Fabricante:
(Categoría: 205)
Description: Type of work Drilling Routing X axis working area 6000 mm Y axis working area 1850 mm Working Table Pod and Rail Main Electrospindle power 7.5 KW Number of controlled axes 4 axes Total number of drilling spindles 42 Total number of tool changer positions 7 No. of Rails 10 Vacuum pump ROUTER SPINDLES Unit : top No. controlled axes : 4 Automatic tool change : yes Motor power : 7.5 kw GROOVING UNIT , Max. tool diameter : 160 mm Motor power : 3 KW TOOL MAGAZINE , No. positions : 7 Tool : positioned on the machining head Control system NC 1000 TOOLS NOT INCLUDED  ,Approx. Onsite Dimension. (l x w x h): 7,700 x 3,400 x 3,000 mm, weight approx.: 7,000 kg
Description: Nesting table with table size 4,750 x 1,200 mm, electrospindle with HSK63F tool holder, 12-place tool magazine TOMASSINI Automatic panel magazine with suction cup loader, storage space 8,800 x 4,000 mmserial number: AA1/013639, Approx. Onsite Dimension. (l x w x h): 13,800 x 8,000 x 4,800 mm, weight approx.: 10,000 kg
Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. to ...
Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003
Description: Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mmApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg ... más información
Description: Machining range : -X: 4335mm -Y: 1300mm -Z: 180mm -X/Y axis travel speed: 78 m/ min -Z axis linear speed: 25 rpm -Electro spindle 12KW HSK63F liquid cooled -Milling head 2.2kw -Remote control -Bar code reader -VECTOR 'C' AXIS for 360° rotation and positioning of the angular heads with automatic adjustment of the rotation by numerical control -Spindle cooling system with liquid -Independent fixed blade group - for grooving in 'X' direction -Rear tool change magazine with nr. 12 positions -Additional pick up tool magazine 10 positions -Programming and control system on PC WINDOWS Drilling head: -12 independent chucks for vertical drilling in 'X' direction -6 independent spindles for vertical drilling in 'Y' direction -4 spindles for horizontal drilling in 'X' direction -2 spindles for horizontal drilling in 'Y' direction Machine sold without tools or accessoriesApprox. Onsit ...
TECHNICAL DATA: Field X: 4320 Field Y: 1550 Workspace Z: 280 02 Main engines Kw: 8 x 2 Tool change positions: 8 x 2 Worktop: Console table Software: Fanuc 180 Number of milling spindles: 2 Max g/min rotation speed: 18000 Horizontal drill tips X: 8 Horizontal drilling tips Y: 18 Number of bars: 8 Vacuum pump: 2 Pump capacity for empty m3/h: 150 x 2 Chip conveyor belt
Power Control PC85, Woodwop, ATC 12-speed, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum occupancy, edge height max. 65 mm, chip and remnant disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled
- max mortise depth 150 mm- max mortise length 340 mm- stroke 300 x 80 mm- head rotation +/- 45?- min/max workpiece height 600/1000 mm- table size 460 x 135 mm- tilting of the table +/- 45?- motor 2,2 kW- frontal clamp- automatic chain lubrication ... más información
Description: Type of work Drilling Routing X axis working area 3060 mm Y axis working area 1395 mm Working Table Pod and Rail Main Electrospindle power 9 KW Number of controlled axes 3 axes Total number of drilling spindles 28 Total number of tool changer positions 7 X axis work area 2971 mm Y axis work area 1395 mm No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 6 Vacuum pump yes No. pumps 1 Single capacity 250 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 20 Horizontal Boring Spindles in X : 6 Horizontal Boring Spindles in Y : 2 Total number of vertical + horizontal spindles : 28 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 3 Automatic tool change : yes Motor power : 9 kw Tool magazine 1 TOOL MAGAZINE 1 No. positions : 7 Tool : positioned on the machining head Control system WINDOWS XP Machine programming ...
Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004
SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels
Description: Gluing System EVA Hotmelt Corner Rounding Unit , Max Panel Width 210 mm Min. panel height 10 mm Max. panel height 30 mm Min. panel length 115 mm Max. panel length 2500 mm Min. panel width 30 mm Max. panel width 210 mm Edge coil magazine , NO. EDGE PROCESSING UNITS 1 Processing Unit : fine trimming to trim and roundApprox. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Description: X: 4500mm Y: 1300mm Z: 180mm 4 Axes 250m3/h vacuum pump ATS work table with 4 suction trolleys Predisposition for ATS vices and clamps 16 suction cups Horizontal milling head 5 HP ROTARY tool magazine on 16position carriage Rapid ROTARY tool magazine 6 Positions Electrospindle 12 HP HSK63 F Vertical and horizontal drilling block 16 chucks Machine sold wthout tools or accessoriesApprox. Onsite Dimension. (l x w x h): 7,450 x 4,570 x 3,500 mm, weight approx.: 2,800 kg
Description: atlas machining centre tubeless version x' axis travel = 6000 mm power supply 400v 50hz euroalimentation anuba ac power pack anuba plug diam.13 vertical support for milling unit 0/90pn straight position n.2 15hp index hsk f63 milling unit fixed head with 2 outlets blade holder d=220 + milling cutter holder - hsk 63 f tool holder 14 pos. on hsk63 carriage side front right position DRILL HEAD saw for longitudinal cuts frequency inverter 11 kw 8 suction pads 114X140MM - H 100 (to be confirmed) 12 suction pads 125x75MM - H 100 longitudinal (to be confirmed) 2 suction pads 114x140mm - H 75 for locking. Template (to be confirmed) 3 additional vacuum devices for workpiece clamping 2 additional pneumatic vertical presses - 1 mvt. - h 100 (to be confirmed) 2 horizontal pneumatic vices (to be confirmed) 10-bar positioning + suction cups on display EC safety standards for atlas bati xl ...
SECOND-HAND WORKING CENTER 4 AXIS BIESSE MOD. 37 XL - working dimension X 6000 - work dimension Y 1850 - work dimension Z 180 - 1 router - power router Kw 12 - C axis interpolating - tool clamping system HSK F63 - tool changing positions 21 - vertical drilling spindles 20 - horizontal drilling spindles X 6 - horizontal drilling spindles Y 2 - pod and rail table - n. 10 consoles - vacuump pump 250 m3/h - ATS - CE RULES (YEAR 2004)
I sell a 3-axis CNC machining center SCM Morbidelli Author A630S with truss table Year of construction 2004. Configuration: 3-axis main spindle SCM 6.6kW 24,000 rpm Tool magazines 2 x 6 positions ISO30 on the head Second 3-axis main spindle SCM 6.6kW 24,000 rpm Second tool magazine 6 positions ISO30 on the head 1x groove saw X-direction Drill head 12+4+4 drilling spindle fully equipped Usable work surface 3050x1370 x Z 180mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Pump Gardner Denver 215/260 m3/h. Xilog Plus new software with operating instructions. Very good condition. Available the same.
Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use through pneumatic height adjustment Double-hole drilling on two levels in one clamping operation Motor power 1.5 kW Starting the engine with a practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without moving. The desired drilling heights can be set for each drilling level with a digital counter, and switching is then carried out pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in 12mm grid Stop for longitudinal adjustment during slotted hole milling 2 swivelling workpiece ...
x-travel: 2940 mmy-travel: 700 mmz-travel: 850 mmControl: Siemens 840 D total power requirement: 75 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: mTechnical specifications:Traverse X/Y/Z 2940 x 700 x 850 mmPendulum stroke with vertical spindle left/right 1170/1170 mmSpindle speeds 30 - 4000 rpm.AC hollow shaft motor, power 45 kW at 40% EDMax. torque 286 Nm at 40% EDTool holder SK 50Equipment:CNC control Siemens 840 DAutomatic CNC swivel head, B-axis under 2.5°directly programmable from X (-) 90° to X (+) 90°Locking via Hirth toothingTapping without compensating chuckCNC rotary tableMeasuring system Heidenhain, direct linearTool changer with 26 tool placesChip conveyorCoolant system with high-pressure pump and belt filter systemSpace requirements:Machine length 5800 mm + 1700 mm with chip conveyorMachine width 3300 mm plus control panelMachine height 3200 mmThe da ...
Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben<CRLF>1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging: ...