- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTREX (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARI (1)
- ARNO (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (3)
- ASTROFAN (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BANK (1)
- BARTELS (1)
- BAS (1)
- BAUER (11)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (1)
- BETTER PACKAGES (1)
- BIG (7)
- Bito (2)
- BLACK STEEL (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BORG WARNER (1)
- BOSCH (7)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOTECH (1)
- BRAZILIAN SHIPYARDS (1)
- BRIWATECH (2)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BURGENER (1)
- BUSCH (1)
- BWB (1)
- BWF (3)
- BÜCHEL (1)
- BÖLLHOFF (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMFIL (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CODEMA SYSTEMS (1)
- Cold Jet (2)
- COMAC (1)
- CONCEPT LASER (1)
- CONEMASTER (1)
- CONTEC (1)
- CTS (2)
- CUSTOM MADE (1)
- DAEWOO (4)
- DAIKIN (1)
- DANFOSS (1)
- DANOBAT (1)
- DATACOLOR (1)
- DBK DAVID+BAADER (1)
- DEGUSSA (1)
- Dehoust (2)
- ... más
Fabricante:
(Categoría: 2500)
Año de construcción: 2024
usado
1 € Description: Self-locking traction magnet - 200 kgApprox. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 10 kg ... más información
Año de construcción: 2024
usado
1 € Description: Supply voltage: 12V Power: 19W Flow rate: up to 15 l/min Outlet: 16mm Pump diameter: 38mmApprox. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg ... más información
Año de construcción: 2024
usado
1 € Description: Water pump with 230 volt power supply floatApprox. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 10 kg ... más información
Año de construcción: 2024
usado
1 € Description: Engine type: 2-stroke, 1-cylinder, air-cooled Displacement: 52 cm3 Fuel mixture: 25:1 Maximum rpm: 3200-3300 rpm Bore & Pitch: 44mm x 34mm (1.73' x 1.34') Trim system: manual tilt Ignition: CDI Motion transmission: centrifugal clutch Start: manual Gear ratio: 2.08 (27/13) Integrated fuel tank: 1100 mlApprox. Onsite Dimension. (l x w x h): 800 x 200 x 200 mm, weight approx.: 15 kg
Año de construcción: 2022
usado
1 € Description: Quick charge charger Voltage 230 V, power 1200-2000W, output 12-24V, equipped with booster functionApprox. Onsite Dimension. (l x w x h): 700 x 400 x 400 mm, weight approx.: 15 kg ... más información
Año de construcción: 2024
usado
1 € Description: The set includes 2 ramps They can be used open and folded Open load capacity: 250kg per piece or 500kg per pair Folded load capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mmApprox. Onsite Dimension. (l x w x h): 1,000 x 200 x 200 mm, weight approx.: 10 kg ... más información
Año de construcción: 2024
usado
1 € Description: Seaming press for PEX-AL-PEX pipes 16-32 mmApprox. Onsite Dimension. (l x w x h): 400 x 200 x 200 mm, weight approx.: 10 kg ... más información
Año de construcción: 2023
usado
1 € Description: Outdoor shed composed of a steel structure and PE sheet, measuring 9 x 3 x 2.55 metersApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 25 kg ... más información
Año de construcción: 2024
usado
1 € Description: Inlet pressure: 6 - 8 bar Grease outlet pressure: 300 - 400 bar Capacity 16 litres Pressure ratio: 50:1 Pumping capacity 0.85 L/min Air consumption: 120 l/min 4 m long lubrication hoseApprox. Onsite Dimension. (l x w x h): 800 x 400 x 400 mm, weight approx.: 15 kg ... más información
Año de construcción: 2024
usado
