- A. MEIER (1)
- ABAKUS (1)
- ABAWERK (1)
- Adixen (2)
- AERMEC (1)
- AERO-LIFT (1)
- AERZEN (1)
- AGROTOP (1)
- AIR LIQUIDE (1)
- AIRFLEX (1)
- AIRMEX (1)
- AIRPEL (1)
- ALFA LAVAL (1)
- ALFA-LAVAL (1)
- ALLWEILER (1)
- ALTRONIC (1)
- AMADA (3)
- AMF PANEL (1)
- AMK (2)
- AMOT (2)
- ANGELANTONI (1)
- ANHUI ZHONGKE OPTIC- (1)
- ANYCUBIC (1)
- APC (1)
- APV (1)
- ARI (1)
- ARP (1)
- ARZUFFI (1)
- ASSFALG (3)
- ASTROFAN (1)
- ASUS (1)
- AT (2)
- ATEC (1)
- ATLAS COPCO (1)
- ATOM (1)
- AVK (1)
- AVOCENT (1)
- BAC (1)
- BACHER (1)
- BANK (1)
- BARTELS (1)
- BARTH (4)
- BAS (1)
- BAUER (11)
- BAYERN TOOLS (5)
- BBC (1)
- BEHR (1)
- BERGER (1)
- BERNARDO (1)
- BESSEY (2)
- BETTER PACKAGES (1)
- BIG (6)
- Bito (2)
- BLOKSMA (1)
- BLUE CLEAN (1)
- BOC Edwards (2)
- BOEKELS (1)
- BOFA (6)
- BOLL + KIRCH (1)
- BONNET (1)
- BORG WARNER (1)
- BOSCH (8)
- BOSCH REXROTH (1)
- BOSCHERT (2)
- BOSTITCH (1)
- BRAZILIAN SHIPYARDS (1)
- BRIWATECH (2)
- BRIXO (1)
- BRUGMAN (1)
- BRYAN DONKIN RMG (1)
- BUDERUS (1)
- BURGENER (1)
- BUSCH (1)
- BWB (1)
- BÜCHEL (1)
- BÖLLHOFF (1)
- CA-02 (1)
- CALAMIT (1)
- CAME (1)
- CAMPER (1)
- CANNON AFROS (2)
- Capstone (2)
- CAR JACK (1)
- CASADEI (1)
- CASE TECH (1)
- CATERPILLAR (1)
- CBRAILLON (1)
- CCD (1)
- CIVIEMME (1)
- CODEMA SYSTEMS (1)
- Cold Jet (2)
- COMAC (1)
- CONCEPT LASER (1)
- CONEMASTER (1)
- CONTEC (1)
- CTS (1)
- CUSTOM MADE (1)
- DAF (1)
- DAIKIN (1)
- DANFOSS (1)
- ... más
Fabricante:
(Categoría: 2500)
Año de construcción: 2011
usado
1.500 € Description: Refrigeration system: Refrigerant R404/A Capacity 15.8 kg Ts= -10 to + 125 °C Ps= 35 bar HP Ps= 20 bar LP Air system: Ts= -10 to + 60 °C Ps= 16 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 1,350 x 2,250 mm, weight approx.: 610 kg ... más información
Año de construcción: 2011
usado
20.000 € Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg
Año de construcción: 2011
usado
25.000 € Description: HIGH-PRESSURE FOAMING MACHINE CANNON A-COMPACT 200 FC Possible discharge rate up to 2,600 g/s at a mixing ratio of 1 : 1 (polyol: isocyanate) Tank group Component tank, volume 250 litres Agitator on the polyol tank One mixing head type Cannon FPL 24 HP Hydraulic unit, volume 75 litres with heat exchanger Hose line polyol, isocyanate, hydraulics up to interface A ,Motors with frequency inverter Dosing unit with two Cannon axial piston pumps, 55 cm3/rev Magnetic coupling on the isocyanate pump Touch screen control panel SIEMENS TP 177 6' SIEMENS S7 control system CHILLER ,FRIGOSYSTEM RACA/C 30 Capacity 2000 l/h Dimensions 800x600x1200 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 3,000 kg
Año de construcción: 2011
usado
80 € Approx. Onsite Dimension. (l x w x h): 700 x 450 x 550 mm, weight approx.: 95 kg ... más información
Año de construcción: 2011
usado
250 € Description: Serial number: 01.00056 Operating voltage: 230 V Frequency: 50/60 Hz Connection: 1 kW Rated current: 10 A Diameter of the turntable: approx. 1500 mm Attention: the machine can be transported on a normal standard truckApprox. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 3,500 mm, weight approx.: 500 kg
Año de construcción: 2011
usado
50 € Description: Seriennummer: 021140569 Operating voltage: 380 - 480 V Rated current: 4.1 A Connection: 1.75 kWApprox. Onsite Dimension. (l x w x h): 600 x 500 x 1,400 mm, weight approx.: 80 kg ... más información
Año de construcción: 2011
usado
920 € Description: - Fire pump system - It includes: - GRUNDFOS 82EN0019K main pump, power 15KW - GRUNDFOS CR3-15 X-A-A-E-HQQE jockey pump, power 1.10 KW-2853 rpm - GRUNDFOS control panelsApprox. Onsite Dimension. (l x w x h): 2,000 x 900 x 1,900 mm, weight approx.: 400 kg ... más información
Año de construcción: 2011
usado
Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Año de construcción: 2011
usado
