mandrinadoras, centros de mecanizado usadas para la venta

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...

Slotted hole drilling machine with pneumatic height adjustment Duggle hole drilling on two levels in one clamping Motor power 1.5 kW With Röhm two-jaw chuck 1 - 20mm Pneumatic adjustment of the machining height by foot pedal, dowels on two levels without repositioning. Transverse adjustment approx. 240mm, infinitely variable or in 16/22/25/32mm increments Maximum height adjustment approx. 135mm Drilling stroke approx. 145mm Table size approx. 700 x 380mm pneumatic workpiece clamp Fixed stop and adjustable angle stop from +45 to -45 degrees Grid rail for quick adjustment on the side of the grid Driving equipment Extraction connection Parts repainted Pressure reducer renewed Dimensions approx. 950 x 1200 x 1300mm (LxWxH), weight 320kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse ...

Rung and slotted hole drilling machine T 140 with angle adjustment Special drilling machine for staircase construction, window construction. Oblique dowels and picket holes can be easily realized thanks to the rotatable drilling unit. Motor pole switchable, two speeds Motor power 1.4 / 1.8 kW, 1380 / 2810rpm Starting the engine with a practical handle switch Röhm two-jaw chuck up to 20mm capacity Linear laser for exact positioning of the workpiece Drilling unit can be rotated 63 degrees to the left and right The desired drilling height can be adjusted with a hand crank and digital counter Transverse adjustment approx. 320mm, infinitely variable Maximum height adjustment approx. 60mm above table height Drilling stroke approx. 140mm 2 pneumatic workpiece clamps Chassis Pressure rubbers renewed Few paint spots repaired Dimensions approx. 1180 x 1000 x 1250mm (LxWxH), ...

Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece  ...

SPECIFICATIONS: Number of drill bits: 35 (1/2 right - 1/2 left) Drilling distance mm: 32 Table width mm: 1250 03 Clamping jacks Installed capacity KW: 3.0 Electrical/pneumatic operation  ... más información

CNC machining center Homag type DRILLTEQ V500 Specifications: • For machining: workpieces made of wood or wood-like materials • Peak Usage Time (Hours): 3430 • Speed of axes - vector speed (m/min.): X/Y = 50 • Speed of axes - vector speed (m/min.): Z = 15 • Package configuration equipment: 2V10/32MM, 2H6X/2Y, N1X-Y90, F1-HSK10KW, W4 • 2 independent (SPLIT HEAD) CNC-controlled supports: suitable for accommodating machining units, can be moved automatically in the Y and Z directions via ball screw • Drill gear: V10/32MM HIGH SPEED including quick-change system and spindle clamping • Spindle spacing (mm): 32 • Spindle type: individually controllable • Horizontal drill gear: with 6 spindles X-direction • Horizontal drilling unit: with 6 drilling spindles that can be called up individually via program • 6 drilling spindles: pitch 32 mm • Spindle typ ...

Working length: 1,800 mm equipped with: -2 drilling units with three drills -Insertion device for pot hole hinges -2 Bohraggregte for hinges, etc.  ... más información

21 +3 Drill 4 supports Horizontal feed of the drill head You can call or write to us. We can speak and write German and Russian. You can also send messages in English 5.1.4  ... más información

Mechanical compression Tidy You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.2.5.  ... más información

double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

You can call or write to us. We can speak and write German and Russian. You can also send messages in English 5.1.1.  ... más información

PANHANS 116 YOC 1987 Motor power: 1.5 kW Rated current: 3.5 A 2-lever operation max. drilling depth: 130 mm Height adjustment: 135 mm max. slotted hole length: 240 mm Height adjustment via handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Length stop 1 eccentric Workpiece clamping Suction device: Connection 100 mm Table size: 520 x 290 mm Weight: 220 kg Dimensions (approx. dimensions): W: 90 cm D: 125 cm H: 115 cm

Servo motor vector axis scm Record complete Tamagawa TRE TS3351N16E196, Encoders EH38M500Z5L6X3PR Tested used part  ... más información

Würth Hand drill G&-5077-M36LJ  ... más información

Code: 0019 Brand: REIMALL Model: 105 Multiple boring machine Worktable dimension mm 1000 x 500 N° 2 movable motors Vertical stroke of worktable mm 120 Weight kg 550  ... más información

SPECIFICATIONS: Working Area X: 4000 Working range Y: 1300 Working range Z: 270 C-axis Tool changing stations: 24 Copy milling unit Refrigeration unit Double-sided drilling unit for drilling locks Main motor power KW: 11 Work table: 8 controlled rails Waste conveyors Xilog Plus PC Software Control Vacuum pump capacity m³/h: 250 Protective Weight approx. kg: 5000

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,  ... más información

- Machining width max. 800mm - Workpiece thickness Max. 80mm - for further technical data see PDF  ... más información

Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall ...