subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 304)
Year 2011. (Not exploited) Types of packaging: • Flexible packaging • Semi-rigid packaging • Tight packaging Medium to high performance. • Ability to use various materials, such as flexible film, PS, PETS, PVC, HIPS, etc. • Maximum cycle speed of 18 cycles per minute for soft blister packaging and 10 cycles per minute for rigid blister packaging • Web width 400 mm • Cut length up to 320 mm • Depth molding 80 mm • Servo chain • Stainless steel construction.
Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful ...
HEMINGSTONE JP-40SE-SV Year 2002 Side sealing machine Bag size - Width 900 mm , Length 200-900 mm Available bottom sealing bar ... más información
Thermoformer Skin ULMA TFS 300 which has normally been modified to TFS 407 Year 2012 Width 422mm Feed pitch 250mm Dimensions: (L) 5.7m x (W) 1m x (H) 2m Two tools Selvedge rewinders Integrated labelling module ... más información
It is after renovation, and after replacing the control with relays The machine is in perfect condition It has gassing - protective atmosphere - MAP 320mm film Mold 300mm x 300mm Mold 2 x 150mm x 300mm Supplied with a vacuum pump and 2 km of foil. ... más información
Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...
A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )
Betapak Z 105 Automatic Thermoform Machine Machine is in very good condition Capacity : 6-8 cycles/min Based Film : PA+PE / PVC+PE / PET+PE Lid Film : PA+PE Max Depth: 90 mm ... más información
Format set for hardfoil trays 195 x 250 mm Foil width 422 mm For skinpack ... más información
Inert atmosphere packing machine with thermoforming, dimensions of 500x320mm; conveyor belt width 480mm; stainless steel construction; never used; ; The machine was never used ... más información
ULMA thermoforming machine model SUPRA from 2008 Width 422mm Double feed 250mm and 150mm Dimensions: (L) 6.3m x (W) 1.4m x (H) 2m 1 tool on the 155 pitch in round shape (bowl) Edge winders Motorised exit conveyor Integrated label dispenser Price to be discussed ... más información
Packaging machine (2008),but its in a very good condition, its like new because of the low useage. Our company had used it for packaging disposable medical devices. Every year we have done the necessary maintenance work on it. This machine is suitable for packaging in soft and hard folien as well.
The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.
The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...
This AMUT COMI AMP 630 GP/FL was manufactured in the year 2017. The machine has a film width of 2000 mm, and a mould area of 630 x 530 mm. ... más información
I will sell Armor thermoforming machine, 1990s, fully renovated and renovated, all electronic devices replaced. Fully functional. Working area 2000x1800x650. Vacuum included. bathtub: 2000x2700 mm ... más información
Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.
Technical Sheet of Thermoforming Machine Model: SF-VF-22-13-06p Year 2007 Brand: QS Group Status: For sale Delivery time: Immediately Description This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium productions of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum dimension of plates up to 2310 x 1360 mm. This is a machine in very good working order. • Maximum dimension of the plates: 2310 x 1360 mm • Thickness of the plates: up to 10 mm • Loading the plate and unloading the product: Manual Mold holder table: • Maximum stroke: 90 mm • Maximum mold height: 600 mm • Mold base height: 195 mm • Closing force: 27 kN • Contains: Stroke control with linear transducer, vacuum line for forming the part, water line for thermoregulation of the mo ...
COEMTER BAG MAKER for BAGS-ON-ROLL TER CORE, type 92-90 38-25, constructed in 2001, n.2 nearly equal machines available, For LDPE LLDPE HDPE, Max bag width 900 mm., The machine is offered checked for good conditions, Constructors description:, AUTOMATION OF THE MANUFACTURING PROCESS, Bag making machines in continuous for bags in roll with core, with two tracks, making point-of-sale bags, freezer bags, refuse collection bags, etc., Robust and high-tech construction with continuous movement design to guarantee maximum reliability and minimum and easy maintenance., The sealing drum makes possible to work at low temperatures thanks to the long sealing time, and offers excellent adaptability to different types of materials, with maximum sealing guarantee., Mixed sealing optional., Use of independent band aligners before rewinding for perfect roll making., Placement of core container at floor ...
A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content v ...