500 € Description: Volume flow: 320 m³/h Max. static pressure: 21000 PA Rated current: 7.0 A Control voltage: 230 V Supply voltage: 230 V Motor power: 1.2 kW Approx. Onsite Dimension. (l x w x h): 600 x 400 x 830 mm, weight approx.: 80 kg ... más información
Año de construcción: 2011
usado
This PETIG RPS-320 TWIN 3000 punching machine was manufactured in 2011. It features a Siemens 57 numerical control system and comes with a hydraulic unit RKP 23.0 for enhanced operation. The machine includes a linear feed table, switch cabinet, and both infeed and outfeed frames. Its equipped with a tool for punching a slotted hole measuring 20 x 5mm, making it highly effective for precise punching tasks in sheet metal processing. Consider the PETIG RPS-320 TWIN 3000 machine we have for sale. Reach out for more information.
Año de construcción: 2012
usado
140 € Description: Load capacity 3241 kg, designation number 12113001, further DIN standard guidelines: see photo of operating instructions, including storage boxApprox. Onsite Dimension. (l x w x h): 1,250 x 860 x 680 mm, weight approx.: 250 kg ... más información
Año de construcción: 2012
usado
190 € Description: Serial number: 10-521.119 Operating voltage: 400 V Frequency: 50 Hz Connection: 4 kW Rated current: 16 A Diameter: approx. 630 mmApprox. Onsite Dimension. (l x w x h): 900 x 850 x 1,200 mm, weight approx.: 300 kg ... más información
Año de construcción: 2012
usado
200 € Description: including filter cartridges 400 V connection Power 5000 W already dismantled Approx. Onsite Dimension. (l x w x h): 1,700 x 1,000 x 2,200 mm, weight approx.: 300 kg ... más información
Año de construcción: 2012
usado
800 € Description: Floor scrubber used - few operating hours including new batteries (2023, still originally packed in the box) 1.20m x 0.65m x 1.10m Batteries: disposable pallet 0.50m x 0.50mApprox. Onsite Dimension. (l x w x h): 1,200 x 650 x 110 mm, weight approx.: 50 kg ... más información
Año de construcción: 2012
usado
450 € Description: Frame trimmer Serial number ,2085 Power 1800W Speed 15m/s Max depth cut 155 mm ,Approx. Onsite Dimension. (l x w x h): 850 x 550 x 400 mm, weight approx.: 25 kg ... más información
Año de construcción: 2012
usado
1.000 € Description: incl. Air Liquide gas fittings Type: BM350-2UK 300/14 bar, M. KM cable gray P1: 300 bar P2: 12/16 bar Type: BM 352-2 UK P1: 300 bar P2: 6 bar Approx. Onsite Dimension. (l x w x h): 1,250 x 400 x 2,050 mm, weight approx.: 171 kg ... más información
Año de construcción: 2012
usado
50 € Description: For all other technical data, see type plateApprox. Onsite Dimension. (l x w x h): 500 x 470 x 1,180 mm, weight approx.: 100 kg ... más información
Año de construcción: 2012
usado
1.300 € Description: with nuts and screw feeder Workpieces : M6 x 15 press-in bolts max. feeding capacity: 15 screws / minute (1-lane) max. filling weight: 100 kg max. filling volume: 25 dm³ Voltage: 230 V Max. power consumption: 100 VA The workpieces, max. 100 kg or 25 dm³, are stored in the sorting machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and fed to the separator. A corresponding transport hose and a blast air nozzle are fitted behind the separator. Only one workpiece at a time is transported through the transport hose. HAN plugs, BUS modules and valve terminals can be used as electrical interfaces.Approx. Onsite Dimension. (l x w x h): 1,008 x 760 x 1,600 mm, weight approx.: 265 kg
Año de construcción: 2012
usado
Nominal diameter 40 mm, angle valve , 24 V , 2.5 W ... más información
Año de construcción: 2012
usado
Truck Trailer Mobile Fair BOOTH 180 m2 Utility bottle Year of construction 2012 19 tons Max 39 tons From 120 to 150 standing places Toilets man and woman separated Bar with dishwasher, sink and built-in oven Disabled elevator Assembly or disassembly in 4 hours with 4 people ... más información