subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 212)
Workpiece dimensions up to approx. 5 m. length, 250 mm widthSliding blocks for possible loading with singulatorTransverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x4 perpendicular stop rollers4 non-driven feed rollers1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/sWorking height 70 cmElectrical cabinet not included
Manufacturer: Wild, Type: Abstapelautomat, Year: 2001, Control: Bürkle, Work piece width min-max mm: 500-1250, Min.-max. workpiece length in mm: 500-3000, Min.-max. workpiece height in mm: 3-25, Vacuum feeding: yes, Longitudinal feeding: yes, Stacking pattern, double-row: mehrspurig, Stack height in mm: 1000, Cycles approx.: 6, Removal of protective boards: yes, Erection in a pit: no, Drain roller operation: yes, Year :2001
Manufacturer: Maskiner Verpackungsanlage Laminat, Year: 2001, Cycles approx.: ca.6, Feeding belt mm: 200, Foil wrapping machine mm: Maskiner , Foil stations: 2, Intermediate transport mm: 1500, Shrinking tunnel mm: 3500, Outlet conveyor mm: 2500, Schrumpftunnel kW Leistung: ca.30, Foil 1 width mm: ca max.650 mm, Foil 2 width mm: ca max.650 mm, Through running hight mm: 200, Working width mm: 300, Year :2001
Manufacturer: Scherenhubrollenbahn, Year: ca 2001, Length mm: 4800, Width mm: 710, Total hight mm: 260, Hand switch: yes, Safety strip: yes, Carriage: no, built-on roller conveyor: yes, FREE TEXT: Rollenteilung 80 40 Rolle, Year :ca 2001 ... más información
Length 6.04 m.Roll width 40 cmRoller diameter 75 mmBelt driveCenter distance of the rollers approx. 50 cmWorking height adjustable 85 - 95 cmElectrical cabinet not included ... más información
I am selling a stacking system HOMAG BARGSTEDT TBH22/D/25/12, built in 2001. Destacking system One-sided guide Spout also suitable for pallets. Postural head vacuum shoe system. Vacuum system (with pump) Automatic loading. Entry table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Enters feed roller stazion for quilted material. Security fences fully complete ! Working capacity Approx. 8 cycles / min Available right away. Ready for use, possible to test. With CE certificate and full documentation.
SPECIFICATIONS Inlet opening mm: 1000 x 720 Installed capacity KW: 18.5 Voltage: 380 volts Hourly output: 300 kg Screen diameter mm: 10 Hydraulic pump 13 cm3 - 1000 rpm Complete with control cabinet and cover ... más información
Manufacturer: Biesse, Type: RBO GP 90, Year: 2002, Angular transfer: yes, Working length max mm: 3000, Working lenght min mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-50, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000/1300, roller diameter mm: 80, Engine power kW: 3,55, Wight approx. kg: 800, Year :2002
Manufacturer: Bürkle Zentrierollengang, Year: 2002, Control: no, Working length mm: 4500, Working widht mm: 1400, Engine power kW: 0,75, Durchmesser Rolle mm: 75, Rollenmittenabstand: ca.200 mm, angetrieben über Flachriemen: yes, Stop straightedge: yes, Pneumatically controlled: yes, Anschlaglineal verstellbar: yes, Anschlagkante Höhenverstellbar: no, Freilaufrollen: no, Year :2002
Manufacturer: Bürkle Transportband, Year: 2002, Working length mm: 3000, Working widht mm: 1400, UV-Band: no, Belt width: 1420, Own controller: no, Bandsteuerung : no, Engine power kW: 0,5, Feeding speed min-max m/min: 6-30, elektronisch regelbar: möglich, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :2002
Manufacturer: Wemhöner, Type: AWF, Year: 2002, Control: no, Working length mm: 1700, Working widht mm: 380<CRLF>, Total hight mm: 900, Belt width: 300, Frequency converter: yes, Total hight mm: 900, Engine power kW: 0,55, Required space L x W x H mm: 1800x500x1000, Weight approx. kg: 150, FREE TEXT: Bauhhöhe versetllbar, Year :2002
Manufacturer: Mepac , Type: 20-18S, Year: ca.2002, Control: Programm, Hydraulikal power kW: 4, Ballenpresse: yes, Pressdruck kN/ to: 18 to, Einfüllöffnung b x h x L mm: 1080620980, Zylinderhub/Zycluszeit mm/ sec: 715/25, Ballenmass b mm x l mm x h mm : 1100700800, Ballengewicht kg: 150-250, Ballen 80 - 230 kg , Year :ca.2002
Drying kiln of capacity of cu.m 80 INTERNAL DIMENSIONS 9000 x 7000 x h net 4100 mm nr. 6 Fans INVERTER for ventilation control Nominal range of each fan 30.000 m3/h Water heating fluid 90° C – At12 Humidification system by Nozzles at high nebulizing power Expelling Chimneys Control at 6 wood Probes Deflectors for air canalization
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002 ... más información
In line 90? panel turning devicePanels entering crosswise, turning them to lengthwiseFence side at the leftPanel sizes:-Width from 220 mm to 1000 mm-Length from 320 mm to 3200 mmThe panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machineConsisting of: -First roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW-Clamping and turning device-Fixed fence-Second roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW
In line 90? panel turning device (or transport crosswise without turning)Panels entering lengthwise, turning them to crosswiseFence side at the leftPanel sizes:-Width from 220 mm to 1000 mm-Length from 320 mm to 3200 mmThe panels are transported on a roller conveyor, they are taken by 2 clamping discs iin order to turn them freely without friction and are placed back on a roller conveyor bringing them to the next machineConsisting of: -First roller conveyor with inclined driven rollers, length 3000 mm and width 1500 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjustable from 20 to 80 m/min, power installed 1,1 kW, additional roller coveyor aside in case of transport without turning-Adjustable fence-Clamping and turning device-Second roller conveyor with inclined driven rollers, length 1500 mm and width 3000 mm, rollers are soft pvc covered, centers 150 mm, feedspeed adjus ...
Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition ... más información
Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition ... más información
Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003 ... más información