otras máquinas para el plástico usadas para la venta

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.  ... más información

For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy.  ... más información

SACMI line for plastic caps. Perfect condition.  ... más información

Automatic rotative machine for the moulding of car filters, air-oil, panel or circular, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of manufacture: Italy The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Specyfications: Available at 24 stations Turntable complete with 24 mould-holders Casting trolley with 2-axes Feeding machine for Polyurethane material Electronic control board to manage the functions of the machine Hourly output: from 200 to 350 pieces, according to the model of the machine, the utilized P.U. material and the mould -- Automatic rotary machine for forming car filters, air-oil filters, plate or round filters, with polyurethane seal Manufacturer: GUSBI S.P.A. Model: 24 stations Country of origin: Italy  ...

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request  ... más información

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

For sale is the following article: Metal separators for magnetic and non-ferrous metals Manufacturer: - More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional is still set up and connected to electricity. You are welcome to look at it and try it out. Pick-up by arrangement and dismantling possible promptly.

For sale is the following article: Amis Dust Collector Manufacturer: Amis More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Is still built up and connected to electricity. You are welcome to look at it and try it out. Pick-up by arrangement and dismantling possible promptly.

For sale is the following article: Metal separators for magnetic and non-ferrous metals Manufacturer: - More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional is still set up and connected to electricity. You are welcome to look at it and try it out. Pick-up by arrangement and dismantling possible promptly.

Sell a used 3D printing system, Manufacturer: 3D Systems, Type: ProJet 3510 SD 3D Printer, Printing mode: High definition, nice space (xyz): 298 x 185 x 203 mm, resolution ( xyz): up to 375 x 375 x 790 DPI/ 32 layer thickness, accuracy (typical): 0.0025 - 0.05 mm each 25.4 mm of partial dimension, email notification: yes, remote monitoring: yes, uvm Build Hours 953h In addition, a CAD program: 1 pc. Solidworks Network Installation FEE. 1 Liz. Solidworks 2015 Standard 3D â CAD. 1 Liz. Solidworks Professional 3D â CAD. 1 pc. MoldWorks + SplitWorks + ElectrodeWorks. 1 Liz. Solidworks Plastics Standard. SUB End of April 30, 2017

Elumatec cutting and machining center model SZB 620 Capacity: 120 units/change SBZ 610 (cutting + machining module for machining in pvc profials) SBZ 610 to SBZ 609 (manual steel insertion) with label printer SBZ 609 (reinforcement screwing, pvc + steel machining) Receiving table. The scope of processing in pvc: holes for drainage, venting, the importance of places for the installation of perimeter catches, milling holes for the installation of ventilators. Screwing steel reinforcements. The scope of processing in pvc + steel: holes for mounting the handle in the window, for mounting the post, holes for dowels. Very good technical condition, the machine has been working since 2017.

complete "package" with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification ... más información

vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis ... más información

new unit, vertical designed roller sizes : D = 355 x 900 mm width with post-cooling rollers with edge-trim device with puller, comeplete unit moveable by motor ... más información

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T  ... más información

Wide slot nozzle, used, according to signage. 1420 mm width, adjustable lip. Adjustable top lip.7-15mm approx Removable Bottom Lip Vertical Choker bar 20mm infeed port. Decals. Used, purchased as seen, without warranty or other warranty. Delivery ex works CH, immediately upon arrival payment.

For sale is a used automatic moulding machine from the manufacturer KURTZ. The exact details of the condition can be found in the pictures. Detailed data on the automatic moulding machine: Manufacturer: KURTZ GmbH/ Germany Year of manufacture: 1984 Manufacturing number: 582-84 Dimensions: l = 3.60 m x w = 2.40 m x h = 3.87 m Weight: 3,2 to The machine would be ready for collection from about 01.04.2022. After prior consultation, a visit to the article is of course also possible. The plant is currently still in operation and can be used until late. Will be inspected in production in mid-March.

For sale is a used automatic moulding machine from the manufacturer KURTZ. The exact details of the condition can be found in the pictures. Detailed data on the automatic moulding machine: Manufacturer: KURTZ GmbH/ Germany Year of manufacture: 1983 Manufacturing number: 47-466-83 Dimensions: l = 3.50 m x w = 2.10 m x h = 2.70 m Weight: 1,6 to The machine would be ready for collection from about 01.04.2022. After prior consultation, a visit to the article is of course also possible. The plant is currently still in operation and can be used until late. Will be inspected in production in mid-March.

Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015  ... más información

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.