La indicación de distancia no es posible porque no se pudo determinar su ubicación. El requisito previo es que su navegador permita las cookies y la determinación de la ubicación.

Fabricante:
(Categoría: 1402)

A+B 3
ABB 2
AEG 4
AKO 1
ARI 18
ARO 1
ASS 1
AXA 1
bar 3
BBC 1
BDL 2
BGS 1
BIG 1
BJM 2
BLB 1
BMW 1
BOA 1
BOSCH 146
BSA 1
CSM 1
DKF 6
DSG 2
EAR 1
ebm 8
EHT 1
EIMA 10
ELD 1
EMG 1
EMI 2
EMU 2
END 1
EP 2
ERA 1
ERL 2
ETN 1
FAG 10
FAV 1
Festo 412
FLT 2
FMA 1
FRB 1
GF 1
GIS 1
GPZ 3
GSL 7
Guss 38
H+L 1
HEW 1
HP 1
HPI 2
HS 1
HVB 1
IBC 1
IEM 3
ILC 1
otras máquinas para la manipulación mecánica
Máquina: NEUERO TA 12/15 FA 38 卸船设施
Número de artículo: 163533518
Año de construcción: 1988
usado

Ship unloading system TA 12/15 FA 38 of the manufacturer NEUERO Engelbrecht + Lemmerbrock GmbH & Co., Melle. Built in 1988 It is a pneumatic suction system for the extraction and conveyance of grain or similar pneumatically conveyable bulk materials from ships. Via a telescopic swivel arm and a suction nozzle, the material to be conveyed is sucked in by the air flow generated by the blower and conveyed into the suction separator. There, the material to be conveyed is separated from the suction air flow and discharged via the rotary valve. All motion drives of the telescopic boom are hydraulic. Electrical connection: 380 V Technical documentation of the manufacturer and various invoices for replacement parts available. A magnetic separator was retrofitted. The rotary valve was replaced in 2018 (EUR 8,875) and has not been used much since then. New filters available.  ...

otras máquinas para la manipulación mecánica
Máquina:   不锈钢运输手推车
Número de artículo: 163519066
usado
Precio: 45 €

25 pieces available  ... más información

otras máquinas para la manipulación mecánica
Máquina: LISSMAC Posimat PB 80 (气动搬运装置)
Número de artículo: 162173350
Año de construcción: 2014
usado
Precio: 15.000 €

The Posimat PB 80 is a pneumatically operated handling device. Version : with counterweight, suspended from on-site steel construction. Specifications: Load capacity: 120 kg; Hub; 1,600 mm; working range (radius) 2,600 mm; dead weight without counterweight and column: 150 kg The device was only in use for a few months.

otras máquinas para la manipulación mecánica
Máquina: UHDE 1200x1000mm ma220
Número de artículo: 18102236
usado

UHDE adjustable, vibrating feeder Lxw = 1200x1000mm Capaciteit 110 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220 380Volt 13Amp 50 Hz And new thyristor control.  ... más información

otras máquinas para la manipulación mecánica
Máquina: AEG 900x500mm
Número de artículo: 18102242
usado

AEG adjustable, vibrating feeder Lxw = 900x500mm Capaciteit 50 m3/h Adjustable from 0% to 100% With magnetic vibrator AEG MV 100/50 380Volt 9Amp 50 Hz And new thyristor control.  ... más información

otras máquinas para la manipulación mecánica
Máquina: AVITEQ verschiedene 振动给料机
Número de artículo: 88277476
usado

Different gutter ca 150st with and without sieve occupy 800x400mm MVC 50-3 1100x300mm MVC 50-3 1100x400mm MVC 50-3 1100x500mm MVE 50-3 1200x400mm MVD 50-4 with and without sieve 1200x800mm MV 100/50 1200x1000mm MA 220 1200x1500mm Vem 8 1250x400mm MVD 50-3.1 Sieve 1300x1200mm MA 220 1400x650mm MVES 50-1P 1400x800mm MV 100/50 1400x1100mm MA 440 1450x900mm MVES 50-1P 1450x1200mm MVFS 50-2P 1500x400mm MVE 50-3 1500x500mm MS 7.21 Sieve 1500x650mm MVE 50-3.1 1500x800mm MVE 50 1600x400mm MVD 50-2 1600x900mm MVES 50-1P 1600x1200mm MA440 1750x400mm MVD 50-2 1800x500mm MVE 33-1 1800x1400mm MV 900-5 1850x500 MVES 50-1p sieve 1900x900mm MVF 33-1 2000x400mm MVF 50-1 2250x400mm MVE 50-3.1 3350x400mm 2x MVD 50-2 3500x2000mm 2x Schenck DF3 7400x950mm DMW 1000v 7500x500mm 2 Jost ruttler 7500x750mm DF3

otras máquinas para la manipulación mecánica
Máquina: UHDE, AEG UND HONERT 1500x800mm
Número de artículo: 18102244
usado

adjustable, vibrating feeder. Lxw = 1500x800mm Capaciteit 100 m3/h Adjustable from 0% to 100% With magnetic vibrator MA 220, MVE50, M60/130, MV 100/50 And new thyristor control.  ... más información

otras máquinas para la manipulación mecánica
Máquina: AEG Aviteq
Número de artículo: 88277488
usado

