prensas usadas para la venta

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Frame press pneumatic Pressing dimension L 3550 mm x H 1850 mm 3 pneumatic punches from the top 1 sliding press bar from the right with 2 pneumat. Cylinders Bearing surface on the press cylinder 100 x 80 mm Dimensions: Length 4500 mm Width 600 mm Height 2500 mm Weight approx. 500 kg  ... más información

Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg< Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Working dimensions 250 cm x 110 cm You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 31.3.2.  ... más información

Code: 0797 Brand: VALENTINI MACCHINE - ITALY Model: 19 - 11 Pneumatic clamp desk for drawers, wooden elements , strip panels Technical data: Work table mm 1900 x 1100 Work table height mm 720 N° 4 positionable pneumatic pistons with adjustable stroke Positionable support squaring Compressed air 7 atm Overall dimensions mm 2050 x 1250 x 900 h Weight kg 850

Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0  ... más información

Code: 0578 Brand: SORMEC 2000 - ITALY Model: 10000 - Norme CE Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, insulation panels, laminates and various - CE standard Technical data: Working dimensions mm 10000 x 1500 Workpiece passage mm 2000 Opening mm 1000 Height of roller table mm 500 Motorised roller conveyor for workpiece feed with possibility of forward/backward movement N° 18 pistons diameter mm 70 N° 2 hydraulic power unit Pistons opening/closing choiceor Pressing timer Safety protection nets Power Kw 10,3 Compressed air 7 bar Overall dimensions: mm 10500 x 2300 x 3300 h Weight kg 19000

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table  ... más información

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Embossing press - embossing machine Hydraulic Pressing surface, 600 x 2700mm Heated pressing surface  ... más información

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Electric hydraulic frame press model HAT 30 / 20, 3 upper, 2 side cylinders pressing range 3000 x 2000, Year of construction 86  ... más información

pneumatic carcass press with 4 pressure elements from above 2 sides working area 3200 x 1600 - YOC 1975  ... más información

Edge press with preheating device, hydraulics, clamping length 2500 mm, mobile.  ... más información

Press with press area 2200 x 1100 with built-in mould press  ... más información

Heating bed length 3m Wood types FI, AI, LÄ, DG, ZI L-lamella width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target power/shift: 1500 average. Up to 2000 m2 / SCHICHT 1273 - 2073 mm 1500 average. Up to 2000 m2 / S

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...