1 € Description: Power: 250W Supply voltage: 230V Temperature setting range: 100 - 450°C Temperature Control: Level 1: 100°C Level 2: 160°C Level 3: 230°C Level 4: 360°C Level 5: 450°CApprox. Onsite Dimension. (l x w x h): 200 x 100 x 100 mm, weight approx.: 1 kg ... más información
Año de construcción: 2024
usado
1 € Description: Load capacity: 1000kg Chain length: 3 meters Chain Link Wire Diameter: 6mm Hardened steel hooks Steel chainApprox. Onsite Dimension. (l x w x h): 400 x 300 x 200 mm, weight approx.: 5 kg ... más información
Año de construcción: 2024
usado
1 € Description: Material: steel, sintered carbide Hole saw diameters: 30, 40, 65, 80, 100 mm Hole saw height: 75 mm Mounting: SDS-Plus, SDS-MaxApprox. Onsite Dimension. (l x w x h): 200 x 150 x 100 mm, weight approx.: 1 kg ... más información
Año de construcción: 2024
usado
1 € Description: Material: High quality CV steel Connection: 1/2' Working range: 28 – 210 Nm Switch: right/left Length: 460mm Standard: tested according to DIN EN ISO 6789Approx. Onsite Dimension. (l x w x h): 300 x 100 x 100 mm, weight approx.: 3 kg ... más información
Año de construcción: 2024
usado
1 € Description: Made of HSS steel Shank: 1/4 inch hex Blade angle: 90o Number of countersinks in the set: 6 pieces. Maximum hole diameter: 6.3mm, 8.3mm, 10.4mm, 12.4mm, 16.5mm, 20.5mmApprox. Onsite Dimension. (l x w x h): 100 x 100 x 100 mm, weight approx.: 1 kg ... más información
Año de construcción: 2024
usado
1 € Description: Intended use: for wood Tip length: 230 mm Mounting bracket: 6 points Tipes dimensions [mm]: 6, 8, 10, 12, 16, 18Approx. Onsite Dimension. (l x w x h): 150 x 150 x 100 mm, weight approx.: 1 kg ... más información
Año de construcción: 2024
usado
1 € Description: Continuous power: 250W Pulse power: 500W Input voltage: 12V Output voltage: 230V Waveform: Modified sine waveApprox. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg ... más información
Año de construcción: 2024
usado
1 € Description: Self-locking traction magnet - 600 kgApprox. Onsite Dimension. (l x w x h): 300 x 200 x 200 mm, weight approx.: 10 kg ... más información
Año de construcción: 2024
usado
1 € Description: The set consists of 13 hole saws, a 300 mm extension, 2 hole saw holders. For metal and wood.Approx. Onsite Dimension. (l x w x h): 250 x 200 x 100 mm, weight approx.: 2 kg ... más información
Año de construcción: 2024
usado
1 € Description: 3mm x 1.5mm – 20 pieces 4.4mm x 2mm - 20 pieces 5mm x 2mm - 18 pieces 7mm x 1.5mm – 23 pieces 10mm x 1.5mm – 23 pieces 13mm x 1.5mm – 23 pieces 10mm x 2.5mm – 14 pieces 11mm x 2.5mm – 13 pieces 13mm x 2.5mm – 14 pieces 14mm x 2.5mm – 13 pieces 16mm x 2.5mm – 14 pieces 18mm x 2.5mm – 14 pieces 19mm x 2.5mm – 13 pieces 21mm x 2.5mm – 14 pieces 22mm x 2.5mm – 13 pieces 18mm x 3.5mm - Pack of 10 20mm x 3.5mm - Pack of 10 22mm x 3.5mm - Pack of 10 23.5mm x 3.5mm - Pack of 10 25mm x 3.5mm - Pack of 10 26.5mm x 3.5mm - Pack of 10 28mm x 3.5mm - Pack of 10 30mm x 3.5mm - Pack of 10 31mm x 3.5mm - Pack of 10 33mm x 3.5mm - Pack of 10 34.5mm x 3.5mm - Pack of 10 36mm x 3.5mm - Pack of 10 38mm x 3.5mm - Pack of 10 41mm x 3.5mm - Pack of 10 44mm x 3.5mm - Pack of 10 47mm x 3.5mm - Pack of 10 50mm x 3.5mm - Pack of 10Approx. Onsite Dimension. (l x w x h): 200 x ...
Año de construcción: 2024
usado
1 € Description: Type: Four-stroke combustion engine, air-cooled Displacement: 196 cm3 Maximum power: 6.5 HP Rotation speed: 3600 rpm Shaft Thickness: 20mm Oil level sensor: YES Fuel: unleaded petrol Ignition: electric Departure: manual, rope Engine support: 4 screwsApprox. Onsite Dimension. (l x w x h): 400 x 450 x 400 mm, weight approx.: 15 kg