion: 30 ...

Description: • Edgebander, edge banding machine • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4.40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0.45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0.45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0.45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOL ...

Description: • Edgebander • Edge thickness from 0.40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0.60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3.80 KW-12000 rpm • Sanding belt unitApprox. Onsite Dimension. (l x w x h): 7,550 x 1,150 x 1,900 mm, weight approx.: 4,000 kg

Description: • Edgebander with return system • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5.50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • Return system with inclined air table and dimensions 2020 x 1000 mm, motorized belt conveyor with useful dimensions 9000 x 1200 mm, inclined roller conveyor with dimensions 2500 x 1200 mmApprox. Onsite Dimension. (l x w x h): 12,275 x 3,800 x 2,570 mm, weight  ...

Description: • Edgebander • Serial number 14589/9-810 • Total installed power approx. 9 KW • Edge thickness from 0.40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0.75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0.22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0.60 KW-9000 rpmApprox. Onsite Dimension. (l x w x h): 4,000 x 1,450 x 1,250 mm, weight approx.: 1,000 kg

Description: • Edgebander • Serial number 147/9-909 (1999) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0.30 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1.50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0.35 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0.60 KW-9000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0.12 KW-1640 rpmApprox. Onsite Dimension. (l x w x h): 4,200 x 1,200 x 1,750 mm, weight approx.: 2,000 kg

Description: • Edgebander • Serial number 2697 • Edge thickness in roll from 0.40 mm up to 3 mm • Worpiece thickness from 8 mm up to 40 mm • Feed motor 0.37 KW • Edge feeder, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+2) rollers • End trimming unit • Fine trimming unit, 2 x motor 0.36 KW-12000 rpm, tiltingApprox. Onsite Dimension. (l x w x h): 2,800 x 980 x 1,450 mm, weight approx.: 700 kg

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...

Description: Min. edge thickness 0.3 mm Max. edge thickness 3 mm , Max. forward feed speed 25 m/min Pressure with rubber belt Panel support guides , with positioning by NC , Infeed panel alignment system , NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 3 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , glue pot for EVA hot melt glue premelter for EVA hot melt glue , Roller set to press the edge no. pressure roller 7 with positioning by NC , No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.8 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.5 KW r.p.m. : 12000 RPM , NO. EDGE PROCESSING UNITS 3 Processing Unit : Corne ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System PUR Premilling Unit yes Corner Rounding Unit yes Grooving Unit yes Max feed speed 24 m/min Maximum panel thickness 60 mm Operating Units 9 nr Min. panel height 12 mm Max. panel height 60 mm Min. edge thickness 0.4 mm Max. edge thickness 20 mm Max. forward feed speed 24 m/min Top pressure yes Pressure with rubber belt Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes Gluing system yes glue pot for PUR glue yes premelter for PUR glue yes premelter for PUR glue NORDSON Roller set to press the edge yes with positioning by NC yes No. Edge Processing Units 7 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming n ...

Description: Max. panel height 50 mm Min. panel width 70 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 10 m/min Pressure with idle wheels Panel support guides NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit Edge coil magazine Gluing system glue pot for EVA hot melt glue Roller set to press the edge no. pressure roller 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding NO. EDGE PROCESSING UNITS 4 Processing Unit : edge scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : glue scraping Control system PLC Safety standard CE markApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight app ...

Description: Max. panel height 55 mm Min. edge thickness 0.4 mm Max. edge thickness 12 mm Max. forward feed speed 13 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS Unit : pre-milling unit automatic timed intervention motor power : 2.2 KW Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue Roller set to press the edge no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 automatic timed intervention motor power : 0.35 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.55 KW r.p.m. : 11300 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : Corner rounding no. motors : 2 motor power : 0.4 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : glue scraping NO. EDGE PROCESSING UNITS 5 Processing Unit : buffing no. motors : 2 motor  ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : glue scraping Safety standard CE mark yes Total installed power 3.5 KWA ...

Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 55 mm Operating Units 7 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 8 mm Max. forward feed speed 11 m/min Top pressure yes Pressure with idle wheels Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : HL 6130 no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim  ...

Description: Joiningagreat 2 x 2kW /gluing cartridge system/capping/milling station radius chamfering 0-15°/radius drawing/ separating/ detergent spraying unit copy milling unit/ surface scraper/ fettling station edge thickness max.: approx. 0,4 - 8 mm [mm] workpiece height 6 - 50 [mm] feed speed approx.: 8 [m/min] / elect. connection: 400 V, 3Ph, 50 Hz PRICING IN FUNCTIONALLY TESTED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure / documents and may differ from actual values. ATTENTION: it is expressly pointed out that this lot corresponds only to the scope of the lot description. If there are any objects on the photo that are not explicitly mentioned in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software, operating equipment, etc. (in relation to the photo and lot d ...

Description: Manufacturer: Grecon Dimter Finger Jointing line Machine type: Combipact 4 Serial number: 193.V000307, year 2005 Timber data: Type of timber: softwood or hardwood Length (min/max): 150/1000mm Width (min/max): 30/205mm Height (min/max): 16/80 mm Ratio length / max width: 2:1 Resulting length (min/max): 3.000/6.100 mm Dimensions: 21.000 x 8.000 x H2.000 mm Space required for operation and maintenance: 22.000 x 9.000 x H2.000 mm Supply of power: 400V, 50Hz, 91 kW, 160A Control voltage 24V DC Weight: 15.000 kg The line consists of: 1. Charging unit with compartment conveyor, type BF6/600/1500 2. Infeed station, type ESTA 600/1500 3. Shaping machine Combipact, type FDL-F-205/600/1000 4. Infeed station thread in station” for press, type EKK 240/4000 Re 5. Transfer station, typeUKB 600/1000 6. Front side press, type CONTI 6100 Ll Attention! The line may be dismantled after 1 ...

Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...

Approx. Onsite Dimension. (l x w x h): 3,100 x 900 x 1,650 mm, weight approx.: 1,000 kg ... más información

Description: Serial Number: KK00018498 Type: B04 Max. working width: 2 mm max. board thickness 50 mm , Minimum board dimensions: 180x65 mm , Feed speed 6 m/min Machine with gluing unit Saw for cross-cutting Profiling unit Machine equipped with PLC Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,500 mm, weight approx.: 300 kg