Controllers Thyristor regelar. Type: SAE-G-1 400V 25Amp SAE-G-2 400V 25Amp SCE-EN50-2 400V 15Amp  ... más información

otras máquinas para la manipulación mecánica
Máquina: INDELFA HENSEN SD 214
Número de artículo: 18009653
nuevo
Precio: 750 €

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

otras máquinas para la manipulación mecánica
Máquina: INDELFA HENSEN SD110
Número de artículo: 18009655
usado
Precio: 550 €

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

otras máquinas para la manipulación mecánica
Máquina: UHDE Rinne 1200x600mm ma220
Número de artículo: 18102204
usado

UHDE adjustable Feeder, vibrating. Lxw = 1200x600mm Capaciteit 80 m3/h Adjustable from 0% to 100% With magnetic vibrator UHDE MA220 380Volt 16Amp 50 Hz IP54 And new thyristor control.  ... más información

otras máquinas para la manipulación mecánica
Máquina: TIGRIP TKG3.OVHS 600-3000 kg Crangabel,起重机装卸叉
Número de artículo: 163157584
usado
Precio: 499 €

-Load capacity: adjustable from 600 – 3000 kg -Effective height : from 1300 – 2000 mm -Tine length : 1000 mm Fvmfedlvq -Tine cross-section : 120 x 50 mm -Total height: 1720 – 2420 mm -Net weight : 260 kg These crane forks are equipped with adjustable tines, height adjustment and automatic weight compensation. In the case of self-balancing forks, the support tines tilt upwards when the load is lifted. This prevents the load from slipping out unintentionally. The suspension eyelet is movably mounted via a subframe. The automatic self-balancing is carried out by a gas pressure spring when the fork is loaded. This ensures that the suspension point is always in the centre of gravity of the fork and that the load picked up is transported absolutely safely.

otras máquinas para la manipulación mecánica
Máquina:  TKG 2,0 VHS 克兰加贝尔
Número de artículo: 161801677
usado
Precio: 650 €

Fork length 1000 mm, adjustable Weight 220 kg Extendable mounting height 1300 - 2000 mm Load capacity 0,4 - 2,0 t  ... más información

otras máquinas para la manipulación mecánica
Máquina:   装卸平台
Número de artículo: 163415523
usado
Precio: 650 €

8 pieces, aluminium dock levellers – used- : Price per piece ex site: 650.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Condition: good Available: now Location: Löhne  ... más información

otras máquinas para la manipulación mecánica
Máquina: WEIBERT 2,5t 托盘搬运车
Número de artículo: 162261397
nuevo
Precio: 647 €

Weibert 2,5t Pallet trucks Industrial and commercial execution with weighing device Display Lifting capacity 2500 kg max. fork height 192mm min. fork height 77mm Fork dimensions 1150x540mm Stroke 120mm Roll diameter 180/80mm Weight 99.5kg G&HM-HUBW CRADLE  ... más información

otras máquinas para la manipulación mecánica
Máquina:  triple 槽螺丝
Número de artículo: 157477920
usado

Triple flour-collecting screw conveyor in steel design Total length 6.2 m, outlet at 5.2 m Screw diameter 150 mm 1 m counter-rotating thread, slope 105 cleaning flaps, Wooden lid with folding boxes, 2 intermediate bearings each, motor 1.5 kw  ... más información

otras máquinas para la manipulación mecánica
Máquina: PUTZMEISTER 02V92 管道交叉
Número de artículo: 2870871
usado

used pipe points cleaning master / atlas type 02V92 construction year: In 1993 nominal width: DN200 nominal pressure: PN100 manual: no ... más información

otras máquinas para la manipulación mecánica
Máquina: HUMA HVA 240 闸阀
Número de artículo: 2835176
usado

HUMA Stop valve for thick mud pumps uses construction year: In 1993 type: HVA 240 nominal width: DN125 ... más información

otras máquinas para la manipulación mecánica
Máquina: KROHNE H250/RR/M40/HAT/ESK, 用于传热的浮子流量计
Número de artículo: 159454834
nuevo
Precio: 950 €

Variable area flow meter for heat transfer oil, H250/RR/M40/HAT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C Function guarantee! For sec ...

otras máquinas para la manipulación mecánica
Máquina: WEIBERT  手推车
Número de artículo: 159181060
usado

Trolley high with retaining bracket for panels, windows, doors, etc. L= 2000mm W= 1200mm H= 1000mm Run length 300mm G&-4960  ... más información