rociadoras de cola usadas para la venta

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

Hot melt contour edge bander Make: VITAP Type: SMART New machine For straight and shaped (convex or concave) pieces - To glue pieces 10-60 mm thickness, - PVC / melamine / veneer / plastic / laminate / solid wood - Edge 0,5 - 3 mm - 1 glue spreading roller 10-60 mm thickness - Guillotine to cut bands up to 3 mm thickness - 2 tape feeding speed (3m/min or 7 m/min) - Tape plate d=520mm - Glue pot 1kg capacity Solid Phenolic table - Easy to clean - No transmission of heat - Plastic cups to raise the piece above the table. So the panel weight is not focused on the glued band. - Electronic temperature control - Foot pedal cutting system - CE standards Optional for an extra charge available - Vitap glue 2 kg - Vitap glue 10 kg

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

Granulate supply Make: ADOLPH Type: G-Trans 25 for continuous granulate supply on edge banding machines technical details: System for a machine line with 4 pre-melters (standard) Pos.1.1 1 basic unit for bag-emptying G-Trans® 25 Portal for Big-Bags with hanging emptying: Solid steel frame in 40 mm square-tube profile, torsion-stiff welded construction, main pillars with base plate for dowel-anchorage. Solid steel welded construction in square-tube profile, with fork-lift lugs, 4 hooks and tapered guide pins for easy touchdown on the portal. Sufficient stability for 1.500 kg weight. Supporting area with bars and stacking corners. Material container in powder-coated steel, with cone for free-flowing bulk materials. Filler plug diam. 300 mm. Filler opening 350 x 350 mm with sliding cover. 5/8 plugs for granules transport NW 25 Stack frame  ...

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.  ... más información

Oscillating buffing unit HOMAG  ... más información

Spiked roller WEHRMANN for better gluing on solid wood / plywood  ... más información

Stripe breaking device IMA  ... más información

PU preheater IMA 2,5 kg  ... más información

Radius profile scraper IMA 08.263  ... más información

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

Radius profile scraper IMA Type: 08.515  ... más información

Buffing unit - 1 motor  ... más información

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

1 gebr. Kantenbearbeitungsstraße IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Bj. 1996 Bestehend aus: - Doppelseitige Beschickung BIESSE RBO - Doppelseitige IMA COMBIMA für die Längsbearbeitung: Doppelzerspaner 2 x Fräsen Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappaggregat Bündfräsen 2 x Feinfräsen Profilziehklinge Flächenziehklinge Schwabbelaggregat Glätteaggregat - Drehvorrichtung von läng auf quer - Doppelseitige IMA COMBIMA für Querbearbeitung Schutzfräsen Doppelzerspannen Nutfräsaggregat Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappen am Oberdruck (Nachrüstung auf aktuelles Modell) Bündigfräsen Feinfräsen 2 x MFA Fräsen Nutfräsaggregat Profilziehklinge Fl ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Werkstückrückführung Fabrikat: BARGSTEDT Typ: TFU 02/L/33/67 Baujahr: 1991 Bestehend aus: - Luftkissentisch - 2 angetriebene Gurtbänder - Auslaufröllchentisch Strom: 380V/50Hz/16A Steuerspannung: 220V ... más información

eins. Kantenanleimmaschine Fabrikat: IMA Typ: Novimat Systems/I/G80/1000 Baujahr: 2011 Linksmaschine Vorschub 6-30 m/Min. Technische Daten: Werkstück Länge min. 150 mm Breite 150 - 2000 mm Dicke 10 - 50 mm Gewicht max. 50 kg Werkstoff: Spanplatte, MDF Kantenmaterial Rollenmaterial 0,8 - 3 mm Kantenhöhe 22 - 54 mm Kantenlänge min. 250 mm Ausstattung Verstellachse für Einlauflineal Einzugsvorrichtung Formatbearbeitungsaggregat zum Schutzfräsen Formatbearbeitungsaggregat zum Fertigfräsen (2 Motore, Gleich-/Gegenlauf) Verleimaggregat VTG (Ausführung nur mit Dioden-Laser) Kappaggregat 08.42 (2 Motore) Fräs-/Fasggregate (2 Motore, oben/unten) Mehrfachbearbeitungsaagregate 08.355 - 08.355 Ziehklingenaggregat Schwabbelaggregat Hinweis: Die technischen Daten und Beschreibungen sind Abschrift der damaligen Auftragsbestätigung. Daten dienen zur Inf ...

Electric pneumatic edge press Haug HFK 2200 for pressing edge material on wood with heating. Incl. 3 table extensions Swivel worktable, Working size max. approx.: 1,400 x 2,500mm, heater: 1,7 kW ... más información

 ... más información