Fabricante:
(Categoría: 2500)
Used GENIUS B-640 Compact optical sorter. Principle of operation: The product is evenly distributed on the conveyor belt and scanned by cameras and / or lasers on both sides of the different control zones. A few milliseconds later, the defects are rejected in 1 or 2 separate jets by powerful air guns located at the end of the feed belt. A good product continues its way through processing. Electrical requirements Voltage: 400V 3-phase (+ neutral and protective conductor) Power: 4kVA Frequency: 50Hz Compressed air requirements Minimum pressure: 6-7 bar (90-100 PSI) (At the entrance of the sorter) Normal consumption: 400/1500 L / min Maximum consumption: 10,000 L / min Water requirements Water pressure: between 1 and 3 bar Temperature: between 5 ° C and 12 ° C
This STEINHAUER eCAB workCenter HS was manufactured in 2006 in Germany. Machining outer parts of control cabinets and mounting plates. It features a spindle motor operating at 18,000 rpm and offers 12 tool positions with SK30 compatibility. It includes special construction for holding chamfered panels with a depth of up to 290mm and a panel length of 2250mm, with a slot width of up to 10mm. Contact us anytime for further information.
This LVD Strippit Global 30 1525 Punching machine was manufactured in the year 2006 in the United States. It is equipped with a Fanuc Series 180i- PB control unit. The machine has a punching force of 300 kN. ... más información
EKRA Automatic Screen and Template Printer Spare Parts Dispenser with Cooling Unit Functional: not tested Condition: used, no operating instructions available Model No.: X6 HSP Weight: 930 kg Year of construction: 2007 Voltage: 400 V Frequency: 50/60 Hz Working voltage: 24 V Phases: 3 Power: 2.0 kW Fuse: 16 A Pressure: 6 bar Dimensions: 1890 x 1700 x 1610 mm If you have any questions, inquiries or the like, please send us an e-mail.
The device was mainly used as a demonstration device (commercial agency). That's why it only has 107 working hours. After a general overhaul in 2020 (1400 €) only 1 use. 400V 32A; 70 liter tank (thus full operation 3.5 hours); Steam temp. 165° or 195° C; working pressure: 6.5 or 9.5 bar. For better use, the steam hose and control cable have been extended. In addition: 1 surface cleaner, special cleaning agent approx. 30 litres
Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder ... más información
Description: Industrial chiller Serial number EKP1922 400 V 50 Hz A max/FLA: 178 kW max: 111 CE StandardsApprox. Onsite Dimension. (l x w x h): 4,425 x 2,260 x 2,185 mm, weight approx.: 3,645 kg ... más información
Description: Vacuum lifter with vacuum pump Load capacity 400kgApprox. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 1,200 mm, weight approx.: 200 kg ... más información
This DÃRR ECOCLEAN 70c washer machine was built in the year 2007 and has 38472 production hours. ... más información
This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm. ... más información
This Jeti 3300 Industrial Printer was manufactured in the year 2007 in Canada. The machine has a psi of 100-150 min-max. ... más información
This Durma RP9 1250x20 punching machine was made in the year 2007 in Turkey. It is equipped with a Siemens 840 control unit. The machine has a punching force of 200 kN. Set of tools included. ... más información
This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit. ... más información
This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. ... más información
Description: serial number: 06/0349 Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 2,000 mm, weight approx.: 500 kg ... más información
Description: Load capacity 2000 kg, load 2150 kg, tare 122 kg, each approx. 1250 x 850 x 1000 mmApprox. Onsite Dimension. (l x w x h): 10,000 x 1,900 x 4,000 mm, weight approx.: 8,200 kg ... más información
Description: Load capacity 1500 kg, load 3250 k, tare 102 kg, each 1250 x 850 x 680 mm and 1250 x 850 x 1000 mmApprox. Onsite Dimension. (l x w x h): 10,000 x 4,000 x 6,000 mm, weight approx.: 10,000 kg ... más información
Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer. ... más información
Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Components of the ...
Description: including base frameApprox. Onsite Dimension. (l x w x h): 850 x 330 x 1,070 mm, weight approx.: 150 kg ... más información