extrusoras usadas para la venta

Extruder 1 screw: 60 mm Ø, 20 L/D, brand: Flag, geared motor: 7.5 hp. No electrical panel.  ... más información

x-travel: 980 mmy-travel: 1080 mmz-travel: 280 mmControl: table-size: 1.125 x 1.700 mmtable height: 800 mmdiameter: 435 mmspindle pitch: 16 x 5 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,08 x 1,98 x 2,0 mAccessories:- Tool changing station- TS20 probe- Clamping systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827  ... más información

materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration

Weber DS60 Twin screw extruder pipe machine Molds from 16 inches to 125 inches available Screws have been bought recently Capacity : 200 KG per hour ... más información

Bandera Extruder Tr 60 - Diam 28 Ld Year 1991 Material Pp - Pe 12 Zone Control Panel Cear Mlf 180 K engine DC Drive Motor Vecc130 Hp 40 -- 75 - 2500 Rpm ... más información

complete extrusion line for 3-layer Rolbatch film. The presented model has the catalog number 120/75 / 75-1800. The line is equipped with three extruders - ϕ120 (capacity -350 kg / h) and 2xϕ75 (capacity - 100 kg / h), screen changers, trapezoidal extrusion head, water tank, cooling unit, edge cutting device, winding devices and control system. Bolts, cylinders and long head are made of nitrided tool steel. The machine is operational, but is currently in storage and is not being produced. The most important technical data: Producer: Rolbatch Model: 120/75 / 75-1800 Sheet thickness: 0.3-0.5 mm Width:

Manufacturer Amut Model BA 92 Machine is like new, year 2020 Screw diameter : 92 mm ... más información

2022 Model Natron Makina production, like new, almost never used, technical information about the product is in the photos section. ... más información

AVITA EXTRUDER It is a single layer extruder with a single screw. Its production capacity is around 50/60 kg per hour. This machine is designed to make small and medium widths (with printing if necessary) in shrink or bundling. Year 2018 (commissioning 2020) very little served HD and comics production Maximum width 900 mm Double winder for film Micro perforation 2-color printing unit – 600 mm cylinder + sleeve cylinder 3 dies: 70 – 80 – 130 3 air rings 4-component Plast’control mixer

Mikrosan 90/23 PVC parallel extruder machine Capacity : 300 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one. ... más información

Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material ... más información

Jwell 92/188 Conical Twin Screw Extruder - Granular Line Machine has been used 1 year It is in excellent condition Capacity : 700 kg / hour It will be given with the granule front line. ... más información

Mikrosan 90/23 PVC parallel extruder machine Capacity : 350 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one. ... más información

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Granulation line consisting of: a system of gravimetric mixers TGP-5 for 4 components with pneumatic loaders of the TAL -920G brand 2018, with a capacity of 2x700 kg / h, an extruder Battenfeld BEX 2-107 / 22 with a receiving hopper, power -75 kW, productivity-600 kg / h; hot water ring cutting device, cyclone GXC2660 and storage hopper.

The complete line for extrusion of OMAM (co-extrusion) film consists of a set of devices that, in combination, enable the processing of thermoplastic materials, mainly polystyrene (HIPS) with a thickness of 0.2-2.5mm and a width of up to 1000mm (for film) and 0.5- 3.0mm and width up to 1000mm (for plates). Equipment production year 1996.   The main elements of the extrusion line are: dispensers TR 120 extruder TR 60 extruder flat head (nozzle) calender roller assembly extraction unit winder mill granulator console thermoregulation switchboard control panel  The maximum length of the extrusion line is 31.45m  Maximum embossing line width 7.88m  Maximum height of the extrusion line 4.01m  Technical data of TR 120 and TR 60 extruders cooperating with each other constituting an integral part of the device            ...

Mikrosan MCV 68/25D Extruder like new condition Working hours : 1100 LD rate : 25 Maximum PVC-U capacity : 200 KG/hour Calibration Table Pulling device Tilting Table ... más información

Bandera 60 extrusion line 25 kW, 400 V Year 1961 Diameter 60 L / D ratio 20 Variable V gearbox With electrical panel Gauge holder bench with vacuum pump and variable speed track drive, Pagani brand ... más información

Bausano granulation line Parallel screws, diameter 140 mm Plate screen changer for 200 mm screens the machine has been heavily modernized. The frame and gear are from 1979, but the other elements have been replaced. 1. Plasticizing system - (screws + cylinder) - 2021 2. Control cabinet + all wiring + all sensors - 2022 3. The entire material feeding and dosing system - 2021 4. Screen Changer - 1998