Fabricante:
(Categoría: 1402)
40 used pallet trolleys / pallet trolleys with slight signs of wear, metal frame: 600 x 800 mm, ... más información
BALKANCAR T-10232 0,5T hoist was manufactured in 1970 in Bulgaria. The hoist is powered by a BALKANCAR КГ 1605-6 electric motor with a power of 0.75 kW and is designed to lift workpieces with a maximum weight of 500 kg, to a height of up to 12 metres. The buttons on the control pendant allows to determine the direction of movement of the workpieces in the up-down or right-left axis. The electric hoist has never been used and its weight is 154 kg. Technical specifications of the BALKANCAR T-10232 hoist - maximum lifting capacity: 500 kg - maximum lift height: 12 m - lifting speed: 8 m/min - travel speed: 20 m/min - cable diameter: 5.7 mm - electric motor: BALKANCAR КГ 1605-6 - power of electric motor: 0,75 kW - rotational speed of electric motor: 910 rpm - voltage: 200 V; 50 Hz - total weight of T 10232 device: 154 kg
Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling
Pneumatically operated. Diameter: 180 mm 200 mm 220 mm 250 mm ... más información
Groom Group Pneumatic suburban lifting beam with 2 x pneumatic chain hoists 40kN Type PVH K2/2x40kN Year of manufacture REP 08/2010 Factory No.: 078 Weight 980kg Serial No. 1313145 Total width approx. 4.7m Depth 0.6m Hoists 2x 40kn YOC 2010 Weight 980kg More available (approx. 15 pieces) e.g. SMT Scharf GmbH Lifting beam / Hubbalken HB-K2/P-3400 Load capacity 2x30kN Year of construction 2017 without chain hoists other smaller lifting beams / walkers with pneumatic chain hoists available (10 pieces) with suspension chassis, coupling (connector for several hoists).
Description: Platform Truck Used, very good condition Technical details : Weight: approx. 100 kg Width: 800 mm Length: 1200 mm Height: 410 mm Capacity: 500 kg Wheels 4 x Ø 250 mm ... más información
Probat valve rotary. Manufacturer: Probat GmbH ( Germany ) Type: 46 DN 315 Year: 2005 ... más información
Part One: Year 2011 - With a slow flow table 5000 x 1000 mm - In perfect condition Part Two: Year 1990 - In good condition ... más información
TECHNICAL SPECIFICATIONS Manufacturer: THYSSEN KRUPP Fördertechnick Description: Chain conveyor, scraper conveyor Type: OTK 440/1200x9408 Design: stationary, heavy version Year of construction: 2001 Drive type: slip-on geared motor, planetary gear Drive power: 55 kW Length chain conveyor: 9,400 mm Chain conveyor width: 1,200 mm
Roller conveyors, blue, approx. 10m, - used - : Price per meter ex location: only 65.-€ (net), dismantled and loaded! Manufacturer: Dematic Year of construction: unknown – probably 2008 Element width: approx. 75cm, Roll width: approx. 67cm Roll width approx. 5cm Element height: approx. 13cm Distance between the rolls varies, but mainly about 1.5cm Element lengths: different, but mainly 3m Condition: good Available: from now on Location: Frankfurt am Main – later Frankenberg warehouse (Saxony) suitable for this infiltration, curves and inclined roller conveyors RC 5710 = 90 degrees Inclined roller conveyors= 5502 approx. 3,50m
2 pieces rollable, un driven roller conveyors, approx. 2,50m length - used - : Price per piece ex location: 950.-€ (net), dismantled, packed and loaded! Manufacturer: Year of construction: Length approx. 2,50m Element width: c. 69cm Roll width: approx. 60cm Height: approx. 81cm Condition: good Available: from the end of Oct./Nov. 2021 Location: Tübingen
Roller conveyors, 50 and 58cm wide, - used - : Price / meter (net) from location: 65.-€, dismantled and loaded Matching curves 90 degrees: price 450.-€ (net) / piece Curves: approx. 40cm wide 90 degrees: price 350.-€ (net) / piece Price per foot: 50.-€ (net)! Manufacturer: Siemens Dematic Year built: unknown Type 1. approx. 50 to 100m Elementbriete: approx. 50cm Roll length approx. 43cm Roll width: approx. 5cm Roller spacing: approx. 6cm Element length: mainly 3m - but also some shorter pieces Type 2: - approx. 40m Elementbriete: approx. 58cm Roll length approx. 53cm Roll width: approx. 5cm Roller spacing: approx. 2cm Element length: 2m / 2.56m / 3m Condition: good Available: now Location: Frankenberg Camp (Saxony)
Seesaw with belt conveyor, approx. 5,65m - used - : Price per piece: 1.250.-€ (net), dismantled and loaded! (BF 3160) Manufacturer: Van der Lande Year built: unknown - probably 2008 Element width: approx. 75cm, Strap width: approx. 60cm Length: 2.55m plus 3.10m Total length approx. 5.65m Element height: approx. 18cm With pneumatic cylinder Overcomes a height difference of approx. 70cm The belt is slightly ribbed on one side
2 St. Bizerba, continuous scale for automated weighing, with belt conveyor and scanner, 60kg - used - : Price per piece: 4.950.-€ (net), dismantled and loaded! (W1-3120, W2-4130) Manufacturer: Bizerba IN motion ascale Model: CWL Eco flexx Built: 2013 Max: 60kg, d= 0.02kg 0 to 40 degrees 230V, 50HZ, 2.9A Element width: approx. 87cm, Strap width: approx. 60cm Length: about 1m Height approx. 85cm plus SEW Motor Accu-Sort systems Built. 2008
Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)
Scissor-bubtisch with driven roller conveyor - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Built: 2013 Type: Roller conveyor / scissor stroke table Length of roller conveyor: unknown Wide element approx. 75cm Roll length: approx. 68cm Roll width: approx. 5cm Element height: approx. 15cm Lifting height: currently approx. 78.5cm Engine: SEW Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)
Roller conveyors, Dematic, driven, approx. 1.30m wide, approx. 65m, - used - Price per meter (net) from location: 95.-€, dismantled and loaded! Manufacturer: Dematic Built: 2004 / 2013 Type: Roller conveyor Dimensions: Element width: approx. 1.30m Element length: approx. 1m = 2 Element length: approx. 1.23m = 1 Element length: approx. 1.25m = 4 Element length: approx. 1.62 = 2 Element length: approx. 2m = 2 Element length: approx. 2.06m = 1 Element length: approx. 2.36m = 8 Element length: approx. 2.44m = 8 Element length: approx. 2.74m = 1 Element length: approx. 2.87m = 2 Element length: approx. 3m = 8 Roll length: approx. 1.24m Roll width: approx. 5cm Distance between rolls: different e.g. 1cm, approx. 7cm Height: about 13cm Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)