otras máquinas para la eliminación de residuos y reciclaje usadas para la venta

tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: width x length x height (approx. 94 x 76 x140 cm) Total height: approx. 118 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with various sheet steel boxes. All information without guarantee

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

Made in Germany Electrostatic Suction capacity: max 1800 m³/h, Fan power free suction 2400 m³/h, Engine power: 0.75 kW, (Siemens), Dimensions: L 1,765 x W 670 x H 700 mm Weight: 130 kg, Operating voltage: 400 VAC, 50 Hz, Power consumption, 1.85 Va  ... más información

ID2836 Construction waste sorting plant / Bauschutt-Sortieranlage year/Year of construction 1995 Construction waste sorting plant, throughput capacity 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting system consisting of: bunker conveyor Screening machine (cup screen) Chain conveyor for coarse material Palmiste Tape conveyor belt various chain conveyors Conveyor belts for fines and leftovers screening machine Palm Reading Tape (Ergobelt) Conveyor belt rev. and moveable Electromagnetic belt separator sorting booth Sifter System various conveyor belts sorting status compressor Additional heating for sorting cabin Construction waste sorting plant, throughput 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting plant consisting of: Bunker conveyors Screening machine (cup scree ...

ID2842 Knott BSS 19 Evolution year/Bauahr 2017 2995 hours/hours Ballistic disc party Ballistic Disc Separator  ... más información

JAW CRUSHER CATERPILLAR MOBILE Manufacturer: Atlas Copco Austria Type: PC 1055 J Weight 32500 kg Year of construction 2014 Operating hours 2400 h I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. Dismantling, loading and shipping on request! I will be happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Treatment plant (quarry, construction waste)MFL Machine Factory Liezen Radmobile plant Impact crusher MFL RCI 100.130; Hewitt-Robins Vibration Vibrator; Spitzer Silo substructure type SK248; control and all attachments, conveyor belts motor, etc. plant is running. Contact via email: info@germantp.com

External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm  ... más información

Panel size: 630 mm x 630 mm, Number of plates: expanded from 15 to 30 Panel thickness: 50 mm Cake thickness: 25 mm Hydraulics: motorized Filtrate drain: open Weight; 1500 kg (approx.) Pressure: 15 bar (max. feed pressure). The press is still in operation and will be used for industrial wastewater treatment. Discharge chutes below the filter press.

Panel size: 630 mm x 630 mm, Number of plates: expanded from 25 to 50 Panel thickness: 50 mm Cake thickness: 25 mm Hydraulics: motorized Filtrate drain: open Weight; 1500 kg (approx.) Pressure: 15 bar (max. feed pressure), Diaphragm pump Closing pressure at the pressure gauge 380 bar Hydraulic; Type GL KES 401-50 Machine dimensions: L 4450 x W 1700 with protective grille x H 1700 mm. Discharge shaft can be taken along. The plant was regularly serviced. The press is still in operation and is used for industrial wastewater treatment. Discharge chutes below the filter press.

complete device Filter area: 0.18 m2 Air output 1100 m3/h Flow temperature 5-45 C° Engine 1.45 kW-230/400V 50 Hz  ... más información

Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

Wiedenmann foliage loading blower KLB 645, Honda 4-stroke gasoline engine GX 240, 6.0 kw/8 hp, turbine approx. 380 mm, with suspension for side wall. Incl. telescopic gallows and approx. 3 m suction hose with suction nozzle and handle as well as settling frame with lift. Ready-to-use good condition.

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Condition: like new, never used MatrixCompactor 140 All-in-one Units are designed to capture, convey, cut, collect and compact adhesive matrix and edge trim waste from all process machines. They can handle matrix and edge trim from 1 process machine and if edge trim only up to 4 process machines. Configuration of Granulator(s) is customised to the material and number of process machines. Maximum width of matrix Up to 550mm (22") Maximum air capacity 1,600 m³ / hour (940 CFM) Maximum speed 150 m / min (490 FPM) Maximum pipe size Dia. 160 mm (6") transfer Maximum suction distance Up to 10 m (32 feet) Size (LxWxH) 2.212x820x2.110 mm (6'-11" x 3'-3" x 7'-0") Weight 680 kg (1,500 lbs.) Motor fan 2,2kW (3 HP) Motor compactor 2,2kW (3 HP) Power 3 Phase, 230-460V, 50-60 Hz Sound 68-72 dB (A)

Stroke length of the ram min. 120 mm .max. 320 mm Table diameter 630 mm Machine dimensions 2.45 m / 1.81 m / 2.89 m Machine weight 5,2 t

High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of construction: 2014 Volume: 4.72 m³/s Temperature: 20°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 470 kg The fan is intended for transporting shredded paper/cardboard. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our  ...