subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 505)
DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical ... más información
RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg ... más información
RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg
Automatic control: At the push of a button, the machine automatically closes the pre-loading box and the upper Lid (the pestle is extended). Then the front lid opens and the bale is ejected. Then the front lid (the upper one) closes The lid opens and the pestle goes back and the machine waits for another push of a button (filling the pre-load box). Metal press RMH 33 S_ 30 x 30 (new machine type: metal press) Manufacturer: RMH Type: RMH 33 Package dimensions in cm: 30 x 30 x material Package Weight: 30 - 50 kg Total weight: 5500 kg Dimensions Box (WxHxL): 30 x 50 x 100 cm Dimensions Machine (WxHxL): 120 x 85 x 410 cm / without preload box Cycle time: 60 seconds Drive: 30 KW Compression force: 60 T Horizontal ramming compression force: 100 T Working pressure: 300 bar Control: Automatic
Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal
Manufacturer: Mc Intyre Knife length: 508 mm Opening of measurement: 250 mm Cutting capacity: 120 tons Round iron ST 37: 67 mm diameter Number of strokes at 1/4 opening: 100 per minute Number of strokes at full opening: 20 per minute Dimensions ( L x W x H ): 1650 x 915 x 1490 mm Weight: 1143 kg Drive: 7.5 kw / 400 V Operation: foot pedal Alligator scissors JMC 500 HD The JMC 500 HD has a hydraulic holder. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket.
Ladies and gentlemen, we offer: Alligator scissors shepherds: Type: Proto III Drive: 18.5 KW Number of cuts per minute: 22 Measuring opening Knife tip: 310 mm Knife length: 810 mm Weight: 6.8 tons Machine has been overhauled. Control cabinet renewed ... más información
The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal
Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal
This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical
This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg ... más información
This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. Processing of the cable pages at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are is carried out in the two-blade system either both knife independently to adjust continuous or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical
Manufacturer: Diebels GbR recycling machines Cutting capacity: 30 ton Materials:-Aluminium (cylinder heads), brass (taps), copper, etc. Special features: work desk side folding Weight: 1100 kg Drive: 7,5 kw / 400 V Control: foot pedal ... más información
Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm ... más información
This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min
Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm ... más información
Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm ... más información
Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm ... más información