extrusoras usadas para la venta

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED REGRANULATION LINE for PE PP PC PS ABS PA, throughput rate 800 kg/h, including crammed feeding unit, extruder with screw diam. 150 mm.(5.91) 33 L/D, fan cooled barrel, 352 kw drive, vacuum degassing unit, semi-automatic sliding plate screen changer (possible addition of fully automatic screen-changer), POWER PACK, Filtec under water pelletizer, water filtering unit, heat exchanging unit, centrifugal dryer, electric wiring and cabinet new in 2004, This extruder has been constructed in 1997, and we offer it reconditioned, CAPACITY: 800 kg/h, MATERIALS: PE PP PS PC ABS PA, VACUUM DEGASSING POINTS: 1, AVAILABILITY: 5-6 weeks from confirmation

Mikrosan MCV 67/22D Double Screw Extruder Parallel screw New shaft sleeve New technology screen Machine is in very good condition ... más información

A refurbished extrusion recycling product EREMA Intarema Type 1714 TVEplus for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. High up-to-date technical standard. Capacity up to 1,200 kg/h, electrics 220 / 380 V 50 Hz, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

NEXTROM FCL21/HS Multi-layer Cast Film Line Materials to be processed: Barrier film / Stretch film / PP film / LDPE Extruders: Number of extruders: Extruder 1: diam. 140 mm; 244 kW motor Extruder 2: diam. 140 mm; 244 kW motor Extruder 3: diam. 75 mm; 120 kW motor Extruder 4: diam. 75 mm; 120 kW motor ABB drives for the extruders 2x90mm screws for trim feeding Die: Flat die type, Cloeren, year 2016 Lip width: 2600 mm Lip gap adjustable: from xx to xxx microns Film thickness 12-35 microns Heating: 64kW + 100 pc heating elements for profile regulation Output: Up to 1000 kg/hour depending on material formulation Chill-Roller: 2700 mm wide diam. 1000mm Winder: NEXTROM Winder, fully automatic roll change  Maximum line speed 900 m/min  Reels diameter up to 500 mm  Winding width 2000 mm Accessories:  Longitudinal film cutting unit   Edge trim cutting syst ...

complete production plant for shopping bags and bean handle/open mouth. System composed of: Tecom extruder 2 Flexo Stack Omat flexographic prints + Bielloni Mobert welder 2 Elba + Kmt die-cutting machines 2 Manzoni inline printing plants Semi-automatic flexible handle machine Flexloop” TECOM EXTRUDER rotating head, inverter motors consumption in operation 9kw/h Production yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Minimum band 18cm Maximum band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Machine in operation MOBERT Victory 800 Bio compost ready” WELDING MACHINE Totally overhauled and updated. Change from open mouth/bean bags in one click. Inverter/PLC/Touch screen control panel. Up to 3 tracks. Min cutting l ...

AMUT TWIN SCREW EXTRUDER FOR PIPES/PROFILES, Type BA92/22, constructed in 2004, parallel counter-rotating screws diam. 92 mm 22L/D, new screws and barrel, used for PVC window profiles, D.c. 59,5 kW drive, including 2 volumetric dosing units ... más información

AMUT PIPE-PROFILE EXTRUDER, twin screw extruder with screw Ø 67 mm. 22 L/D, Including:, 1.000 x 100 mm,pull off unit, reconditioned with totally renewed control panel, machine in excellent conditions ... más información

AMUT TWIN SCREW PIPE-PROFILE EXTRUDER, twin screw extruder with screw Ø 30 mm. 22 L/D, just extruder with control panel, machine in very good conditions, constructed in 2007 ... más información

AMUT PVC PIPES-PROFILES TWIN SCREW EXTRUDER, type BA 72/22, N.2 x 72 mm parallel, counter-rotating screws 22 L/D, Complete line including :, calibration desk CIemme Amut 3 mt., N.2 pumps, 35 kw drive, Vobau pull off unit max width 2.800 x 200 mm. for 650 mm.useful width, control cabinet ... más información

twin screw extruder Manufacturer Mikrosan Model MÇV 67/22D Year 2004 ... más información

IBAÑEZ 175 MONOLAYER LDPE EXTRUDER HEAD It is not the complete machine, only the head. ... más información

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling u ...

Coextrusion Blow film line 3 layers CMG 55/75/55LHE – SW 2200 TA Year of production 2018 1. Extruder A – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 2. Extruder B – Single screw extruder 7530/LHE - Screw diameter 75 mm - L/D ratio 30/1 - Extruder drive – 118 kW AC - Nominal output in LDPE MFI 1.0 275 kg/h - Lever type screen changer 3. Extruder C – Single screw extruder 5530/LHE - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 66 kW AC - Nominal output in LDPE MFI 1.0 130 kg/h - Lever type screen changer 4. 3-Layer Blow film co-extrusion die CBH500 F/3S-IBC with D 275 mm, LDPE, gap 1,6 mm 5. Internal bubble cooling system - Introduction air fan 7,5 kW with heat exchanger battery - Extraction air fan 7.5 kW - ...

Twin-screw extruder complete with gravimetric dispensers, water refrigeration system and bigbag weighing and filling system Sale of production line consisting of: • A BANDERA model 55LD42 twin-screw extruder; • A dispenser called “KYARA” positioned upstream of the extruder, in the part closest to the motor. The Kyara consists of four granule hoppers that mix up to four different materials. The mix obtained is then managed by a single main dispenser (DOS 1) positioned naturally also upstream of the twin-screw line. The charge of the four KYARA hoppers is completely automatic and managed by a blower positioned on the ground. The latter is connected with four lances which must each be inserted into a different bag of material that has been chosen mix. The mixture proportions are set by an operator directly on the panel control dedicated to the dispenser; â ...

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

Used Cincinnati conical twin-screw extruder model CMT 35. 2 pieces available: 1 pc. - new 1989 1 pc. - new 1990 Technical data: - drive: DC 9kW motor - heating zones: cylinder - 3, head - 3 - cylinder cooling - oil - vacuum degassing pump  ... más información

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

Composite Tube Extrusion Line: A- Extruder, brand: Sterling, 1 spindle: 60 mm Ø 25L/D, Motor: 25 hp with variable speed drive and electrical panel. B- Head for small tube: 0.5 mm and more. C- Water-cooled bathtub: 9 meters with pump and tank. D- Tow Cart, Brand: Mild Ltd Boston: 700x150, Motor Output: 1.5kw with variable speed drive. E- Double winder with guide: 600 mm Ø