otras máquinas de envasado usadas para la venta

Jumbo reel Truck from Tetra Pak for handling packaging material reels. Model SH 8ES/3 from 2004. It is an electrical model.  ... más información

Hot needle micro perforation machine, make LaserPin (IT), year 2020, - Usable width for micro-perforation = 1400 mm, - Maximum speed = 250 meters/minute, - Diameter of holes = 0.3mm to 2.8mm, - Maximum temperature = 400°C, - Heating power = 37 KW, - Touchscreen control panel, The machine was bought in mid-2020 and only used for less than 100 hours, HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles., The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps., This technology creates homogeneous holes and was developed in the 80s., An industrial standard control cabinet system with WiFi modem (purchased separately and, configured) for wireless connection to any existing inline production system., User-friendly and multilingual control panel with addition ...

Automatic feeder GEA, type Shingle Loader 600, 3-lane insert, without line distributor,, for format 2.3,, 2 buffer sections, 3 insert portions on the belts,, knife edge tape,, removed, is dry in storage. ... más información

Bouncing lid - sealing machine, make TBL, type LVS - 04.6, year 2/2008, was used to force open a plastic closure on plastic cans (chewing gum),, Lid press station with Taktomat type XP50 code: 04-240, machine number P80024, Strap length: approx. 2,400 mm, smooth black strap, usable width: approx. 70 mm,, Working height: 940 mm, +/- 50 mm,, Aluminum casing, Compressed air requirement: at least 6 bar,

Inv. Num. : 6788 Type: GN1406TM Producer: GN Canada Created: 2016 Parameters: Equipment: Refrigeration unit EURO CHILLER GC A 015 Extensions for plastic coffee mats (80 mm) Moulding area: 320 mm x 150 mm Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material thickness range: 0.25mm-1.2mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 Machine dimensions: 2400 mm x 1750 mm x 2050 mm Machine weight: 1000 kg After overhauling the main shaft and the motor, the machine is

OCS-Check Weight WIPOTEC INOT3 further information on request  ... más información

Automatic overwrapper. PLC: Siemens, type Simatic S7-300.  ... más información

PA 182 rotary tray sealing machine Serial No: 1744182F15074 Cycles 50 Power: 240V  ... más información

Loma IQ3 Metal detector Stainless, belt dimensions 3500mm x 460mm, aperture 550mm x 320mm, stop and start with alarm, 3ph  ... más información

Liia packing, banding machine, oven, guillotine, wrapping machine Professional Packing Line - The whole set as the pictures.  ... más información

Carbon dioxide laser for label marking. Supports high line speeds. Laser-optimised fonts for high-speed marking, including standard fonts and Unicode.Labels can also be marked with graphics (.bmp, .plt, .dxf formats). Over 60 different types of barcodes can be printed on labels, as well as traceability codes and serialisation data. Operation via graphical user interface. Extraction of smoke and dirt by Domino DPX 1500 and DPX 3500., Additional title: label marking, Capacity: 40000 Fl/h, Wavelength: 10 µm, Ambient temprature: 40 °C, Air humidity: 90 % RH non condensing, Power: 1,05 kW, Voltage: 90-264 V, Frequency: 47-63 Hz, Features: control touch panel, extraction systems DPX 1500 and DPX 3500

FFP2 Mask Machine Mask Production Line Manufacturer: Ruhlamat Type: MPL FFP2/016 Year of construction: 2020 Mask Production Line N95/FFP2 Maske Dimensions LxWxH installation: 8921 x 1494 x 1985 mm Free space around the system: 1500 mm circumferential 50 Hz / 2.6 kVa Pressure: 6 bar Weight approx.: 2500 kg FFP2 masks consist of 3-6 layers of fleece. This machine can produce masks with up to 6 layers. The machine consists of five stations Station 1 = Reel Station 2 = punching, noseband and welding, embossing roller Station 3.1 = Printing and Welding Earband Station 3.2 = Alignment of folding edge Sation 4: = Welding Contour and Cutting Mask

Anpapp-Presse und Falzeinbrennmaschine Schmedt PraeForm HHS 20  Case Press and Joint-Setting machine Schmedt PraeForm HHS 20  Baujahr / Year 02/1981 - Serial-Nr. 09  Buchhoehe / Book height: 100 - 520mm  Buchbreite / Block width: 120 - 400mm  Blockstaerke / Block tickness:: 8 - 100mm  Leistung / Output: ca. 150 St/h  Pressluftanschluss / Air supply: 6bar  Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW  Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Unused ultrasonic sealer for plastic tubes. Power supply (V/Hz) 230/50 Operating frequency (kHz) 20 Sealing width (mm) 80 Power (W) 1500 Size of work surface (mm) 300 x 325 Dimensions of device (mm) 1100 x 650 x 530 Weight of device (kg) 75 Horizontal ultrasonic sealling machine for tubes of thermoplastics (PP, PC, PU, PA, PBT, PES, PVC, PM, etc.) with adjustable: welding time, sonotrode descent speed, welding pressure, welding depth, number (count) of welded tubes. The heat needed for ultrasonic welding is obtained by vibration of material particles.

Keber brand case packer (Kosme group) year 2002  ... más información

Rotary tablet press Killian, model T300-32 EU-B Year of construction: 1996 One pair presser rollers respectively for pre-pressure and main pressure. Designed for high press speeds; operated mainly from the front using the hour hand wheels, the controls and via the terminal. Excellent, in full working condition. Technical Information: - Height with hopper: 1852mm (height without hopper: 1692mm) - Machine weight: 1950kg - Max tablet diameter: 16mm - Max fill depth: 16mm - Max output: 240,000 tablets per hour - Max operating pressure 80kN - B type machine – EUR B - 32 stations - Fill System - force feeder Electrical upgrade in 2010 – new PLC and touch screen HMI.

Yawa MW 1050 Age: 2012 Stripping Die cutting Max. size: 750 x 1050 mm Max. cutting size: 730 x 1040 mm Max. cutting pressure: 250 t Cutting tool format: 760 x 1120 mm Stack height in feeder: 850 mm  ... más información

VINDEX OW-1 stretch wrapping machine is used in many industries to wrap high and heavy loads with stretch film. After selecting the appropriate button on the control cabinet, the process is fully automatic, reducing the time required for wrapping and increasing productivity at the same time. Distinguished by its robust and stable design, the VINDEX automatic pallet wrapping machine has run for a small amount of time during testing and is ready to be implemented in the storage process. Technical specifications of the VINDEX OW-1 pallet wrapping machine - maximum load height: 2100 mm - maximum pallet weight: 2500 kg - maximum pallet dimensions (L x W): 1200 x 800 mm - power supply: 1-phase

Stanzautomat / Punching Machine Plastograph PZ 599Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlaenge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punchAuslage Ruettler / Delivery Jogger Panel Operation and ControlsOnline-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Heiber & Schrouder, year: 1998, model: CE 650-1, with single track, with servo motor forming, blank formats: width 100mm - 650mm, length: 100mm - 450mm, materials: cardboard from 200 g/m² upwards, Conical/clamshell box forming machine, Year: 1998, model: CE 650-1, Length: 100mm - 450mm, Blank formats: width 100mm - 650mm