otras máquinas para el plástico usadas para la venta

Year: 2000 - technically efficient, ready to work - after full service - manual feed - pneumatic profile clamping  ... más información

I would like to offer the UHG 500 Easy vacuum chamber. It was purchased in 2018 at a price of €24,980, has been in operation for a total of 510 hours and is in very good condition. In addition to two Memmert ovens (see attachment), the vacuum chamber also includes a handling table with a load capacity of 1,000 kg, a new silicone mixing attachment (for a drill). We will give the chamber a set of spare funnels, inserts, tubes, dividers, cups and anything else we can find for it. We are getting rid of the chamber due to the specialization of our company in 3D printing using stereolithography, due to capacity reasons it is no longer important for us to do vacuum casting as well. The buyer must arrange the transport, there is a loading ramp available.

Stratasys FORTUS 900mc 3D printer YOM 2015, USA Computer Numerical Control (CNC)- Brand: Touchworks Technology: Fused Filament Fabrication (FFF) Materials: Thermoplastics. Polymers/Thermoplastics: PLA, Polyesters, Polyamides, Polycarbonates, Styrenes: ABS, ASA, Polysulfones, Polyaryletherketone, Polyimides Two vials for main material 1508 cc Two vials for fixing material 1508 cc Automatic switching from one vial to another Feedstock format: Filament 95% rate of yield Total Installed Capacity: 7,5 kW Working volume (XYZ): 914.4 x 609.6 x 914.4 mm Details up to 200 kg Build volume 508.756164 L Min. layer thickness 0.51 mm X/Y accuracy: +/- .089 mm or +/- .0015 mm per mm, whichever is greater. Z part accuracy includes an additional tolerance of -0.000/+ slice height. Note: accuracy is geometry-dependent. The vacuum board is adapted for use with two sizes of construction s ...

Lemo Intermat V. 600 ST-N-400 , Year 1999 Machine for the production of wicketer bags HD-PE, LD-PE, LLD-PE, PP Capacity max. 210 bags/minute. Unwinder Max. width = 1350 mm (with brake and side edge control) Max. diameter = 1200mm, Sleeve = 6" Longitudinal separating unit (can also be used for perforation) Folding triangle to form a half tube. Folding unit for bottom gusset 2 punching units bridge with tools 1 punching unit for valves 1 separating seam welding device Pen stacker Data: Bag length 155 -520 mm incl. flap flap = 40 -60 mm, Bottom gusset =27-60 mm Bag width = 70 to 400 mm Test run is possible. The machine is well maintained.

MOBERT ROLLER 110 6M,, for pre-cut open top bags in a roll, packed in rolls with paper tape, for 1 - 2 - 3 lanes, different bottom shapes available, 2 lanes roll width 420 mm, 3 lanes roll width 300 mm, min roll width 150 mm, Max roll diameter 110 mm, minimum bag length 250 mm, max bag length 1.500 mm, Construction year 1997, Mother reel driven unwinder, max width 1.700 mm, slit and seal unit 1.700 mm. n.2 knives for 3 lanes, gusseting unit 1.600 mm 3 lanes, 2-lanes star-bottom folder, 2-lanes folder for C fold, n.2 automatic taping units, n.1 tension stabilizer for electric cabinet, excellent working conditions

A unique opportunity without intermediaries for people who want to become self-employed in the field of plastic injection molding! As of 1.3.24, we are actively discontinuing our activities in owner-managed plastic injection molding. We have been active in this field for several decades, both for our own products made of thermoplastics (ABS / POM / PC / glass fiber reinforced PA ), as well as on a contract basis for renowned companies. For sale we offer our small plastic injection moulding shop (without real estate and fixed building installations) as a whole - with currently 2 fully hydraulic Aarburg injection moulding machines type Allrounder 320-210-750 and 320-210-850 as well as all peripheral devices - all from well-known brand manufacturers, such as 2 Thermolift Arburg 100-2, various conveyor belts, various temperature control units oil and water, chiller for the cooling circuit ...

HOT AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. 4 mm.wide on the web as per photo, while slitting, Adjustable air-blow Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machineis offered RECONDITIONED and TESTED

Formlabs Form 3L Wholesome Package including Form Wash L and Form Cure L. All devices ran for a very short time: approx. 50 hours. Year of construction 2022, commissioning October 2022. Accessories: 2L each of Resin Tough 2000, High Temp, Rigid 10K and a separate tank for each type of resin., Installation space in mm (x/y/z): 335x200x300, Layer thickness: 25-300 microns, laser power: 2x 250mW, Resin refilling automatic or manual: Automatically, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0

EPS contour cutting line for the production of sloping roof, fillet and ridge panels, as well as freely programmable "contours". suitable for net block dimensions: 5300 x 1300 x 1300 mm. Version with oscillating panel cutting frame for the production of EPS sheets and special cuts. incl. block turner incl. automatic wire adjustment incl. trimming frame incl. plate chain conveyor incl. waste disposal incl. wire break detection (electronically controlled) incl. extensive documentation Visits are possible at any time by arrangement.

Year: 2003 - technically efficient, ready to work - after full service - for the upper and lower hinge - centering the element - SPS control  ... más información

MAMAMTA WIN 305 foil bag sealing machine Technical condition (on a scale of 1-10): 10 Year of manufacture 2018. 0 production mileage. Status - after startup. Possibility of testing. ... más información

Mark Two in great condition, like new with the following accessories:, Equipment:, 2x Onyx FFF filament - 800 cm³ spool, 3x Precise PLA FFF filament - 600 cm³ spool, 1x cleaning stick Precise PLA (desktop and X series), 1x carbon fiber CFF filament - 50 cm³ spool, 1x Kevlar CFF filament - 50 cm³ spool, 1x fiberglass CFF filament - 50 cm³ spool, 1x HSHT fiberglass CFF filament - 50 cm³ spool, 1x dry box for material storage Compact (desktop and X series), Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass) ...

Extruder welding machine, plastic welding machine, extrusion welding machine-Manufacturer: Munsch, extruder welding machine type SKR-Voltage: 230V-Welding wire: 5 rolls of Röchling Polystone P.grau-Cop Ø 3 mm-Price/tax: complete-Transport dimensions: 600/500/H400 mm-Total weight: 22.6 kg ... más información

Elwa bag machine +Dietrich electronik perforator , max. whidth sealing 1250mm , min. 300mm . Thickness from 2x0,02 -0.2 . Speed 110cycles/minute when was new . Needles collection for the bags. ... más información

1 piece of used corrugator suitable for the production of tubes ø 10-58 mm designed for overpressure production (no vacuum) Mold jaw chain length, designed for 40 pairs Manufacturer: Fränkische Type: F3UK Year of construction: 1989  ... más información

Fast mixer : 200 Liters, brand: Samstang, engine: 2 speeds 14/19 hp. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... más información

Used three-station slat banding machine by KURZ model LS101. New 1998. Allows trimming of three sides of the profile in one pass.  ... más información

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

BRANSON vibration welding machines KV-624H year `2012 & 2016  ... más información